APDA-372

Analyseur de poussières dans l'air ambiant

The APDA-372 Ambient Dust Monitor provides continuous and simultaneous real-time measurements of PM1, PM2.5, PM4 (respirable fractions), PM10 (thoracic fractions), TSP (Total Suspended Particulates) and particle number concentration.

Based on the QAL1-approved (EN 16450) optical light-scattering principle, the system is equipped with an LED light source offering highly stable output and a long service life.

With an aerosol flow of 4.8 L/min, the analyzer is equipped with a Sigma-2 sampling head, allowing representative measurements even under strong wind conditions. Furthermore, the sampling system features an Intelligent Aerosol Drying System (IADS) as well as sensors for measuring ambient temperature, air pressure and relative humidity. The IADS prevents erroneous particle classification caused by moisture.

Segment : Process et Environnement

Division : Air Ambiant

Fabricant : HORIBA Europe GmbH

Produit de base : Série AP-370

Features and Benefits

Mesure continue et simultanée en temps réel de plusieurs valeurs de PM
Additional information through particle number concentration
Time resolution adjustable from >1s up to 24h
Light source: LED with high stability and long service life
Durable design for long-term operation
Low maintenance; calibration can be checked on-site
Intuitif et facile à utiliser
Reliable operation
Aucun matériau radioactif
Réduit vos frais d'exploitation

The modular design of the APDA-372 system facilitates its assembly in existing 19-inch racks. This system includes a filter holder for absolute filters with diameters of 47 mm or 50 mm. This enables on-site gravimetric correlation. It also enables subsequent chemical analysis of aerosol composition.

Caractéristiques

Modèle	APDA-372 / APDA-372E with separated sensor unit
Application	Ambient Dust Measurement
Approvals	QAL1 according to EN 15267-1, EN 15267-2 and EN 16450 for PM2.5 and PM10
Principe de mesure	Optical light scattering
Reported data (simultaneous)	PM1, PM2.5, PM4, PM10, TSP, particle number concentration
Size channels	64
Measurement range (particle size)	0.18 – 18 µm
Measurement range (number)	0 – 20,000 particles/cm³
Measurement range (mass)	0 – 10,000 µg/m³
Time resolution	1 s – 24 h (or on demand)
Aerosol flow	4.8 L/min (0.3 m³/h)
Working temperature	5 – 40 °C (41 – 104 °F)
Data acquisition	Digital, 20 MHz processor, 256 raw data channels
Alimentation électrique	115 – 230 V, 50 – 60 Hz
Consommation d'énergie	60 W, max. 200 W
Dimensions (H x W x D)	180.5 × 450 × 320 mm, 19-inch compatible, 4 HE, 84 TE
Poids	9.3 kg (20.5 lbs)
interface utilisateur	7-inch touchscreen with 800 × 480 pixels
Data logger	SSD card, sufficient for 2 years data
Connectivity	LAN, Wi-Fi, RS-232/485, USB, optional external GPRS/UMTS modem
Operating system	Windows 10 IoT Enterprise