GA-370

Trace Gas Monitor

For monitoring quality control of manufactured high-purity gases at air separation and semiconductor plants

GA-370 provides constant, ultrahigh-sensitivity and high-precision monitoring of trace impurities (CO, CO2 and CH4) for quality control at gas manufacturing facilities.


Introduction and application of GA-370

Ultra-high Sensitive Measurements

  • A cross-flow modulation dual-beam non-dispersive infrared (NDIR) analyzer provides continuous and stable zero drift-free measurements.
  • Minimum detection limit (MDL) of 10ppb which can support applications where high accuracy measurements are required.

 

Measurement of trace impurities in a balance gas

  • Representative gases such as N2, O2, He, Ar, H2 and Air are supported.

 

Easy maintenance-free operation

  • Operator friendly screen menus simplify analyzer operation, calibration and measurements
  • No optical alignment ever required.
  • A touch color LCD display allows operators to view graphs of accumulated data.

 

Application

  • Trace Impurities Monitoring at Air Separation Plants

Air separation plant separates atmospheric air into its primary components oxygen (O2), nitrogen (N2), and argon (Ar) by distillation at cryogenic temperatures.

Separation of air is performed using the difference in the boiling points of each constituent gas in the distillation unit, but the air must be treated in the pre-purification unit (PPU) before getting into cryogenic distillation process. PPU is designed to remove water vapor, carbon dioxide (CO2), and other impurities contained in the air to ensure water and CO2 does not enter into the distillation unit, where it could cause plugging in the process and create the risk of explosion.

The HORIBA GA-370 Trace Gas Monitor is a useful tool for continuous monitoring of impurities that might be present in the separated gas for safety control. Also, it could be used for measurement of impurities (CO, CO2, CH4) in final product of O2, N2 and Ar for quality assurance.

Principle of Measurement

  • Cross-Modulation Dual-Beam Non-Dispersive Infrared Method

Cross-Modulation NDIR method uses a solenoid valve that switches at a fixed cycle (e.g., 1 Hz) to synchronously and alternately flow a sample gas and a reference gas into the one gas cell to obtain a modulated concentration signal of the gas to be measured.

In this method, when the sample gas and the reference gas are the same gases (zero point), no modulation signal is generated. Absence of mechanical parts such as a rotating sector enables long-term stable output signal.

In cross-modulation dual-beam NDIR method, the use of double beam (light source) and a double cell allows the sample gas and the reference gas to flow alternately into the two cells, the diaphragm of the condenser microphone inside the detector moves to the left and to the right, providing twice the amount of signal comparing with the method when using a rotating sector, thereby improving the SN ratio.

The graph shows the noise level of the cross-modulation dual-beam non-dispersive infrared method, which is extremely low and stable. Thus, even in the measurement of trace concentrations of impurities in high-purity gases, this zero-drift free method provides long-term stability and low noise level.


 

Related Applications

 

Explore more 

▶ Hydrogen Quality Check for FCV at On-Site Hydrogen Station

 

 

Model GA-370
Gases measured CO, CO2, CH4
Bulk gases N2, O2, He, Ar, H2, Air
Number of measurement components 1 component or 2 components (specify a measuring balance gas)
Measuring principle Cross-flow modulation non-dispersive infrared (NDIR) absorption method
Measurement ranges 0 to 1/2/5/10 ppm
Lowest detection limit (2σ) 10 ppb
Repeatability ≤ ± 2% of full scale
Indication error ≤ ± 2% of full scale
Zero Drift ≤ ± 0.02 ppm/day, ≤ ± 0.03 ppm/week
Span Drift ≤ ± 2% of full scale/day, ≤ ± 2% of full scale/week
Response time (T90) 

≤ 180s

Gas flow rate Sample gas : approx. 3.5L/min, reference gas : approx. 3.5L/min, span gas: approx. 3.5L/min

Note: A delivery pressure of 50-100kPa is recommended for both sample and reference gas.

Analog output 

Max. 2 channels isolated output (2 components)

Select one from 0 to 1V, 0 to 10V, 0 to 16mA, 4 to 20mA or 0 to 20mA.

Current output : Allowable load resistance 750Ω or less

Installation conditionsAmbient temperature0 to 40°C
Ambient relative humidity≤85%
DustLess than environmental standard 
Vibration≤ 0.29m/s², at ≤ 100Hz 
External dimensions, weight 430(W) x 221(H) x 555(D) mm (excluding protrusions), approx. 18kg
Power supply 100 to 240V AC, ≤ ± 10% (max. voltage: 250V AC)
Power consumption Approx. 100VA
Test Gas Generation in Research and Testing Laboratories
Test Gas Generation in Research and Testing Laboratories
Low Concentration Gas Monitoring in Coal and Consumable Fuels
Low Concentration Gas Monitoring in Coal and Consumable Fuels

Request for Information

Do you have any questions or requests? Use this form to contact our specialists.

* These fields are mandatory.

Related products

APMA-370
APMA-370

Ambient Carbon Monoxide Monitor

MU-2200
MU-2200

Mixed Gas Generators MU Series

SEC-8000 F/D/E Series
SEC-8000 F/D/E Series

High Temperature Digital Mass Flow Controller

TFH-01/47
TFH-01/47

PTFE Filter/TFH membrane

TU Series
TU Series

Test Gas Generation Systems

51 series
51 series

Explosion-proof Gas Analyzer

AP-370 Series
AP-370 Series

Air Pollution Monitor

APCA-370
APCA-370

Ambient Carbon Dioxide Monitor

APHA-370
APHA-370

Hydrocarbon Monitor / THC Analyser

APMA-370
APMA-370

Ambient Carbon Monoxide Monitor

APNA-370
APNA-370

Ambient NOx Monitor

APNA-370/CU-2
APNA-370/CU-2

Ambient Ammonia Monitor

APOA-370
APOA-370

Ambient Ozone Monitor

APSA-370
APSA-370

Ambient Sulfur Dioxide Monitor

APSA-370/CU-1
APSA-370/CU-1

Ambient Hydrogen Sulfide Monitor

AQMS
AQMS

Ambient Air Quality Monitoring System

CEMS
CEMS

Continuous Emission Monitoring System

ENDA-5000 series
ENDA-5000 series

Stack Gas Analysis System

FTX-ONE-CL
FTX-ONE-CL

FTIR Exhaust Gas Analyzer Dilute Measurement Type

FTX-ONE-CS/RS
FTX-ONE-CS/RS

FTIR Exhaust Gas Analyzer Direct Measurement Type

GI-700 series
GI-700 series

Stack Gas Analyzer

IR-300
IR-300

Vapor Concentration Monitor

IR-400
IR-400

High-grade type Gas Monitor for Chamber Cleaning End Point Monitoring

MEXA-1170HCLD
MEXA-1170HCLD

Heated Type NOx Analyzer

MEXA-1170HFID
MEXA-1170HFID

Heated Type THC Analyzer

MEXA-1170SX
MEXA-1170SX

Motor Exhaust Gas Sulfur Analyzer

MEXA-1300R
MEXA-1300R

Motor Exhaust Gas Analyzer

MEXA-584L
MEXA-584L

Automotive Emission Analyzer

MEXA-ONE
MEXA-ONE

Motor Exhaust Gas Analyzer

MEXA-ONE-FT
MEXA-ONE-FT

FTIR Motor Exhaust Gas Analyzer

MEXA-ONE-QL-NX
MEXA-ONE-QL-NX

Laser Spectroscopic Motor Exhaust Gas Analyzer

OBS-ONE GS Unit
OBS-ONE GS Unit

On-board Emissions Measurement System

OBS-ONE-XL (IRLAM)
OBS-ONE-XL (IRLAM)

On-board NH3/N2O Measurement System for real-world driving

PG-300 series
PG-300 series

Portable Gas Analyzer

Process
Process

Process Analyzer System

TX-100
TX-100

Tunable Laser Gas Analyzer

VA-5000 / VA-5000WM Series
VA-5000 / VA-5000WM Series

Multi-Component Gas Analyzer

51 series
51 series

Explosion-proof Gas Analyzer

AP-370 Series
AP-370 Series

Air Pollution Monitor

AP-380 Series
AP-380 Series

Air Quality Monitor

APCA-370
APCA-370

Ambient Carbon Dioxide Monitor

APMA-370
APMA-370

Ambient Carbon Monoxide Monitor

BE-150
BE-150

OEM gas (CO/HC) analyzer

BE-220FSD
BE-220FSD

OEM gas (NO) analyzer

CEMS
CEMS

Continuous Emission Monitoring System

EMGA-921
EMGA-921

Analyseur d'hydrogène

EMGA-Expert
EMGA-Expert

Analyseur d'oxygène/azote/hydrogène
(modèle haute précision)

EMGA-Pro
EMGA-Pro

Analyseur d'oxygène/azote (modèle d'entrée de gamme)

EMIA-Expert
EMIA-Expert

Analyseur de carbone/soufre
(modèle haute précision)

EMIA-Pro
EMIA-Pro

Analyseur de carbone/soufre (modèle d'entrée de gamme)

EMIA-Step
EMIA-Step

Analyseur de carbone/soufre (modèle avec four tubulaire à résistance électrique)

ENDA-5000 series
ENDA-5000 series

Stack Gas Analysis System

ENDA-7000 Series
ENDA-7000 Series

Stack Gas Analyzer

GI-700 series
GI-700 series

Stack Gas Analyzer

IR-300
IR-300

Vapor Concentration Monitor

IR-400
IR-400

High-grade type Gas Monitor for Chamber Cleaning End Point Monitoring

LO-300
LO-300

Laser scanning oil film detector

MEXA-1300R
MEXA-1300R

Motor Exhaust Gas Analyzer

MEXA-584L
MEXA-584L

Automotive Emission Analyzer

MEXA-ONE
MEXA-ONE

Motor Exhaust Gas Analyzer

OBS-ONE GS Unit
OBS-ONE GS Unit

On-board Emissions Measurement System

OBS-ONE-XL (IRLAM)
OBS-ONE-XL (IRLAM)

On-board NH3/N2O Measurement System for real-world driving

OCMA-500
OCMA-500

Oil content analyzer

OCMA-550
OCMA-550

Oil content analyzer

PG-300 series
PG-300 series

Portable Gas Analyzer

TCA-5000
TCA-5000

Hydrogen Gas Analyzer

TX-100
TX-100

Tunable Laser Gas Analyzer

VA-5000 / VA-5000WM Series
VA-5000 / VA-5000WM Series

Multi-Component Gas Analyzer

Corporate