Particle Characterization
LA-910
LA-910
Lightweight, High-opacity Paper by Fiber Loading: Filler Comparison |
Hydrothermal Synthesis and Structural Characterization of BaTiO3 nanocrystals |
PET Polyester Resins Used in the Wet End at Neutral-Ackaline Papermaking Conditions |
Aqueous Cleaner Filtration Study |
Novel Lightweight, High-Opacity Papers Made from Mechanical Pulps |
Photodegradation of carboxylic acids on Pr6O11 surface. Enhancement by semiconductors |
Preparation of porous lanthanum phosphate with templates |
Wear mechanism in automotive brake materials, wear debris and its potential environmental impact |
Comparative analysis of a DI diesel engine fuelled with biodiesel blends during the European MVEG-A cycle: Preliminary study (I) |
Influence of Molecular Character of Chitosan on the Adsorption of Chitosan to Oil Droplet Interfaces in an In Vitro Digestion Model |
Comparison of receptor models for source apportionment of the PM10 in Zaragoza (Spain) |
Particle separation efficiency in two 10-mm hydrocyclones in series |
Effects of silver oxalate additions on the physical characteristics of low-temperature-curing MOD silver paste for thick-film applications |
Enhancement of oral bioavailability of an HIV-attachment inhibitor by nanosizing and amorphous formulation approaches |
Mineral induced mechanochemical degradation: The imazaquin case |
Cation distribution in the Bi4 − xRExTi3O12 (RE = La, Nd) solid solution and Curie temperature dependence |
Degradation of carboxylic acids on Y2O3 surface under UV light. Synergism by semiconductors |
Photo degradation of phenol on Y2O3 surface: Synergism by semiconductors |
Phenol degradation on Pr6O11 surface under UV-A light. Synergistic photocatalysis by semiconductors |
Rhodamine-conjugated acrylamide polymers exhibiting selective fluorescence enhancement at specific temperature ranges |
Synthesis and characterization of LaNiO3-based platinum catalyst for methanol oxidation |
New experimental constraints on the composition and structure of tholins |
Semiconductor-catalyzed degradation of phenols with sunlight |
Mechanism of centrifugal filtration for separation of microbe/protein bio-suspension |
Effects of milling condition on the formation of core?shell structure in BaTiO3 grains |
Diagnosis of trace metal contamination in sediments: The example of Ensenada and ElSauzal, two harbors in Baja California, Mexico |
Rice husk ash blended cement: Assessment of optimal level of replacement for strength and permeability properties of concrete |
Characteristics of polymers enabling nano-comminution of water-insoluble drugs |
Photocatalytic performance of particulate semiconductors under natural sunshine - Oxidation of carboxylic acids |
Photo oxidation of iodide ion on immobilized semiconductor powders |
Understanding a relaxation behavior in a nanoparticle suspension for drug delivery applications |
Detonation synthesized nanodiamond powder for the preparation of porous polycrystalline micron powders |
Development of IT-SOFC unit cells with anode-supported thin electrolytes via tape casting and co-firing |
Preparation and acidic properties of nano-porous lanthanum phosphate by the addition of urea |
TULA proteins bind to ABCE-1, a host factor of HIV-1 assembly, and inhibit HIV-1 biogenesis in a UBA-dependent fashion |
Humidity sensing and electrical properties of Na- and K-montmorillonite |
Synthesis and characterization of iron aluminide nanoparticles by DC thermal plasma jet |
Disruption and sedimentation of casein micelles and casein micelle isolates under high-pressure homogenization |
Electrical and optical properties of Jäger-nickel (II)-based molecular-material thin films prepared by the vacuum thermal evaporation technique |
Evaluation of bagasse ash as supplementary cementitious material |
Frequency and sources of basin floor turbidites in alfonso basin, Gulf of California, Mexico: Products of slope failures |
Improvement of acid and base resistance of nickel phosphate pigment by the addition of lanthanum cation |
Semiconductor-catalyzed solar photooxidation of iodide ion |
Synthesis, characterization and photocatalytic property of nanostructured Al-doped ZnO powders prepared by spray pyrolysis |
Mesoporous carbide-derived carbon with porosity tuned for efficient adsorption of cytokines |
The purification of protein in cross-flow microfiltration of microbe/protein mixtures |
Performance of intermediate temperature (600/800 °C) solid oxide fuel cell based on Sr and Mg doped lanthanum-gallate electrolyte |
Biocidal effects of photocatalytic semiconductor TiO2 |
Influence of partial substitution of Cu for Co on the thermoelectric properties of NaCo2O4 |
Facile fabrication of poly(p-phenylene ethynylene)/colloidal silica composite for nucleic acid detection |
Mechanochemical reforming of nickel pyrophosphate |
Effect of embedded metal compound on porosity of silica colloids prepared by spray reaction of silicon tetrachloride |
Critical freezing rate in freeze drying nanocrystal dispersions |
Additional effects of rare earth elements on formation and properties of some transition metal pyrophosphates |
Enzyme-based additives for paints and coatings |
The preparation and filtration characteristics of Dextran - MnO2 gel particles |
Phase transition in barium titanate nanocrystals by chemical treatment |
Surfactant-stabilized contrast agent on the nanoscale for diagnostic ultra sound imaging |
Sintering behaviors of bismuth titanate synthesized by a coprecipitation method |
Experimental design and results from the preparation of precursory powders of ZrO2(3%Y2O3)/(10?95)% Al2O3 composite |
Emissions of fine particles, NOx, and CO from on-road vehicles in Finland |
A phenomenological description of the rate of the aluminum/oxygen reaction in the reaction-bonding of alumina |
Role of polymeric stabilizers for drug nanocrystal dispersions |
Azlactone-reactive polymer supports for immobilizing synthetically useful enzymes. II. Important preliminary hydrogen bonding effects in the covalent coupling of Penicillin GAcylase |
Inhibition of photooxidation of iron(II) by some semiconductors |
Addition of rare earth cation on formation and properties of various cobalt phosphates |
Particle velocity and particle clustering in down-flow reactors |
The role of biopharmaceutics in the development of a clinical nanoparticle formulation of MK-0869: a Beagle dog model predicts improved bioavailability and diminished food effect on absorption in human |
Effect of shell type on the in vivo backscatter from polymer-encapsulated microbubbles |
Photoluminescent properties of Y2O3:Eu3+ phosphors prepared via urea precipitation in non-aqueous solution |
Effects of modified corn gluten meal on quality characteristics of a model emulsified meat product |
Development and characterization of a nano-scale contrast agent |
Influence of surface-active agents on pore characteristics of the generated spherical resorcinol-formaldehyde based carbon aerogels |
Size control and characterization of spherical carbon aerogel particles from resorcinol-formaldehyde resin |
Database for the Microstructure of Plated Films |
Mechanochemical effects on synthesis and properties of manganese-neodymium diphosphates |
Critical zeta potential and the Hamaker constant of oxides in water |
The sustained granulopoietic effect of progenipoietin encapsulated in multivesicular liposomes |
Analysis of silica fume produced by zircon desilication |
Growth of In2O3(ZnO)5 platelet micro-crystals by flux methods |
Modulation of the sustained delivery of myelopoietin (Leridistim) encapsulated in multivesicular liposomes (DepoFoam) |
Silica removal performance of seed from geothermal fluids |
Nanosizing: a formulation approach for poorly-water-soluble compounds |
Direct and indirect induction of apoptosis in human mesenchymal stem cells in response to titanium particles |
Zinc-rich powder coatings corrosion in sea water: influence of conductive pigments |
Characterization of zinc-rich powder coatings by EIS and Raman spectroscopy |
Characterization of the structures of poly(urea?urethane) microcapsules |
The transformation of LiAlO2 crystal structure in molten Li/K carbonate |
Preparation and characterization of LiNi0.7Co0.2Ti0.05M0.05O2 (M=Mg, Al and Zn) systems as cathode materials for lithium batteries |
Clay dispersal and the geochemistry of manganese in the Northern Gulf of California |
Energetics of anhydrite, barite, celestine, and anglesite: a high-temperature and differential scanning calorimetry study |
Sustained-delivery of an apolipoproteinE?peptidomimetic using multivesicular liposomes lowers serum cholesterol levels |
Preparation of hydrogen storage alloys for applications of hydrogen storage and transportation |
Temperature, cycling, discharge current and self-discharge electrochemical studies to evaluate the performance of a pellet metal-hydride electrode |
Application of electrodes modified with ion-exchange polymers for the amperometric detection of non-redox cations and anions in combination to ion chromatography |
DepoFoam technology: a vehicle for controlled delivery of protein and peptide drugs |
Influence of process control agent on interdiffusion between Al and Mg during mechanical alloying |
Interdependence between green compact property and powder agglomeration and their relation to the sintering behaviour of zirconia powder |
Prediction of the amount of PCA for mechanical milling |
Improving the magnetic properties of hydrothermally synthesized barium ferrite |
Lipopeptide particles as the immunologically active component of CTL inducing vaccines |
Fabricating densified hydroxyapatite ceramics from a precipitated precursor |
Synthesis and characterization of ultrafine lead zirconate powders |
Shear yield stress of flocculated alumina?zirconia mixed suspensions: effect of solid loading, composition and particle size distribution |
Synthesis of lead zirconate powders via a polyaniline-mediated microemulsion processing route |
Low temperature synthesis of PZT powders via microemulsion processing |
Highly sensitive discrimination of taste of milk with homogenization treatment using a taste sensor |
The use of a circulating fluidized bed absorber for the control of sulfur dioxide emissions by calcium oxide sorbent via in situ hydration |
Single crystals for radiation detectors |
The dissolution of scorodite in gypsum-saturated waters: Evidence of Ca-Fe-AsO4 mineral formation and its impact on arsenic retention |
The incongruent dissolution of scorodite ? Solubility, kinetics and mechanism |
Microstructure and electrochemical performance of LiNi0.6Co0.4−xMnxO2 cathode materials |
LA-910 & LA-920
Effect of surface-active stabilizers on the surface properties of coconut milk emulsions |
Improvement of gas-cyclone performance by use of local fluid flow control method |
Structure and electromagnetic characteristics of flaky FeSiAl powders made by melt-quenching |
Effect of dispersing and stabilizing additives on rheological characteristics of the upgraded brown coal water mixture |
Gypsum crystallization and hydrochloric acid regeneration by reaction of calcium chloride solution with sulfuric acid |
Powder metallurgy magnesium composite with magnesium silicide in using rice husk silica particles |
Oxide coatings on Y3Al5O12:Tb3+ particles |
Effect of surface-active stabilizers on the microstructure and stability of coconut milk emulsions |
Effect of type of peroxide on cross-linking of poly(l-lactide) |
Liquid-liquid extraction for efficient synthesis and separation by utilizing micro spaces |
Effect of multi-inlet flow on particle classification performance of hydro-cyclones |
Carbon nanotubes synergistically enhance photocatalytic activity of TiO2 |
All solid battery with phosphate compounds made through sintering process |
Hybridized synergy effect among TiO2, Pt and graphite silica on photocatalytic hydrogen production from water-methanol solution |
Gas transfer kinetics and redox potential considerations in oxidative precipitation of manganese from an industrial zinc sulphate solution with SO2/O2 |
Fabrication of polymer electrolyte membrane fuel cell MEAs utilizing inkjet print technology |
Factors governing survival of black willow (Salix nigra) cuttings in a streambank restoration project |
Distribution patterns of octylphenol and nonylphenol in the aquatic system at Mai Po Marshes Nature Reserve, a subtropical estuarine wetland in Hong Kong |
Oligomethylene spacer length dependent interaction of synthetic galactolipids incorporated in phospholipid layers with ricin |
Influence of mass transfer resistance on overall nitrate removal rate in upflow sludge bed reactors |
Mechanism of oil-in-water emulsification using a water-soluble amphiphilic polymer and lipophilic surfactant |
Particle separation performance by use of electrical hydro-cyclone |
Properties of low power spark ablation in aqueous solution for dissolution of precious metals and alloys |
Macroporous ZrO2 ceramics prepared from colloidally stable nanoparticles building blocks and organic templates |
LiVOPO4 as a new cathode materials for Li-ion rechargeable battery |
Influence of metal oxides on PCDD/Fs formation from pentachlorophenol |
Zeolite-carbon composites prepared from industrial wastes: (I) Effects of processing parameters |
Preparation of CuIn(S,Se)2 by mechanochemical process |
Effect of thermal treatments on the properties of coconut milk emulsions prepared with surface-active stabilizers |
Preparation and characterization of porous biodegradable microspheres used for controlled protein delivery |
Pre-evaluation method for the spectroscopic properties of YAG bulk materials by so-gel synthetic YAG powder |
Continuous fine particle classification by water elutriator with applied electro-potential |
Synthesis of calcium phosphate hydrogel from waste incineration fly ash and its application to fuel cell |
Fabrication of 80 mm diameter-sized solid oxide fuel cells using a water-based NiO-YSZ slurry |
Nanocrystalline eutectic Al-Si alloy produced by cryomilling |
Effects of addition of food by-products on the fermentation quality of a total mixed ration with whole crop rice and its digestibility, preference, and rumen fermentation in sheep |
Synthesis of calcium phosphate hydrogel from waste incineration fly ash and bone powder |
Friction and wear behavior of sintered magnesium composite reinforced with CNT-Mg2Si/MgO |
Size distributions of manure particles released under simulated rainfall |
Synthesis and characterisation of nano-composite copper oxalate powders by a surfactant-free stripping-precipitation process |
Crystal alignment of graphite as a negative electrode material of the lithium-ion secondary batteries |
Influence of arsenate species on the formation of Fe(III) oxyhydroxides and Fe(II-III) hydroxychloride |
Characteristics of polyimide/barium titanate composite films |
Highly Crosslinked Vs Conventional Polyethylene Particles: Relative In Vivo Inflammatory Response |
Cuttleboneas reinforcing filler for natural rubber |
Radiation-induced grafting of styrene onto ultra-high molecular weight polyethylene powder and subsequent film fabrication for application as polymer electrolyte membranes:I. Influence of grafting conditions |
Container effects on the physicochemical properties of parenteral lipid emulsions |
Effect of pH of fine silica suspension and central rod diameter on the cut size of an electrical hydrocyclone with and without underflow |
Chemical mechanical planarization of copper using transition alumina nanoparticles |
Precursor effects on ZrW2O8 formation kinetics |
Physicochemical stability of phospholipid-dispersed suspensions of crystalline itraconazole |
Effect of multi-inlet flow on particle classification performance of hydro-cyclones |
Impacts of post-glacial lake drainage events and revised chronology of the Champlain Sea episode 13-9 ka |
Influence of carbon content and particle dispersion on radiation properties of coalchars |
Photocatalytic hydrogen production enhanced by laser ablation in water-methanol mixture containing titanium(IV) oxide and graphite silica |
Synthesis of BaTiO3 powders by a ball milling-assisted hydrothermal reaction |
Preparation of ceria with large particle size and high appearance density |
Mutation of the maize sbe1a and ae genes alters morphology and physical behavior of wx-type endosperm starch granules |
The effect of nutrient addition on metal tolerance in Salvinia herzogii |
Physicochemical stability of lipid injectable emulsions: Correlating changes in large globule distributions with phase separation behavior |
Optimization of silica-based media for antibody purification by protein A affinity chromatography |
The incongruent dissolution of scorodite ? Solubility, kinetics and mechanism |
Synthesis and evaluation of Zr0.5Ti0.5B2 solid solution |
Role of phosphate species during the formation and transformation of the Fe(II-III) hydroxycarbonate green rust |
Orbital-and millennial-scale variations in Asian dust transport path to the Japan Sea |
The effect of biomass characteristics on the partitioning and sorption hysteresis of 17α-ethinylestradiol |
Self-propagating high-temperature synthesis of La(Sr)Ga(Mg)O3−δ for electrolyte of solid oxide fuel cells |
The orientation mechanism of (Ca,Sr)Bi4Ti4O15 ceramics prepared by slip casting in high magnetic field and subsequent sintering |
Sulfidation treatment of copper-containing plating sludge towards copper resource recovery |
Analysis of effluent gases during the CCVD growth of multi-wall carbon nanotubes from acetylene |
Single enzyme nanoparticles in nanoporous silica: A hierarchical approach to enzyme stabilization and immobilization |
Effect of aqueous composition on the freeze-thaw stability of emulsions |
Recovery of bitumen from oilsands: gelation of ultra-fine clay in the primary separation vessel |
Thickening properties and emulsification mechanisms of new derivatives of polysaccharides in aqueous solution |
LA-910 & LA-950
The Thermal Decomposition of Carbohydrates. Part II. The Decomposition of Starch |
Sustained release subcutaneous delivery of BMS-686117, a GLP-1 receptor peptide agonist, via a zinc adduct |
Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore-based materials - the influence of bismuth |
Particulate matter < 10 μm (PM10) and total suspended particulates (TSP) in urban, rural and alpine air in Switzerland |
Crystallization of Nb3Sn from solution in a niobium tube |
LA-910, LA-920 & LA-930
A multi-proxy study of Argentina loess: Marine oxygen isotope stage 4 and 5 environmental record from pedogenic hematite |
A 1500-year record of temperature and glacial response inferred from varved Iceberg Lake, south central Alaska |
LA-910, LA-920 & LA-950
Microbial activity in a combined UASB - activated sludge reactor system |
Catalytic treating of gas pollutants over cobalt catalyst supported on porous carbons derived from rice husk and carbon nanotube |
Anion effects on electrostatic charging of sterically stabilized, water insoluble drug particles |
Late Quaternary hydroclimatology of a hyper-arid Andean watershed: Climate change, floods, and hydrologic responses to the El Niño-Southern Oscillation in the Atacama Desert |
Influencing effect of intra-granule mass transfer in expanded granular sludge-bed reactors treating an inhibitory substrate |
Deducing source rock lithology from detrital rutile geochemistry: An example from the Erzgebirge, Germany |
Abiotic formation of hydrocarbons under hydrothermal conditions: Constraints from chemical and isotope data |
Millennial-scale changes in terrestrial sediment input and Holocene surface hydrography in the northern South China Sea (IMAGES MD972146) |
Firesides lagging, fouling, and high-temperature corrosion of heat-transfer surface due to impurities in steam-raising fuels |
LA-910, LA-930 & LA-950
Tests of cesium iodide crystals for an electromagnetic calorimeter |
Microstructure and electrochemical performance of LiNi0.6Co0.4−xMnxO2 cathode materials |
Member login
Forgot Password?
Having trouble login in? Please click here and we will send a new password. If you are still having trouble, contact us at web_member@horiba.com.
Not a member yet?
Register and receive access to advanced information, including Application Data Sheets, Application Notes, Brochures, Links to External Articles, Manuals, Software Downloads, Software Updates. When you register you will also receive periodic updates by e-mail. Create a new account.