OZGU-370SE

Ozone Transferstandard

The calibration unit OZGU-370SE is designed for the dynamic and continual manufacture of zero and span gas to perform all ongoing quality control procedures according EN 14625. Transferstandard OZGU-370SE is based on well proven Analyzer APOA-370 with integrated span gas generation unit (ASGU-370 Electronic). This Span gas unit is able to provide ozone gas to an 2nd Ozone monitor. The actual concentration is measured by the type approved measurement cell of the transfer standard. The measured concentration is used as set point for the 2nd Ozone analyzer (measurement unit to be calibrated).

 

Division: Ambient
Manufacturing Company: HORIBA, Ltd.
Base product: APOA-370
  • Multipoint calibration acc. EN 14625
  • Comfortable operation via 2 big illuminated Touch-Screen-Displays or remote software enables easy external handling
  • High flexibility through 20 free selectable span points
  • High flexibility through free definable cycles (e.g. Lack of fit)
  • High flexibility through free definable sequences (stringing cycles together) 
  • Programmable timer allows time delayed start of calibration process
  • Internal data logger (option) stores raw values from calibration procedure (set value and actual value, status) for reporting with included evaluation software

 

 

Technical Specification (Analyzer)

Refer to APOA-370, Ozone Analyzer

Technical Specification (Span Gas Generator Unit)

Principle

UV irradiation

Application

Quality control in Station
Quality control in Laboratory
Preparing Zero and Span gas for O3 multi point calibration

Ozone generation by UV Irradiation

Intensity controlled mercury lamp in a oven with a heater and Pt 100 sensor (Temperature: 70C°)
Indication of actual temperature on display

Zero Air Supply

External cartridge (mounted on unit)

Selectable span gas concentrations 

20  (Option: controlled ozone set values)

Selectable cycles

8

Programmables sequence

yes

Programmable timer

yes

Evaluation software

Option

Datalogger

Option

Indication

TFT touch screen displays with simultaneous indication of information, relevant for calibration

Operation

Manual (Touch Screen Display)
External via RS232 (Gesitec Protocol)
External via Ethernet (Remote Software)

Power230VAC, 50Hz 
Dimension430mm(W), 550mm(D), 221mm(H)

Mass

17kg

Request for Information

Do you have any questions or requests? Use this form to contact our specialists.

* These fields are mandatory.

Related products

AP-370 Series
AP-370 Series

Air Pollution Monitor

AP-380 Series
AP-380 Series

Air Quality Monitor

APOA-370
APOA-370

Ambient Ozone Monitor

GI-700 series
GI-700 series

Stack Gas Analyzer