Application
PTFM-1000
概要
The Pitot Tube Flow Meter
The PTFM-1000 is used for the direct measurement of engine exhaust gas flow rate on engine and chassis dynamometer test systems.
The PTFM provides the exhaust flow rate without requiring a CVS for CO2 tracer or modification to the engine for air and fuel flow measurement. Meets the accuracy requirements of ISO 16183*.
* (+/- 1.5% of max fl ow or +/- 2.5% of reading, whichever is largest)
特長
BENEFITS:
- Eight sizes of flow tubes available for flow rates from 2 - 65 m³ / min
- Calibration Coefficients and Tube type stored locally on the tube to allow the interface to detect the correct tube and upload the correct Coefficients
- Exhaust Pressure Sensor (+/- 10 kPa gauge)
- Exhaust pipe connections/seals for high temperature operation (550 ºC)
- Quick Coupling for easy connection to the exhaust pipe
- Multiple data outputs (analogue, RS-232 or LAN) 10 Hz
- Three additional, user configurable data channels such as exhaust pressure, temperature
- Optional Remote Display module (max cable length 10m)
製造会社: HORIBA
仕様
Function: | Engine Exhaust gas flow rate measurement |
Accuracy: | ± 2.5 % of reading or ± 1.5% of full scale |
Outputs: | Analogue (0 - 10V, user configurable scaling), RS-232 and LAN |
Materials in Gas Contact: | 304 stainless steel, copper gaskets, PTFE (low temperature), Thermiculite (High temperature) |
Purge Air Gas: | Compressed Air, 10 bar maximum (regulator not included) |
Power (Interface unit): | 230VAC, 50 Hz : 600 W or 115VAC, 50/60 Hz : 600 W |
Dimensions (Interface): | 219 mm (H) : 370 mm (W) : 330 mm (D) - Dimensions exclude fittings |
Weight: | 14 Kg |
Options
Flow Tubes: | Type |
Tube Connections: | Tube connections can be adapted to suit engine exhaust pipes. |
Exhaust Pressure: | ± 10 kPa gauge. |
Remote Display: | For local display of flow rate, flow tube type and local control of Standby, Zero, Purge and Measure modes. |