HE-960CW

面板安裝型雙通道電導率儀（電導率計）

蒸氣滅菌期間藥物水管理和溫度監測的理想選擇。

從純水到2000μs/cm的水質管理的理想電導率計。水質確定功能專為製藥業設計，符合USP <645>（美國藥房），使其非常適合管理藥水（例如注入水）（WFI）。提供符合各國的藥典（USP，EP）的藥物製造流程的感測器陣容，以及適合樣品特性的感測器。使用面板安裝變送器可以降低安裝成本。

COND

產品分類: Process Water
製造商: HORIBA Advanced Techno Co., Ltd. Finesse Solutions, LLC

Diverse lineup of sensors available

We offer general-purpose sensors suitable for pure water and boiler water control and wastewater treatment monitoring, as well as sensors for pharmaceutical manufacturing processes that comply with the pharmacopoeias of various countries (USP, EP, JP). Materials that can accommodate specialized water requirements are also offered.

Possible to be used in a panel-mounted configuration

This transmitter is easy to install while providing standard functions.

2-channel specification

Allowing measurement at 2 points, and capable of displaying salt removal rate.

Product name Industrial 2-channel conductivity meter
Model HE-960CW
Measurement
method		 Electrode type (2-electrode method)
Sensor input 2 channels (for concurrent measurement with sensors isolated each other)
Cell constant 0.01/cm, 0.1/cm, or 1.0/cm
Temperature
sensor
specifications		 Platinum resistance 1000 Ω/0℃
Measuring range Cell constant (/cm) 0.01
(ESD/ESL/ESH-001)		 0.1
(ESD/ESL/ESH/FS-01)		 1.0
(ESD/ESL/ESH-1)
Conductivity
range		 (μS/cm) 2.000/20.00 2.000/20.00/200.0/2000* 200.0/2000
(mS/m) 0.2000/2.000 0.2000/2.000/20.00/200.0* 20.00/200.0
TDS
conversion		 (mg/L) 2.000/20.00 2.000/20.00/200.0/2000* 200.0/2000
*: Applicable for only sanitary sensor (FS-01 series)
Temperature 0℃ to 100℃
Desalination rate 0.0% to 100.0%
Conductivity
difference		 Depends on measurement range of sensor 2 (CH2).
Repeatability Conductivity display Within ±0.5% of the full scale (in equivalent input)
2000 μS/cm and 200.0 mS/m ranges of FS-01: Within ±2% of the full scale
TDS conversion
display		 Within ±1.5% of the full scale (in equivalent input)
Linearity Conductivity display Within ±0.5% of the full scale (in equivalent input)
2000 μS/cm and 200.0 mS/m ranges of FS-01: Within ±2% of the full scale
TDS conversion
display		 Within ±1.5% of the full scale (in equivalent input)
Display/output
range		 Conductivity Measurement range
Temperature −30℃ to 160℃
Desalination rate 0% to 100%
Conductivity
difference		 Measurement range of sensor 2 (CH2)
Transmission
output		 Number of outputs: 4
4 mA to 20 mA DC/0 mA to 20 mA DC, input/output isolated type
Maximum load resistance: 900 Ω
Transmission output range: Freely selectable within the measurement range(Negative terminals of each transmission output channel are connected inside and thus have the same electric potential.)
Contact output
  • Number of outputs: 4
  • Alarm contact outputs (R1, R2, and R3)
      Contact type: relay contact, SPST (1a)
      Contact rating: 240 V AC, 3 A and 30 V DC, 3 A (resistance load)
      Contact function: selectable from the upper/lower limit action (ON/OFF control), delay, and hysteresis.
      Output contents: selectable from the selected measurement, USP assessment,anomaly alarm and maintenance.
  • Alarm contact output (R4)
      Contact type: relay contact, SPDT (1c)
      Contact rating: 240 V AC, 3 A and 30 V DC, 3 A (resistance load)
      Contact function: selectable from the upper/lower limit action (ON/OFF control), delay, and hysteresis.
      Output contents: selectable from the selected measurement, USP assessment,anomaly alarm and maintenance.
      (However, R1 and R2, and R3 and R4 share the common contacts respectively.)
  • Contact operation (operation between C and NO for R1 to R4)
      When selected measurement, USP assessment, or maintenance is selected in output contents:
      Contact point becomes “CLOSE” at control operation and “OPEN” at normal state (including power shutdown).
      When anomaly alarm is selected in output contents:
    Contact point becomes “CLOSE” at normal state and “OPEN” at anomaly state (including power shutdown).
      (When between C and NC is used with R4, contact point becomes reverses state with that of between C and NO.)
Communication
output		 RS-485 input/output
Calibration
function		 Conductivity: Based on the specified compensation coefficient for cell constant (parameter input).
Temperature: Calibrated by comparing with the reference thermometer.
TDS: Conversion using a user-defined coefficient value (0.30 to 1.00).
Transmission
output hold
feature
  • Previous value hold
  • Optional value hold
    Selectable from the above
    (However, only the previous value hold is available in the maintenance mode.)
Self-diagnosis
function
  • Sensor diagnosis
    Short-circuit and disconnection of the temperature sensor
  • Out of the measurement range
  • Converter error
Temperature
compensation
  • Temperature characteristic of NaCl (reference temperature: 5℃ to 95℃)
  • Arbitrary temperature coefficient entry.
    (reference temperature: 5℃ to 95℃: temperature coefficient: ±5%/℃)
    (In the deionized water area, however, the temperature compensation for deionized water is automatically performed in both NaCl and arbitrary temperature coefficient compensation settings.)
  • No temperature compensation
Temperaturecompensated
range		 0℃ to 100℃
Ambient
temperature		 −5℃ to 55℃
Relative humidity 20% to 85% (without dew condensation)
Storage
temperature		 −25℃ to 65℃
Power supply Rated voltage 100 V to 240 V AC, 50 Hz/60 Hz, 25 VA (maximum)
Structure Indoor-use panel installation type
Panel case: ABS, Terminal: PBT
Panel: IP65 dust and water proof structure
Protective
structure		 Panel: IP65 (IEC60529, JIS C0920)
Rear case: IP20, Terminal:IP00
Class II device (IEC61010-1)
Pollution level 2 (IEC61010-1)
Conforming
standards		 CE Marking EMC Directive: EN61326-1
Low Voltage Directive: EN61010-1
RoHS Directive: EN50581
FCC Rule FCC Part15
External
dimensions		 96 (W) mm × 96 (H) mm × 115 (D) mm
Case depth: approx. 105 mm (when panel-mounted)
Mass Approx. 550 g
Compatible
sensors		 Sensor type Model Cell constant (/cm) Temperature
coefficient of
temperature
sensor (ppm/℃)
Insert type ESD/ESL series 0.01, 0.1, 1.0 3750
ESH series 0.01, 0.1, 1.0 3850
Sanitary insert type ESD-01C-SN1.5 0.1 3750
ESH-01C-SN1.5 0.1 3850
Sanitary flow-through
type		 FS-01C-SL series 0.1 3750
FS-01FC-SL series 0.1 3850
尺寸 3.97 MB
〈Catalog〉Panel mount type water quality measuring instruments 48/96 Series

留言諮詢

如您有任何疑問，请在此留下詳細需求或問題，我們將竭誠您服務。

* 這些欄位為必填項目。