Torque Matching

HORIBA Automotive Torque Matching dyno replication

Road-to-Rig Chassis Dyno Replication

Our patented torque matching technique gives unrivalled laboratory replication accuracy. Bring the real-world into the lab. Perfect for electric vehicle (EV) range, emissions, on-board diagnostic (OBD), or quality investigations.

This patented technique, makes use of driver robots and environmental simulation equipment to accurately replicate the operation of a vehicle in the lab. Resulting in an almost perfect replication of the energy used by a vehicle in a real-world road test. It is the most accurate way of replicating and emulating vehicle tests in a controlled laboratory environment.

Torque matching is a novel approach to enabling replication and emulation of a road test in the laboratory with a higher accuracy than RLS. As a result, our applications are embedded within the STARS Enteprise platform to give deployment flexibility.

Additionally, import any road test data from an ICE vehicle or a full battery electric vehicle. And then, use the data with non-HORIBA test automation software and automation equipment. Lastly, Combine the data with simulations to provide an easy link between simulation teams and test teams.

Segment: Automotive
Výrobní společnost: HORIBA UK Limited
Base product: Intelligent Lab

The approach doesn’t require coast down, road gradient, wind tunnel, tire resistance, or direct axle torque measurements because it relies on stimulating the vehicle in exactly the same way as during the original test drive.

A chassis dynamometer is set to achieve the exact road speed recorded during the test drive and the inputs - throttle, brake and gear changes - are perfectly replayed. As far as the vehicle’s control systems are concerned the same inputs are being given to it and the same external resistances (dyno torque) is being experienced. The result is a near perfect replication of the emissions, electrical energy use and performance when compared to the road test.

The traditional method, road load simulation (RLS), is used across the industry. However, the method makes several assumptions and uses measured data to create a road load model for a dynamometer. These assumptions and measurement tolerances mean that RLS replication is not as accurate as it could be. Torque matching gets around this problem.

Features of Torque Matching

  • Replicate a road test in the lab from minimal road test measurement data.
  • Replicate real-world scenarios repeatably and robustly
  • High accuracy replication of vehicle inputs leads to a high correlation of outputs
  • Benchmark vehicles of similar size with the same replication torque
  • Emulate the original road test with different environmental conditions (temperature, humidity, pressure) and calibrations or components and see the effect on the outputs.

Benefits of Torque Matching

  • Reduce the need for pre-test measurements to derive RLS coefficients (coastdown, rolling resistance tire testing, wind tunnel testing, road grade profiling etc.)
  • Reduce the requirement for real-world environmental testing
  • Fewer altitude or road-based tests are needed
  • Benchmark and correlate test labs with a golden vehicle accurately
  • Environmental effects can be explored quickly and repeatably
  • Check failure modes found in the fleet and evaluate corrective actions
  • Use existing hardware and automation systems from HORIBA and 3rd parties.

HORIBA Automotive R2R Torque Matching Application Software

Our Data Builder, Test Builder, and Chart Builder software enable torque matching replication and emulation capabilities. They are available as software applications that run within the STARS Enterprise environment either in the cloud or on a local computer.

The use of the software applications and the overall process of replication and emulation can be embedded into a STARS Enterprise workflow to give you a secure and repeatable process that can be integrated within the overall lab management and data control system.

  • Seamless test data capture
  • Data transformation into test procedures
  • Results recording and playback

 

Torque Matching Applications are Available on STARS Enterprise

The apps have been developed with flexibility in mind.

R2R Data Builder

Data Builder takes the recorded road test data from either a PEMS or another data logger and transforms the data so that it can be used as an input to a dynamometer automation system such as STARS VETS.

Simply upload test drive data to Data Builder via the Enterprise web interface, then manipulate the dataset to get it time aligned. Next, download the mapped channels or a CSV file to feed into the automation system.

R2R Test Builder

Test Builder processes the information from Data Builder and creates a definition of the road test in a formatted data file for the dynamometer test automation system. The automated system can then control the dyno, driver robot, and climatic systems to perfectly replicate the road test in the lab. 

    The software is initially configured for VETS 2.x and STARS EV, but it can be reconfigured to deliver files in formats suitable for other common test automation systems. 

    Test Builder processes the road data to automatically determine and define transmission changes which it uses to control robot interventions.  All instrumented pedals and selectors can be processed for control during the lab-based replication test. 

    Test Builder with torque matching is offered in two levels:

    1. Replication only for customers who only require replication of road tests (such as regulatory bodies, EPA, CARB, VCA, etc.)
    2. Replication and emulation for customers who require the capability to evaluate system changes over the measured road-test in the lab (such as OEMs and Tier 1s).
         
    R2R C­hart Builder
    • Chart Builder quickly and easily generates configurable charts from the replication and emulation test results.
    • It allows engineers to study the data and approval or reject the test. It can also highlight areas for further investigation. 
    • The solution also removes the need to transfer data to another charting software, enhancing the effectiveness of your workflow.

     

    What's Required to Set Up Torque Matching in a Laboratory

    • A chassis dyno that can run in speed mode 
    • A modern automation system
    • A driving robot
      • Accurate control over driving inputs is important to control the throttle and brake pedals and ensure high correlation to the road test.
    • Road test recording equipment
      • PEMS equipment.
    • A method of replicating the environment.
      • Either by using a climate dyno or a system which dynamically alters pressure and humidity (for ICE vehicles)

    Požadavek na informaci

    Máte nějaké dotazy nebo požadavky? Pomocí tohoto formuláře kontaktujte naše specialisty.

    * Tato pole jsou povinná.

    Related products

    CVS-ONE
    CVS-ONE

    Constant Volume Sampler

    EXFM-ONE
    EXFM-ONE

    Ultrasonic Exhaust Flow Meter

    FTX-ONE-CL
    FTX-ONE-CL

    FTIR Exhaust Gas Analyzer Dilute Measurement Type

    FTX-ONE-CS/RS
    FTX-ONE-CS/RS

    FTIR Exhaust Gas Analyzer Direct Measurement Type

    MDLT-ONE
    MDLT-ONE

    Micro Dilution Tunnel

    MEXA-1170HCLD
    MEXA-1170HCLD

    Heated Type NOx Analyzer

    MEXA-1170HFID
    MEXA-1170HFID

    Heated Type THC Analyzer

    MEXA-1170SX
    MEXA-1170SX

    Motor Exhaust Gas Sulfur Analyzer

    MEXA-1300R
    MEXA-1300R

    Motor Exhaust Gas Analyzer

    MEXA-2000SPCS series
    MEXA-2000SPCS series

    Solid Particle Counting System

    MEXA-584L
    MEXA-584L

    Automotive Emission Analyzer

    MEXA-730λ
    MEXA-730λ

    Air-to-fuel Ratio Analyzer

    MEXA-ONE
    MEXA-ONE

    Motor Exhaust Gas Analyzer

    MEXA-ONE-FT
    MEXA-ONE-FT

    FTIR Motor Exhaust Gas Analyzer

    MEXA-ONE-QL-NX
    MEXA-ONE-QL-NX

    Laser Spectroscopic Motor Exhaust Gas Analyzer

    OBS-ONE GS Unit
    OBS-ONE GS Unit

    On-board Emissions Measurement System

    OBS-ONE PM unit
    OBS-ONE PM unit

    On-board Emissions Measurement System

    OBS-ONE PN Unit
    OBS-ONE PN Unit

    On-board Emissions Measurement System

    OBS-ONE SPN10 Unit
    OBS-ONE SPN10 Unit

    On-board SPN10 measurement for real-world

    OBS-ONE-XL (IRLAM)
    OBS-ONE-XL (IRLAM)

    On-board NH3/N2O Measurement System for real-world driving

    PTFM-1000V2
    PTFM-1000V2

    Pitot Tube Exhaust Flow Meter

    PTFM-ONE-DT
    PTFM-ONE-DT

    Dual Pitot Tube Exhaust Flow Meter

    Corporate