EMIA-Step

Carbon/Sulfur Analyzer (Tubular Electric Resistance Heating Furnace Model)

The EMIA-Step Carbon/Sulfur Analyzer, which uses a tubular electric resistance heating furnace, offers highly accurate and sensitive analysis. Its variable heating temperature (up to 1450°C)  function allows for quantitative analysis by separating it by temperature or humidity as well as whole quantity analysis.

* For samples which is difficult to burn (e.g. ceramics, Ti alloys, etc), we also offer the EMIA-Pro (Entry model) and EMIA-Expert (Flagship High-Accuracy Model).

Read latest news: HORIBA Joins Team Analyzing Bennu Asteroid Samples Collected by the NASA OSIRIS-REx Sample Collector

Segment: Scientific
Manufacturing Company: HORIBA, Ltd.

Greater Accuracy

Proven NDIR Gas Detection Technology

The EMIA-Step Carbon/Sulfur Analyzer uses the infrared method to measure Carbon and Sulfur after combustion in an electric resistance furnace. With HORIBA's renowned Non-Dispersive Infrared (NDIR) measurement capabilities, it can detect carbon ranging from 0.0003 to 6.0% (m/m) and sulfur ranging from 0.0004 to 1.0% (m/m). The analyzer is also equipped with a unique CO detector and can be used for a wide range of inorganic materials, including steel, cokes, catalysts, non-ferrous alloys like aluminum, and lithium-ion battery materials.

Please also refer the Measurement Principle page for the details.

 


 

Temperature Control Function

The combustion furnace of the analyzer utilizes a distinctive sealed system, which facilitates efficient combustion of flame-retardant samples through high-pressure oxygenation. The system offers excellent temperature stability, ensuring consistent performance across low and high temperatures. This broadens the range of applications to samples containing substances that are easily decomposed and burned at low temperatures. The decomposition combustion of organic and inorganic matter can be easily observed.



       Temperature rise control from 300 °C to 900 °C

 


 

Improved Measurement and Maintenance Efficiency

New dust-filter provides easy maintenance capability

The EMIA-Step features a dust-filter mechanism that has been proven effective in high frequency induction heating models. The filter unit collects dust generated by high-temperature combustion to prevent it from adhering to the piping after the combustion furnace. This reduces the adsorption of CO2 and SO2 gases by dust and ensures highly accurate and sensitive analyses.



  Schematic of tubular electric resistance heating furnace

 

High Throughput

The EMIA Series can complete one measurement cycle, measurement-display result-cleaning, in 70 seconds (i.e. about 50 samples/hour).

 

Gas Collection Mode

Our exclusive furnace features a closed structure that enables efficient combustion under high-pressure oxygen and allows for the burning of high melting point materials. This unique furnace design allows Gas Collection analysis, in which small amounts of gases are captured within the furnace and then transferred to the detector for analysis.

 


 

More Intuitive Software for Easy Operation

Advanced Operation Software

The EMIA Series features its own proprietary operating software, which has been designed with a focus on ease of use, optimizing layout, operating menus, and functions for enhanced user-friendliness.

Enhanced Operator Assistance

Additionally, the software includes a self-diagnostic monitoring feature to assess the status of connected devices, an alarm function, and three navigators to recommend the most suitable conditions for samples, troubleshoot errors, and alert users to perform maintenance. These features improve daily operation and ensure efficient analysis.

Watch the EMIA Series maintenance video
*The user interface and functionalities of the software for this system are the same with those of EMIA-Pro

 


 

Compliance with ISO/ASTM Standards

Test Methods

Title

Carbon

Sulfur

ISO/TR 15349-1:1998

UNALLOYED STEEL — DETERMINATION OF LOW CARBON CONTENT — PART 1: INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN ELECTRIC RESISTANCE FURNACE (BY PEAK SEPARATION)

 

ISO/TR 15349-3:1998

Unalloyed steel — Determination of low carbon content — Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating)

 

ASTM E 1019-18

Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques

 

ASTM E 1587-17

Standard Test Methods for Chemical Analysis of Refined Nickel

ASTM E 1941-10 (2016)

Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

 

ASTM E 1915-20

Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics

 

ASTM E 1552-16e

Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)

 

ASTM E 4239-18e1

Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

 

ASTM E 5016-16

Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption

 

ASTM E 1619-16a

Standard Test Methods for Carbon Black—Sulfur Content

 

Detection method

NDIR (Non-Dispersive InfraRed) 

Required sample amount

1.00 ± 0.10 g

Minimum reading

0.000001% (m/m) for both Carbon and Sulfur

Carbon

Measurement range

0.0003 〜 6.0% (m/m) 

Accuracy (Repeatability)

σn-1 ≦ 0.00015% (m/m) or RSD ≦ 0.75%

Sulfur

Measurement range

0.0004 〜 1.0%(m/m)

Accuracy (Repeatability)

σn-1  ≦ 0.00020% (m/m) or RSD ≦ 2.00%

Setting temperature range

0 (room temperature) - 1450℃

Dimensions [ W x D x H ]

Combustion unit: 443 × 725 × 710 mm
Measurement unit : 271 × 725 × 710 mm

Mass

Combustion unit: 77 kg,  Measurement unit : 53 kg

Power

200/220/240 V, 5 kVA *Excluding peripheral devices

Carrier gas

Oxygen: Purity 99.5%, Pressure: 0.30〜0.33 MPa

Operation gas

Nitrogen: Purity 99.5%, Pressure: 0.35〜0.38 MPa
*Dry air excluding moisture and oil content can be used as the operation gas
 only for the standard model

Data processing and operation

PC with Windows® 10

User interface

Touch panel/Keyboard/Mouse

* Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or
  other countries. 



Separation and Quantitative Analysis of Carbon and Carbonates in Surface Material of Asteroids
Separation and Quantitative Analysis of Carbon and Carbonates in Surface Material of Asteroids
Carbon, as a constituent of matter, is broadly classified into organic carbon and inorganic carbon. Organic carbon refers to carbon contained in organic materials, while inorganic carbon refers to elemental carbon and carbonate carbon. The presence of carbonate in a sample taken from an unknown planet indicates the possibility of the presence of water on that planet. Therefore, the determination of carbonate is very important in space science.
Quantitative Analysis of Carbon in Polysilicon
Quantitative Analysis of Carbon in Polysilicon
Polysilicon, the raw material for silicon wafers, requires strict control of carbon content, which affects its conductivity. As higher purity silicon wafers are required, it is important to understand the amount of carbon contained in polysilicon supplied as a material. However, some carbon is present as carbonate and some is attached as CO2, making it very difficult to distinguish between them and analyze the extremely small amount of carbon.
Quantitative analysis of carbon contained in bone substitute material
Quantitative analysis of carbon contained in bone substitute material
Can we accurately and quickly measure the amount of carbon contained in the material?
Analysis of Free Carbon in SiC
Analysis of Free Carbon in SiC
Can free carbon in SiC be rapidly and conveniently quantified?
Measurement of Sulfur in Rubber
Measurement of Sulfur in Rubber
Sulfer is added in the natural rubber to produce plastic materials. However, it is important to measure the sulfer contained in the rubber to define the chemical and mechanical properties of the final product.
Measurement of Carbon and Sulfur in Cement
Measurement of Carbon and Sulfur in Cement
This application note describes the method and conditions to use with the EMIA 820V C/S analyzer to measure cement.
Measurement of Carbon in Ferrosilicon
Measurement of Carbon in Ferrosilicon
Ferrosilicon is added as a deoxidant and as an alloying element to steel, that require a special low carbon content. The Low Carbon in Ferrosilicon decreases the electrical conductivity and magnetostriction of electrical steels.
Quality Assurance for the Analysis of Steel by Gas Component Analysis
Quality Assurance for the Analysis of Steel by Gas Component Analysis
Sample Preparation and Sampling Methods for the Gas Analysis of Steel
Sample Preparation and Sampling Methods for the Gas Analysis of Steel
Measurement of Carbon and Sulfur in Copper
Measurement of Carbon and Sulfur in Copper
Copper in reddish metal, it is malleable, ductile and an extremely good conductor of both heat and electricity. Copper metal is widely used for electrical wiring, water piping, and corrosion resistant parts, either pure or in alloy such as brass and bronze. Carbon and Sulfur are considered as impurities, so it is important to measure and check the Copper purity.
Measurement of Carbon and Sulfur in Titanium Oxide
Measurement of Carbon and Sulfur in Titanium Oxide
Titanium oxide are used primarily in the production of paints and plastics and are also used in paper, priniting inks, cosmetics, textiles and food stuffs.
Carbon Analysis: Organic and Inorganic Carbon in Soils
Carbon Analysis: Organic and Inorganic Carbon in Soils
The aim of this application note is to explain the determination of organic and inorganic carbon in soils and how to prepare samples to eliminate inorganic carbon (carbonates) in these soils.

Request for Information

Do you have any questions or requests? Use this form to contact our specialists.

* These fields are mandatory.

Related products

EMGA-921
EMGA-921

Hydrogen Analyzer

EMGA-Expert
EMGA-Expert

Oxygen/Nitrogen/Hydrogen Analyzer
(Flagship High-Accuracy Model)

EMGA-Pro
EMGA-Pro

Oxygen/Nitrogen Analyzer (Entry Model)

EMIA-Expert
EMIA-Expert

Carbon/Sulfur Analyzer
(Flagship High-Accuracy Model)

EMIA-Pro
EMIA-Pro

Carbon/Sulfur Analyzer (Entry Model)

LabRAM Odyssey
LabRAM Odyssey

Confocal Raman & High-Resolution Spectrometer

LabRAM Soleil
LabRAM Soleil

Raman Spectroscope - Automated Imaging Microscope

SLFA-60
SLFA-60

X-ray Fluorescence Sulfur-in-Oil Analyzer

SLFA-6000
SLFA-6000

X-ray Fluorescence Sulfur-in-Oil Analyzer

XploRA™ PLUS
XploRA™ PLUS

MicroRaman Spectrometer - Confocal Raman Microscope

XPLORER-NS*
XPLORER-NS*

Total Nitrogen and Sulfur Analyzer

XPLORER-TX/TS*
XPLORER-TX/TS*

Total Halogen and Sulfur Analyzer

EMIA-Expert
EMIA-Expert

Carbon/Sulfur Analyzer
(Flagship High-Accuracy Model)

EMIA-Pro
EMIA-Pro

Carbon/Sulfur Analyzer (Entry Model)

SLFA-20
SLFA-20

X-ray Fluorescence Sulfur-in-Oil Analyzer

51 series
51 series

Explosion-proof Gas Analyzer

AP-370 Series
AP-370 Series

Air Pollution Monitor

AP-380 Series
AP-380 Series

Air Quality Monitor

APCA-370
APCA-370

Ambient Carbon Dioxide Monitor

APMA-370
APMA-370

Ambient Carbon Monoxide Monitor

CEMS
CEMS

Continuous Emission Monitoring System

EMGA-921
EMGA-921

Hydrogen Analyzer

EMGA-Expert
EMGA-Expert

Oxygen/Nitrogen/Hydrogen Analyzer
(Flagship High-Accuracy Model)

EMGA-Pro
EMGA-Pro

Oxygen/Nitrogen Analyzer (Entry Model)

EMIA-Expert
EMIA-Expert

Carbon/Sulfur Analyzer
(Flagship High-Accuracy Model)

EMIA-Pro
EMIA-Pro

Carbon/Sulfur Analyzer (Entry Model)

ENDA-5000 series
ENDA-5000 series

Stack Gas Analysis System

ENDA-7000 Series
ENDA-7000 Series

Stack Gas Analyzer

GA-370
GA-370

Trace Gas Monitor

GI-700 series
GI-700 series

Stack Gas Analyzer

IR-300
IR-300

Vapor Concentration Monitor

IR-400
IR-400

High-grade type Gas Monitor for Chamber Cleaning End Point Monitoring

LO-300
LO-300

Laser scanning oil film detector

MEXA-1300R
MEXA-1300R

Motor Exhaust Gas Analyzer

MEXA-584L
MEXA-584L

Automotive Emission Analyzer

MEXA-ONE
MEXA-ONE

Motor Exhaust Gas Analyzer

OBS-ONE GS Unit
OBS-ONE GS Unit

On-board Emissions Measurement System

OBS-ONE-XL (IRLAM)
OBS-ONE-XL (IRLAM)

On-board NH3/N2O Measurement System for real-world driving

OCMA-500
OCMA-500

Oil concentration meter

OCMA-550
OCMA-550

Oil concentration meter

PG-300 series
PG-300 series

Portable Gas Analyzer

TCA-5000
TCA-5000

Hydrogen Gas Analyzer

TX-100
TX-100

Tunable Laser Gas Analyzer

VA-5000 / VA-5000WM Series
VA-5000 / VA-5000WM Series

Multi-Component Gas Analyzer

Corporate