MEXA-730λ

MEXA-730λ - Air-to-fuel Ratio Analyzer
MEXA-730λ - Air Ratio and Oxygen Concentration
MEXA-730λ - Air-to-Fuel Evaluation

Air-to-fuel Ratio Analyzer

Original front panel providing enhanced visibility and operation Restorable sensor coefficient data with new memory back-up function.

Previously MEXA-700λII used know-how and ingenuity gathered from HORIBA air-to-fuel ratio measurement technologies used worldwide, to provide the highest level of performance.
The MEXA-730λ adopts this performance and adds original design for enhanced visibility and operation.
A new sensor coefficient data memory function makes it possible to restore back-up data, providing faster start-up times and saving valuable operation time.

This enhanced device will meet your multiple testing requirements covering applications from, lab analysis of air-to-fuel ratio, excess air ratio and oxygen concentration, to on-board real time measurement.

Segment: Automotive
Produktionsfirma: HORIBA, Ltd.

Typical display screens

Easy-to-see display with improved black background

Applications

  • Engine research and development
  • Engine tuning
  • Catalyst development
  • Exhaust gas adjustment
  • On-board evaluation
  • ECU adjustment

Meets your need to measure air-to-fuel ratio under various applications

Provides stability with air-to-fuel analyzing sensor
To meet the stringent measurement conditions of research and development, the on-board auto sensor is produced specifically for air-to-fuel evaluation.  Each unit undergoes thorough inspection to guarantee accuracy. As a standard unit for air-to-fuel ratio measurement, the MEXA-730λ provides reliable accurate performance.
Sensors of MEXA-700λ/700λII can be used with MEXA-730λ.

Wide measurement range applicable to lean-burn engine development
The MEXA-730λ can handle various applications with its wide measurement range. Use it in the front line of development for sure evaluation of any type of engine you are working on, including lean-burn.

Versatility inherited from MEXA-700λ
The MEXA-730λ can be mounted on vehicle dashboards, table-tops, or in a 19-inch rack cabinet. It is easily transported from location to location providing the versatile characteristics required for your testing requirements.

Can be stacked for multi-channel measurement
Multi-channel measurements are easily accommodated by using several MEXA-730λ units simultaneously, for example, to monitor air-to-fuel ratio in each cylinder.  The stable and compact design of the MEXA-730λ permits the instruments to be safely stacked for maximum convenience.

Small DC drive allows on-board mounting for convenient operation from the dashboard or complementary locations.

Option

Calibration unit (Bubbler)

Control unit

Model nameMEXA-730λ
Display rangeA/F : 3.99 to 500.0
λ : 0.275 to 30.00
O2 : 0.00 to 99.99 vol%
Accuracy of A/F(Guarantee range is from 9.5 to 200 A/F)
(Model gas at room temperature, atmospheric pressure is used):
With 3-point calibration at 9.5 A/F, stoichiometric point and 60.0 A/F
9.50 A/F to stoichiometric point: within ±0.3 A/F
at stoichiometric point: within ±0.1 A/F
stoichiometric point to 20.00 A/F: within ±0.3 A/F
20.01 to 30.00 A/F: within ±0.7 A/F
30.01 to 40.00 A/F: within ±1.0 A/F
40.01 to 50.00 A/F: within ±1.5 A/F
50.01 to 60.00 A/F: within ±2.0 A/F
60.01 to 80.00 A/F: within ±6.0 A/F
80.01 to 100.0 A/F: within ±9.0 A/F
100.1 to 150.0 A/F: within ±20.0 A/F
150.1 to 200.0 A/F: within ±38.0 A/F
Response timeTypical 80 ms (Max.150 ms)
Digital input-outputRS-232C (standard)
Analog output0 to 5 V DC (scaling possible)
H/C setting range0.00 to 9.99 (key selectable)
O/C setting range0.000 to 6.811 (key selectable)
Calibration gasAmbient air or standard gas
Acceptable vibration0 to 294 m/s2
Power10-30 V DC, 50 W
Dimensions130 (W) × 170 (D) × 75 (H) mm
MassApprox. 1.1 kg (Control unit)

UEGO Sensor (Data sheet supplied with each UEGO sensor)

Sample gas temperature-7 °C to 900 °C
Heater temperature controlPID
Hexagonal nut size22 mm
Torque40±4N・m

Standard accessories

UEGO sensor (1), Sensor cable 10 m (1), DC power cable (1), Analog output cable (1)

Options

AC unit PSU-700, Two-channel rack kit (incl. AC power adapter), Sensor cable (5 m, 20 m), Calibration unit, Nut for attaching sensor, Closing-up bolt, RS-232C cable

Schematics

Informationsanfrage

Sie haben Fragen oder Wünsche? Nutzen Sie dieses Formular, um mit unseren Spezialisten in Kontakt zu treten.

* Diese Felder sind Pflichtfelder.

Related products

CVS-ONE
CVS-ONE

Constant Volume Sampler

EXFM-ONE
EXFM-ONE

Ultrasonic Exhaust Flow Meter

FTX-ONE-CL
FTX-ONE-CL

FTIR Exhaust Gas Analyzer Dilute Measurement Type

FTX-ONE-CS/RS
FTX-ONE-CS/RS

FTIR Exhaust Gas Analyzer Direct Measurement Type

MDLT-ONE
MDLT-ONE

Micro Dilution Tunnel

MEXA-1170HCLD
MEXA-1170HCLD

Heated Type NOx Analyzer

MEXA-1170HFID
MEXA-1170HFID

Heated Type THC Analyzer

MEXA-1170SX
MEXA-1170SX

Motor Exhaust Gas Sulfur Analyzer

MEXA-1300R
MEXA-1300R

Motor Exhaust Gas Analyzer

MEXA-2000SPCS series
MEXA-2000SPCS series

Solid Particle Counting System

MEXA-584L
MEXA-584L

Automotive Emission Analyzer

MEXA-ONE
MEXA-ONE

Motor Exhaust Gas Analyzer

MEXA-ONE-FT
MEXA-ONE-FT

FTIR Motor Exhaust Gas Analyzer

MEXA-ONE-QL-NX
MEXA-ONE-QL-NX

Laser Spectroscopic Motor Exhaust Gas Analyzer

PTFM-1000V2
PTFM-1000V2

Pitot Tube Exhaust Flow Meter

PTFM-ONE-DT
PTFM-ONE-DT

Dual Pitot Tube Exhaust Flow Meter

Torque Matching
Torque Matching

Road-to-Rig Chassis Dyno Replication