
Compound CIGS
Compound CIGS production process and HORIBA's products supporting this process.

Compound CIGS
Below you can see the different stages during the Compound CIGS production process. Please click on each phase in order to see the products that are avaialble to you during this stage.
Resistivity meter having the 2-channel carbon sensor. Measurement range: 0 - 100.0 MΩ・cm
Measures the conductivity ranging from purified water up to 2000 µS/cm for pharmaceuticals, food, and cosmetics applications
Measure the ultra-low density of silica at the finest sensitivity of 0.01 µg/L (0.01 ppb).
Redirecting to Chemical Concentration Monitors page
EMAX ENERGY combined with SEM is an energy dispersive X-ray analyzer which is suited for foreign material and composition analysis. It matches the samples in many applications.
Analyzer is designed to provide pertinent...
The GD-Profiler 2™ provides fast, simultaneous analysis of all elements of interest including the gases nitrogen, oxygen, hydrogen and chlorine. It is an ideal tool for thin film characterization and process studies.
High spectral resolution analytical Raman microscope for ultimate performance and flexibility; includes UV Raman configuration, full automation and wide range of accessories.
Single point analysis and automated hyperspectral imaging.
Dual vacuum modes.
Spot sizes from 1.2 mm to 10 µm.
Redirecting to Mass Flow Controllers page
Visualize your sample and measure thin film thickness and optical constants in seconds.
"With Auto SE, routine work will never be the same!"
NEW NIR Extended Spectral Range !
The ultimate solution to every challenge in thin film measurement