
FES-220 Sanitary Conductivity Sensor (Ferrule Clamp type)
Vue d'ensemble
The FES-220 Series sanitary conductivity sensors are electric sensors that target sanitation issues by employing a flat structure that keeps dirt from adhering to the tip of the sensor, and they enable continuous, high accuracy measurement in liquids of various concentrations, from purified water to cleaning solutions.
The FES-220 Series, which is used in conjunction with the conductivity converter HE-960HS, demonstrates the optimum high sanitary characteristics that are ideal for the concentration and CIP management employed at food (beverage) and cosmetics plants.
Fonctions
- Flat structure keeps dirt from adhering
- Wide measurement range of 0 to 500 S/m
- Line-up of 2 sensor sizes: 1.5 S, 2 S
- SUS316L, PTFE, and FKM are used as materials for contact with fluids
Fabriqué par HORIBA Advanced Techno
Caractéristiques
Model | Lead | FES-220-L-S-SN-1.5S | FES-220-L-S-SN-2.0S |
---|---|---|---|
Connector | FES-220-C-S-SN-1.5S | FES-220-C-S-SN-2.0S | |
Measurement principle | Alternative four-pole method | ||
Cell constant | Approx. 0.1 /cm | ||
Measurement range | 0 to 500 mS/cm (complies with the specifications of the conductivity converter) | ||
Temperature range under normal use | 0~110℃ | ||
Pressure range | 0~1MPa | ||
Ambient operating temperature / humidity | 0 to 50°C, 95% RH or lower | ||
Structure | IP67 or equivalent | ||
Materials for contact with fluids | SUS 316L, PPS, FKM | ||
Steam sterilization | 140°C / 0.6 MPa, (within 60 minutes) | ||
Connection bore diameter | IDF / ISO 1.5 S ferrule | IDF / ISO 2.0 S ferrule | |
Weight | Approx. 2.0 kg with a 10 m Cable | ||
Cables | Lead | 10 m Y-shaped terminal | |
Connector | Relay cable(SK series(ex.SK-10M)) |