The ADS EVO automates the driver in a chassis vehicle test cell and enables test repeatability.
Improved Efficiency and Installation
The ADS EVO reduces installation time and improves test start-up efficiency.
Light Weight and Easy Installation Compared to the previous model ADS-7000
Easy to Handle Ergonomic design
Simplified Installation ISOFIX* significantly reduces installation time (patent pending)
* ISOFIX is the international standard for securing child safety seats in passenger cars.
Contributes to Vehicle Development Efficiency
The ADS EVO can be used in a wide variety of chassis and vehicle test cells to reduce human error and provides accurate testing results.
The ADS EVO is compatible with environment resistance specifications including high and low temperatures ranging from -40 ~ 80 ℃.
In addition to the standard actuator for engine start, optional versatile actuators are also available. For various vehicle investigations such as air conditioning ON / OFF during the test cycle (patent pending).
Self-contained mechanical unit cart Intuitive design that informs installation procedures (patent pending)
Design is subject to change
Standard drive traces (emissions, etc) ★Performance test mode Auto/Manual adjust (pedal and shift) Learning mode Warm up mode Constant speed mode Manual mode
MT, AT, CVT, ★Hybrid/EV Floor shift, ★Instrument panel shift, ★Column shift For both left and right hand drive vehicles
Measurement function：Dynamometer speed, Engine speed External operation input : Drive start/stop External condition input : Dynamometer ready/error,Blower ON External operation output : Synchronization signal with data processing device ★HOST communication：AK compliant
Accelerator：Stroke length 150 mm, Rated output 160 N, Maximum operating speed 0.61 m/s Brake：Stroke length 200 mm, Rated output 241 N, Maximum operating speed 0.61 m/s Clutch：Stroke length 200 mm, Rated output 322 N, Maximum operating speed 0.78 m/s Shift（X）：Stroke length 190 mm, Rated output 193 N, Maximum operating speed 0.77 m/s Shift（Y）：Stroke length 240 mm, Rated output 193 N, Maximum operating speed 0.77m/s Starter（PUSH）：Rated output 16 N ★Starter（TURN）：Rated output 0.97 N・m ★Up to 5ch push actuators can be added
578(W) × 929(D) × 1000(H) mm
5 - 40℃ 20 - 80%RH(no condensation)
Single phase：AC 200 - 240 V ± 10% (Max 250 V) 50/60 Hz 3.0 kVA or Single phase：AC 100 - 120 V ± 10% 50/60 Hz 3.0 kVA
Teaching pendant：Used for learning shift positions and other various settings Mechanical unit cable：Connect mechanical unit and control rack