HE-960CW

面板安裝型雙通道電導率儀（電導率計）

蒸氣滅菌期間藥物水管理和溫度監測的理想選擇。

從純水到2000μs/cm的水質管理的理想電導率計。水質確定功能專為製藥業設計，符合USP <645>（美國藥房），使其非常適合管理藥水（例如注入水）（WFI）。提供符合各國的藥典（USP，EP）的藥物製造流程的感測器陣容，以及適合樣品特性的感測器。使用面板安裝變送器可以降低安裝成本。

製造商: HORIBA Advanced Techno Co., Ltd.Finesse Solutions, LLC

Diverse lineup of sensors available
We offer general-purpose sensors suitable for pure water and boiler water control and wastewater treatment monitoring, as well as sensors for pharmaceutical manufacturing processes that comply with the pharmacopoeias of various countries (USP, EP, JP). Materials that can accommodate specialized water requirements are also offered.

Possible to be used in a panel-mounted configuration
This transmitter is easy to install while providing standard functions.

2-channel specification
Allowing measurement at 2 points, and capable of displaying salt removal rate.

Product name	Industrial 2-channel conductivity meter
Model	HE-960CW
Measurement method	Electrode type (2-electrode method)
Sensor input	2 channels (for concurrent measurement with sensors isolated each other)
Cell constant	0.01/cm, 0.1/cm, or 1.0/cm
Temperature sensor specifications	Platinum resistance 1000 Ω/0℃
Measuring range	Cell constant (/cm)		0.01 (ESD/ESL/ESH-001)	0.1 (ESD/ESL/ESH/FS-01)	1.0 (ESD/ESL/ESH-1)
	Conductivity range	(μS/cm)	2.000/20.00	2.000/20.00/200.0/2000*	200.0/2000
	Conductivity range	(mS/m)	0.2000/2.000	0.2000/2.000/20.00/200.0*	20.00/200.0
	TDS conversion	(mg/L)	2.000/20.00	2.000/20.00/200.0/2000*	200.0/2000
	*: Applicable for only sanitary sensor (FS-01 series)
	Temperature		0℃ to 100℃
	Desalination rate		0.0% to 100.0%
	Conductivity difference		Depends on measurement range of sensor 2 (CH2).
Repeatability	Conductivity display		Within ±0.5% of the full scale (in equivalent input) 2000 μS/cm and 200.0 mS/m ranges of FS-01: Within ±2% of the full scale
Repeatability	TDS conversion display		Within ±1.5% of the full scale (in equivalent input)
Linearity	Conductivity display		Within ±0.5% of the full scale (in equivalent input) 2000 μS/cm and 200.0 mS/m ranges of FS-01: Within ±2% of the full scale
Linearity	TDS conversion display		Within ±1.5% of the full scale (in equivalent input)
Display/output range	Conductivity		Measurement range
	Temperature		−30℃ to 160℃
	Desalination rate		0% to 100%
	Conductivity difference		Measurement range of sensor 2 (CH2)
Transmission output	Number of outputs: 4 4 mA to 20 mA DC/0 mA to 20 mA DC, input/output isolated type Maximum load resistance: 900 Ω Transmission output range: Freely selectable within the measurement range(Negative terminals of each transmission output channel are connected inside and thus have the same electric potential.)
Contact output	Number of outputs: 4 Alarm contact outputs (R1, R2, and R3) Contact type: relay contact, SPST (1a) Contact rating: 240 V AC, 3 A and 30 V DC, 3 A (resistance load) Contact function: selectable from the upper/lower limit action (ON/OFF control), delay, and hysteresis. Output contents: selectable from the selected measurement, USP assessment,anomaly alarm and maintenance. Alarm contact output (R4) Contact type: relay contact, SPDT (1c) Contact rating: 240 V AC, 3 A and 30 V DC, 3 A (resistance load) Contact function: selectable from the upper/lower limit action (ON/OFF control), delay, and hysteresis. Output contents: selectable from the selected measurement, USP assessment,anomaly alarm and maintenance. (However, R1 and R2, and R3 and R4 share the common contacts respectively.) Contact operation (operation between C and NO for R1 to R4) When selected measurement, USP assessment, or maintenance is selected in output contents: Contact point becomes “CLOSE” at control operation and “OPEN” at normal state (including power shutdown). When anomaly alarm is selected in output contents: Contact point becomes “CLOSE” at normal state and “OPEN” at anomaly state (including power shutdown). (When between C and NC is used with R4, contact point becomes reverses state with that of between C and NO.)
Communication output	RS-485 input/output
Calibration function	Conductivity: Based on the specified compensation coefficient for cell constant (parameter input). Temperature: Calibrated by comparing with the reference thermometer. TDS: Conversion using a user-defined coefficient value (0.30 to 1.00).
Transmission output hold feature	Previous value hold Optional value hold Selectable from the above (However, only the previous value hold is available in the maintenance mode.)
Self-diagnosis function	Sensor diagnosis Short-circuit and disconnection of the temperature sensor Out of the measurement range Converter error
Temperature compensation	Temperature characteristic of NaCl (reference temperature: 5℃ to 95℃) Arbitrary temperature coefficient entry. (reference temperature: 5℃ to 95℃: temperature coefficient: ±5%/℃) (In the deionized water area, however, the temperature compensation for deionized water is automatically performed in both NaCl and arbitrary temperature coefficient compensation settings.) No temperature compensation
Temperaturecompensated range	0℃ to 100℃
Ambient temperature	−5℃ to 55℃
Relative humidity	20% to 85% (without dew condensation)
Storage temperature	−25℃ to 65℃
Power supply	Rated voltage 100 V to 240 V AC, 50 Hz/60 Hz, 25 VA (maximum)
Structure	Indoor-use panel installation type Panel case: ABS, Terminal: PBT Panel: IP65 dust and water proof structure
Protective structure	Panel: IP65 (IEC60529, JIS C0920) Rear case: IP20, Terminal:IP00 Class II device (IEC61010-1) Pollution level 2 (IEC61010-1)
Conforming standards	CE Marking		EMC Directive: EN61326-1 Low Voltage Directive: EN61010-1 RoHS Directive: EN50581
Conforming standards	FCC Rule		FCC Part15
External dimensions	96 (W) mm × 96 (H) mm × 115 (D) mm Case depth: approx. 105 mm (when panel-mounted)
Mass	Approx. 550 g
Compatible sensors	Sensor type		Model	Cell constant (/cm)	Temperature coefficient of temperature sensor (ppm/℃)
	Insert type		ESD/ESL series	0.01, 0.1, 1.0	3750
	Insert type		ESH series	0.01, 0.1, 1.0	3850
	Sanitary insert type		ESD-01C-SN1.5	0.1	3750
	Sanitary insert type		ESH-01C-SN1.5	0.1	3850
	Sanitary flow-through type		FS-01C-SL series	0.1	3750
	Sanitary flow-through type		FS-01FC-SL series	0.1	3850