APSA-370

Ambient Sulfur Dioxide Monitor

The APSA-370 is a device for the continuous monitoring of atmospheric SO₂using UV fluorescence. The APSA-370 employs an proprietary, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry-method, due to its minimal maintenance requirements capability of continuous monitoring and instantaneous analysis of gas in its unaltered state, has been a preferred method for monitoring the atmospheric pollution.

Segment: Process And Environmental

Division: Ambient

Manufacturing Company: HORIBA, Ltd.

Base product: AP-370 series

• UV-fluorescent detector resistant to moisture interference; Low range: 0-0.05 ppm F.S.
• Alternately to FDP measurements, the detector design is highly SO₂ selective and requires no supplemental gas.
• Integral HC-cutter with a selective membrane eliminates interfering components.
• Incorporates a lamp intensity compensator.
• Uses a built-in inert PTFE sample inlet filter.

Related Applications

Principle	UV fluorescence (UVF)
Application	SO₂ in ambient air
Range	Standard ranges: 0-0.05/0.1/0.2/0.5 ppm; auto range ~ manual range selectable; can be operated by remote switching. Optional (measurable) ranges: 4 ranges selectable from 0-10 ppm, within 10 times range ratio; auto range ~ manual range selectable; can be operated by remote switching.
Repeatability	±1.0% of F.S.
Linearity	±1.0% of F.S.
Sample gas flow rate	Approx. 0.7L/min
Indication	Measured value, range, alarm, maintenance screen
Alarms	During AIC, zero calibration error, span calibration error, temperature error in catalyzer, etc.
On-screen messages are available in four languages	English, German, French, and Japanese.
Input/output	• 0-1 V/0-10 V/4-20 mA, to be specified (2 systems: either (1) momentary value and integrated or (2) moving average value) • Contact input/output • RS-232C
Power	100/110/115/120/220/230/240 VAC, 50/60 Hz (to be specified)
Dimensions	430(W) x 550(D) x 221(H) mm
Mass	Approx. 19 kg.