Applications

Wear metals and additive Elements Analysis.

Lubricating oils are used in very difficult conditions in engines reaching high temperatures and varying pressure conditions in contact with many metallic parts. The lubricating function of the oil can be modified according to the amount and the nature of the metals present. The analysis of used oil is an effective tool to ensure the control of the lubricating function of the oil. Moreover, monitoring the wear metals content can be used as a diagnostic to schedule preventive maintenance. In fact, preventive maintenance will reduce the cost directly linked to materials and parts but also due to down-time. Any harm or damage that may result from an engine failure may also be avoided.

The robustness of ICP-OES and its ability to handle organic solvents and to analyze many elements make this technique the best choice to perform such diagnostics. A simple dilution of the sampled oil in an organic solvent, as kerosene, has to be done so no tedious sample preparation is necessary and the analysis is performed within a few minutes.

Browse Products

Ultima Expert LT
Ultima Expert LT

Affordable high performance ICP-OES

Ultima Expert
Ultima Expert

High resolution, high sensitivity and high stability ICP-OES

XGT-7200
XGT-7200

X-ray Analytical Microscope

Запросить информацию

У вас есть вопросы или пожелания? Используйте эту форму, чтобы связаться с нашими специалистами.

* Эти поля обязательны для заполнения.

Corporate