Automatic Total Organic Carbon Analyzer (On-line TOC analyzer)
As part of HORIBA's on-line water quality analyzer lineup dedicated to safeguarding global water quality through analytical technology, a precise and reliable total organic carbon analyzer has been developed.
On-line water quality monitoring contributes to the efficiency improvement of wastewater management.
To meet a wide range of measurement needs and the demands of challenging environments, our system is equipped with highly scalable hardware and user-friendly software.
*
*
Optional features
1200°C combustion oxidation method
- No catalyst required
- Capable of handling high-concentration samples ranging from 0 to 20000 mg/L C with its high oxidative decomposition power.
(However, it may vary depending on the measurement environment and sample characteristics.)
- Compatible with a wide range of applications.
- Less prone to furnace blockage even with high concentration and high salinity samples.
Achieves high-speed processing
Total Carbon (TC): Minimum 1 minute, Non-Purgeable Organic Carbon (NPOC): Minimum 3 minutes
*May be affected by installation conditions, sample water conditions, and settings.
Continuous and stable measurements can be achieved
Through monitoring device status with each sensor, we are approaching Condition Based Maintenance (CBM).
*May be affected by installation conditions, sample water conditions, and settings.
Reduction of residue effects
Incorporating functions to reduce residue effects and an automatic cleaning feature using pure water, allow the system to respond effectively during flow path switching or concentration fluctuations.
*May be affected by installation conditions, sample water conditions, and settings.
ANALYTICAL PERFORMANCE
| Measurement ranges | 0-1 ppm, 0–1 00 ppm, 0–1 .000 ppm, 0–1 0.000 ppm (optional: 0–1 00.000 ppm) |
| Limit of detection | 0,1 ppm |
| Cycle time TOC(NPOC) | < 3 min. |
| Cycle time TC/TOC | 1 min. |
| Repeatability | ± 2 % end-of-range |
| TDS | up to 200 g/l (20% NaCl) |
| Particles | < 2.000 microns (optional: homogenizer and sample preparation) |
PHYSICAL PROPERTIES
| Weight | < 55 kg |
| Dimensions | 800 H × 600 W × 320 D mm |
| Power | AC 110 – 230V ±10V, 50/60 Hz, Approx. 600 VA |
| Carrier gas | CO2 free instrument air |
ENVIRONMENTAL CONDITIONS
| Indoors | 2 – 45 °C |
| Relative humidity | < 85 % (no condensation) |
| Housing | IP 54, IP 65 (optional: NEMA4X) |
| Ex p-Enclosure | Zone 1/2, T3 and T4, ATEX & IECEx |
COMMUNICATION
| Display | 7“ Touch Panel |
| Supported protocols | OPC UA, Ethernet, Profinet,Modbus |
| Communication | Bluetooth, WLAN, GSM, 5G |
| Relays | 4 programmable - NAMUR standard |
| Languages | German, English, Japanese, Chinese, Korean |
Do you have any questions or requests? Use this form to contact our specialists.
