Water Electrolysis Evaluation

With our water electrolysis evaluation system technology for high pressure, we do not only contribute to the development of technologies for "producing" and "storing" hydrogen at high pressure, but also provide analysis and measurement technologies related to renewable energy, as well as "turnkey management" proposals that provide total support for the design and construction of facilities, thereby helping to improve the usage rate of green hydrogen.

Water electrolysis is a mechanism that "creates" hydrogen by electrolyzing water into oxygen and hydrogen using the power of electricity.

There are four major types of water electrolysis equipment:

  • Polymer Electrolyte Membrane Water Electrolysis (PEMWE)
  • Alkaline Water Electrolysis (AWE)
  • Solid Oxide Electrolysis Cell (SOEC)
  • Anion Exchange membrane Water Electrolysis (AEMWE)

As the name implies, water electrolysis requires electricity, and hydrogen produced from electricity produced from renewable energy sources (wind, solar, hydro, geothermal, wave, biomass, etc.) that do not emit CO2 is called "green hydrogen" and is highly anticipated as the ultimate clean energy technology.

 

Table of Contents

Challenges in Water Electrolysis

In the production of green hydrogen by water electrolysis using renewable energy, it is important to improve the performance, durability, and low cost of the water electrolysis and steam electrolysis equipment, which is the core of the process.

Recently, the R&D of water electrolysis and fuel cell integrated cells has accelerated. In order to accelerate the R&D of electrolytic cells, it is the key to have facilities that can analyze the materials of electrodes, electrolytes, and separators, as well as comprehensively evaluate various electrolytic cells and stacks in various test environments, for example, by varying the flow rate, temperature, and humidity of PEM and SOEC cells and stacks.


Global Initiatives

Participation in the H2Giga project

Germany: Participation in the "H2Giga" project
For example, Germany, which has a higher ratio of renewable energy than Japan, is focusing on the industrialization of green hydrogen generation through water electrolysis generated from renewable energy. Therefore, investments are focused on the development of practical technologies, whether alkaline, PEM, or SOEC, that can be scaled up from the laboratory or demonstration level to the gigawatt (GW) class as quickly as possible.
HORIBA FuelCon in Germany is also participating in the "H2Giga" project initiated by the German federal government due to its advanced water electrolyzer evaluation technology.

Reference link: Federal Ministry of Education and Research (BMBF) "H2Giga" project (German)


"Measurement and Analysis" for Hydrogen Station Evaluation

Performance Evaluation of Water Electrolysis

We propose a wide range of performance and efficiency evaluation of water electrolysis cells and stacks with optimally controlling water temperature and flow rate.

HORIBA Solutions >>
Testing of PEM and alkaline Electrolyzer:  Evaluator EC/ES
Testing of SOFC/SOEC Electrolyzer: Evaluator HT Series

Water Quality Monitoring of Electrolyzed Water

In alkaline water electrolysis, it is necessary to control the conductivity of the water to be electrolyzed. When measuring the conductivity of alkaline water at high temperatures, ordinary electrodes are fragile, but our proprietary "ToupH" conductivity electrodes are robust enough to withstand high-temperature alkaline water.
In solid polymer (PEM)  water electrolysis, the conductivity of the water to be electrolyzed is measured to determine how much of the water contains impurities that affect the electrolysis process.
We offer a wide range of pH and water quality analyzers, which are the our founding products, for both continuous measurement on the line and for laboratory use.

HORIBA Solutions >> 
For controlling electrolytic water
For Process: pH, Conductivity and Water Quality Analyzers H-1 Series 
For R&D: Laboratory pH and Water Quality Analyzers LAQUA Series 

 

Photovoltaics Material Analysis

Photovoltaic power generation is once again in the spotlight as one of the renewable energy sources that are attracting attention toward the realization of a carbon-neutral, decarbonized society.
HORIBA proposes analytical methods for crystallinity, elemental distribution, carrier lifetime, etc. of various solar cell materials such as silicon solar cells, compound semiconductor solar cells, and organic thin film solar cells.

HORIBA Solution >>
Photovoltaics Material Analysis Solutions

 


Engineering Support

Turnkey Solutions

When launching a test building to handle hydrogen, more stringent safety measures are required than before.

Our turnkey solution, a total laboratory construction package, includes ordering multiple contractors, meetings to determine specifications, safety, process and quality control of construction, as well as post-introduction operation, maintenance, and work efficiency, all with an emphasis on safety and ease of use until just before the start of laboratory operations. We can handle the entire construction process on behalf of our busy customers.


Find Us on YouTube

HORIBA's Hydrogen Solutions

Application Laboratory Virtual Tour


Information

Why HORIBA

With our corporate philosophy of contributing to the development of science and technology and the preservation of the global environment, we are constantly in pursuit of "HONMAMON" technology.

Global Initiatives

HORIBA participates in the optimization of overall energy management and the realization of a safe and secure mobility society through bold global investments and extensive connections with academia and industry

Global Trends and Strageties toward Carbon Neutrality

Introduction of the latest trends through HORIBA's unique activities and perspectives


Fuel Cell

Evaluation of fuel cell materials, production processes, and cell and stack performance

FCV

Various performance evaluation technologies and engineering proposals for fuel cells for FCVs

Stationary Fuel Cell

Various performance evaluation technologies and engineering proposals for fuel cells for stationary use

Engine/Generator Turbine

Measurement and evaluation of hydrogen and ammonia engines/gas turbines for power generation (Engine/Generator Turbine)

Hydrogen Station

Contribution to improved safety, quality, and operational efficiency of hydrogen stations

H2 Production

Global support for measurement and analytical instrumentation in the hydrogen production process

Hydrogen Energy TOP

We are committed to realize a smarter way of operating energy in the following 3 parts. The way we "Generate," "Store," and "Utilize" energy can come with higher efficiency, lower emissions, and minimal energy loss.

Related Information on Hydrogen Energy

제품 문의

HORIBA제품의 자세한 정보를 원하시면, 아래의 양식에 내용을 입력을 부탁드립니다.

* 는 필수입력항목입니다.