LY-9609 High Concentration Cell

This accessory for the Partica LA-960V2 allows for measurement of high concentration, low viscosity samples. Understand the particle dispersion state of high concentration slurry, such as positive and negative electrode materials of secondary batteries, inks, paints, pigments, emulsions, etc.

事業部: Scientific

產品分類: Particle Characterization

製造商: HORIBA, Ltd.

The high concentration cell unit allows measurement closer to original concentration with low dilution rates, without dilution and variable concentration.

Measure without dilution: Inks, paints, pigments, emulsions
Positive and negative electrode materials of secondary batteries etc.
Observe changes in the agglomeration state based on concentration etc.
Agglomerated was found when a battery was measured near to original concentration

Comparison of the results of undiluted suspension measurement and flow measurement (diluted with dispersant)

Evaluation on the dispersibility of the catalyst-ink for MEA of the fuel cell

Laser Scattering Particle Size Distribution Analyzer Partica LA-960V2 can evaluate the dispersion of catalyst ink particles. By evaluating the dispersion of catalyst ink, which is one of the causes of cracks in the catalyst layer of the MEA after durability testing, it becomes possible to contribute to the improvement of power generation efficiency and thick film formation.

詳情

Particle Sizing of the Catalyst Ink for the Cathode Material of the Fuel Cell

Knowing the particle size distribution of catalyst ink before coating can predict the battery performance, and prevent the fault occurrence of electrodes, and finally enable the shortening of the manufacturing process of the fuel cell.

詳情

Measuring Organic Pigments with the HL Cell Accessory

The High-concentration Low-viscosity Cell (HL Cell) is an accessory for the LA-960V2 laser diffraction particle size analyzer that aids in measuring samples of low viscosity or high concentration. Since liquid inks, dyes, and pigments are often high concentration, the HL Cell is a useful accessory for measuring them.

詳情

Measuring 1 μm PSL Standard with the HL Cell accessory

Mono-disperse polystyrene latex (PSL) standards are commonly used to verify accuracy and proper operation of laser diffraction particle size analyzers. As these materials are somewhat different from normal materials, proper conditions and procedures are necessary to ensure correct results.

詳情

尺寸 8.15 MB

Partica LA-960V2 Brochure

尺寸 1.55 MB

Partica LA-960V2 flyer