XGT-9000

X-ray Analytical Microscope (Micro-XRF)

Next evolution of micro-X-ray fluorescence spectroscopy ultimate performance in speed and flexibility

  • High sensitivity & wide detectable element range
  • Dual types of detectors for fluorescent X-rays and transmission X-rays
  • ≥15 µm spot size with an ultra-high intensity capillary
  • High-resolution cameras and multiple illumination modes
  • Flexible & user-friendly software interface
Segment: Scientific
Výrobní společnost: HORIBA, Ltd.

Higher sensitivity and wider detection range by new detection systems

With new advanced detection systems, the XGT-9000 Pro is able to achieve higher sensitivity than before and the XGT-9000 Expert provides you the ultimate performance in sensitivity and the widest detectable element range. Having improved sensitivity reduces measurement time and boost your work efficiency while wider detectable element range expands your application possibilities.

(Left) Cu intensity comparison (Right) Super light elements intensity comparison
[1][2] All the results are compared with XGT-9000 Pro/Expert vs. HORIBA conventional micro-XRF models

 



High quality macro and micro imaging with multiple probe selection

The XGT-9000 Series provides ultimate performance and flexibility with its well designed excitation system, including high output X-ray generator (up to 50 kV and 1000 µA) and a wide selection of probe spot sizes down to 10 microns and up to 1.2 mm. Multi-probes can be installed in the instrument and switchable on the software. It allows high quality fast imaging in macro and micro level without compromising the needs of spatial resolution and measurement time over large map area. Two ultra high intensity probes of 15 µm and 100 µm can be chosen.

Elemental layered images on a Lapis lazuli stone using multi-probes
(Left) Fast scanning using 100 µm ultra-high intensity probe. (Right) Detailed imaging using 15 µm ultra-high intensity probe.

 



Dual types of detectors for fluorescent X-rays and transmission X-rays

The XGT-9000 Series provides dual types of detectors. One is a fluorescent X-ray detector which tells the elemental distribution of a sample, and the other is a transmission X-ray detector which tells the internal structure of a sample. XGT-9000 can get the two types of images of the same area simultaneously. Especially it is helpful for a better understanding of electronics, gemstones including inclusions, and biological specimens.

Simultaneous imaging of elemental image and transmission X-ray image of a printed circuit board
(Left) Elemental layered image revealed a foreign matter stuck under the IC chip. (Right) Transmission X-ray image revealed many voids under the IC chip.

 



High resolution and brilliant optical images

Capturing clear images is critical for micro-XRF analysis. The XGT-9000 series provides high resolution cameras to grasp the image of the whole sample and its details down to the microscopic level. Both images can be zoomed in and out digitally to find the best position to analyze on a sample surface flexibly. In addition, thanks to the multiple illumination systems, you can get brilliant optical images of your target sample.

(Left) Whole image                                                              (Right) Detailed image

High resolution and brilliant optical image of a fly

 



Wide applications of the sample chamber

The XGT-9000 Series accommodates a wide variety of samples such as micro size fragments, printed circuit boards, coins, sheets, powder, liquid, and wafers. Various kinds of sample holders can be provided. In addition, up to 4 measurement environments can be selected to pull up sensitivity.

Wide applications of the sample chamber

 



Flexible and user-friendly software

The XGT-9000 software (HORIBA X-RAY LAB) has a highly flexible and user friendly interface. It displays data tree, optical images, spectrum results, the periodic table, and map imaging results at a glance. Thanks to the flexibility, users can customize the layout on the screen. Moreover, the results can be displayed on multiple monitors. It allows you to see the results more clearly and boost your data analysis. Finally, reports can be generated, printed or exported to Excel, Word and PDF format.

An example of software layout on dual monitors

 

Apart from the standard software functions, advanced modules can be added to the software suite to provide more comprehensive user experiences.

  • Multilayer FPM module for thickness measurement with/without standard samples
  • RoHS module for RoHS screening
  • Queue module for automated multiple measurements in unattended mode
  • Particle Finding module for particle analysis and co localized analysis
  • LabSpec Link module for data transfer to LabSpec 6 for multivariate analysis

 



Publications

 



Application  examples


 



Product video

Watch video
­



Optional accessory for air-sensitive sample analysis – Transfer vessel

Watch video


Model
XGT-9000
XGT-9000 ProXGT-9000 CXGT-9000 Expert


Basic information

   Instrument

X-ray analytical microscope
   PrincipleEnergy dispersive X-ray fluorescence spectroscopy
   Detectable elements*F (9) - Am (95)C (6) - Am (95)B (5) - Am (95)
   Available chamber size450 mm (W) x 500 mm (D) x 80 mm (H)
   Maximum mass of sample1 kg
   Maximum mapping area100 mm x 100 mm on 300 mm (W) x 250 mm (D)


Sample observation

   Optical image observationTwo high resolution cameras
   Whole image
   Detailed image
5 million pixels, Field of view: 100 mm x 100 mm
5 million pixels, Field of view: 2.5 mm x 2.5 mm
   Optical designVertical-coaxial X-ray and optical observation
   Sample illumination / ObservationTop, bottom, side illuminations / Bright and dark fields


X-ray generator

   PowerUp to 50 W
   VoltageUp to 50 kV
   CurrentUp to 1 mA
   Target materialRh


X-ray guide tube (Probe)

   Probe spot size selectionVarious probe combination can be offered
(e.g. 15μm ultra-high intensity probe with X-ray focused spot (Mo Kα))


Detectors

   X-ray fluorescence detectorLiquid nitrogen-free Silicon Drift Detector (SDD)
   Transmission detectorNaI (Tl)


Operating mode

   Measurement environmentWhole vacuum
Partial vacuum
Whole ambient
He purge (optional)
Whole vacuum
Partial vacuum
Whole ambient
He purge (optional)

Whole vacuum
Partial vacuum
He purge (optional)


Instrument dimension (main unit)

   Instrument size680 mm (W) x 860 mm (D) x 760 mm (H)
   Mass weightApproximately 200 kg

*Under whole vacuum condition
 

Dimensions (unit: mm) 

Metal elusion imaging using micro-XRF to identify the root cause of PEMFC degradation
Metal elusion imaging using micro-XRF to identify the root cause of PEMFC degradation
Proton exchange membrane fuel cells (PEMFCs) are getting more and more popular as a clean energy, and a lot of research is being done to achieve better durability for further spread into more commercial phase.
Reverse Engineering : Investigation on the Material Trends in Lithium-ion Battery
Reverse Engineering : Investigation on the Material Trends in Lithium-ion Battery
We obtained lithium-ion battery cells from 3 different commercial electric vehicles manufactured by an automotive company for the reverse engineering investigation. We disassembled and analyzed each of the cathode sheets, the anode sheets, and the separator sheets using multiple analytical instruments.
Applications of micro-XRF for PEMFC catalyst research: Pt catalyst uniformity imaging and Pt loading mass determination
Applications of micro-XRF for PEMFC catalyst research: Pt catalyst uniformity imaging and Pt loading mass determination
The HORIBA micro-XRF system performs two applications for proton exchange membrane fuel cell (PEMFC) catalyst research: One is Pt catalyst uniformity imaging within a catalyst sheet thanks to the imaging capability. The other is Pt catalyst loading mass determination on average, which is a popular application of EDXRF. Through the experiments, we successfully visualized aggregates of Pt catalyst in our samples, and we also got a good linearity of calibration curve for Pt catalyst loading mass determination.
Using micro-XRF for Al, Fe and Cu particle detection on a cathode sheet of lithium ion battery
Using micro-XRF for Al, Fe and Cu particle detection on a cathode sheet of lithium ion battery
We analyzed a Nickel Manganese Cobalt (NMC) cathode simulation sample using a HORIBA XGT-9000 X-ray analytical microscope and performed foreign matters analysis with the Particle Finding Module software.
Foreign particles analysis on a LiNixMnyCozO2 (NMC) cathode material of lithium ion Battery
Foreign particles analysis on a LiNixMnyCozO2 (NMC) cathode material of lithium ion Battery
We used the XGT-9000 to analyze foreign particles on a lithium ion battery material. We made a NMC cathode simulation sample and added Cu particles in the sample as simulated metal foreign matter.
Elemental distribution imaging of inorganic minerals on a multivitamin supplement tablet using micro-XRF
Elemental distribution imaging of inorganic minerals on a multivitamin supplement tablet using micro-XRF
We introduced a fast and non-destructive imaging method for inorganic minerals on a multivitamin supplement tablet containing various essential minerals to body functions. We used the HORIBA XGT-9000 X-ray Analytical Microscope for the imaging, and we could visualize the distribution of the key inorganic elements on the tablet less than 20 minutes even though the concentration of the elements are tens of mg or less per tablet.
Proton Exchange Membrane Fuel Cell Material Analyses using Micro-XRF
Proton Exchange Membrane Fuel Cell Material Analyses using Micro-XRF
Proton exchange membrane fuel cell (PEMFC) mainly consists of organic materials such as proton exchange membrane, carbon supports, and carbon sheets. However, it also includes some inorganic elements such as radical quenchers and precious metal catalysts. In this application note, we introduce key applications of micro-XRF for each component of PEMFC.
The Power of Micro-XRF in Gemology – Part 1: Small Garnet Characterization
The Power of Micro-XRF in Gemology – Part 1: Small Garnet Characterization
We will introduce a non-destructive method for garnet characterization. In this application note, we used a HORIBA XGT-9000 X-ray Analytical Microscope (micro-XRF) with a 100 μm ultra-high intensity probe to get the elemental composition information of a small garnet stone. Thanks to the micro-spot with high intensity, we could detect the key elements of the small garnet stone just in 30 seconds, and the obtained elemental composition suggested that the garnet stone had similar composition to the chrome poor pyrope from Monte Suímo, Portugal.
The Power of Micro-XRF in Gemology – Part 2: Non-destructive Screening to Find an Imitated Emerald Product
The Power of Micro-XRF in Gemology – Part 2: Non-destructive Screening to Find an Imitated Emerald Product
We introduce a non-destructive screening method for gemstone counterfeit analysis using a HORIBA XGT-9000 X-ray Analytical Microscope. We analyzed two emeralds, and without any sample destruction, we could successfully determine that one of them was an imitated product made of a green-colored glass.
Glass-Filled Ruby Characterization with the XGT-9000, HORIBA’s new micro-XRF
Glass-Filled Ruby Characterization with the XGT-9000, HORIBA’s new micro-XRF
Gemstones for jewelry are treated by heating, irradiation, or filling of cracks to make them flawless. We performed imaging analyses using an XGT-9000 X-ray Analytical Microscope on a ruby provided by Mineralab. The transmission X-ray imaging revealed that the ruby included several internal defects, and the fluorescent X-ray imaging revealed that the ruby surface was treated by filling with Pb, Mg and Si which are representative of lead glass.
Plant science - Inorganic element imaging on a leaf using micro-XRF
Plant science - Inorganic element imaging on a leaf using micro-XRF
A wide range of elements are present in plants. Some elements exist to play important roles as plant nutrients or enzymes, and some elements accumulate unexpectedly due to environmental pollution. While it is important to understand the bulk concentrations of individual elements from a nutritional and ecotoxicological perspective, the distribution of elements is also important for a better understanding of the mechanisms of metabolism and uptake in plants.
Inorganic nutrient distribution imaging in a single rice grain using micro-XRF
Inorganic nutrient distribution imaging in a single rice grain using micro-XRF
Rice mainly consists of starch, but it also contains inorganic nutrients, and it has been reported that different inorganic elements have different distributions in a rice grain. We carried out elemental distribution imaging of inorganic nutrients with the HORIBA XGT-9000 X-ray analytical microscope. The result successfully visualized that P and K were accumulated in specific areas of a rice grain, while S and Zn were uniformly distributed within a rice grain.
Non-destructive thickness and composition analysis of NiP/Au plating on Cu contacts using micro-XRF
Non-destructive thickness and composition analysis of NiP/Au plating on Cu contacts using micro-XRF
We carried out plating thickness and composition analysis on dual-layer NiP/Au plating on Cu contacts on a flexible printed circuit using a HORIBA X-ray analytical microscope. We successfully detected Au of ultra-thin layer without any sample preparation. The thickness results of Au and NiP plating were consistent with the provided values and with good repeatability.
Pigment identification of an old Japanese flag “Hinomaru” using micro-XRF and Raman microscopy
Pigment identification of an old Japanese flag “Hinomaru” using micro-XRF and Raman microscopy
This application note introduces pigment identification using micro-XRF and Raman microscopy on a Japanese flag “Hinomaru”, which is presumed to be the oldest and designed by an ancient Japanese Emperor Go-Daigo. The two spectroscopic analyses identified that the red pigment used on the flag matched the cinnabar ore (Mercury(II) sulfide) mined from the Mine near the place where the Emperor lived.
Spectroscopic Analysis Explains the Mystery of Dragonfly Eye Beads
Spectroscopic Analysis Explains the Mystery of Dragonfly Eye Beads
Spectroscopic analysis can reveal the origin of cultural heritages and the historical background at the time. This application note introduces research of a dragonfly eye bead found in a tomb in China. Using Raman spectroscopy and X-ray analytical microscopy, the bead was found to be from the Eastern Mediterranean region and the result suggested China had cultural and economic exchanges with them during that era.
Optical Micro-spectroscopies on a Path to Identify the Source of Life
Optical Micro-spectroscopies on a Path to Identify the Source of Life
In this article, we present how our Raman and X-Ray Fluorescence microscopies can be combined to shed some light on the origins of the universe. We show some examples on a meteorite piece and on water inclusion in quartz matrix.
Non-destructive Failure Analysis on Electronic Components Using the XGT-9000
Non-destructive Failure Analysis on Electronic Components Using the XGT-9000
μ-XRF is a non-destructive analytical technique which can inspect defects, even non-visible ones, inside a sample because of the high penetration of X-rays. This application note introduces failure analysis to detect ion migration, voids, and foreign matter on electronics using the XGT-9000, with key features of the vertical irradiation of a 10 μm probe and the simultaneous imaging of fluorescent X-rays and transmission X-rays.
Multiple Characterizations of a Blister Pack Using the XGT-9000
Multiple Characterizations of a Blister Pack Using the XGT-9000
The XGT-9000 is HORIBA’s new X-ray microscope. Its analytical versatility allows, multiple characterizations to be performed on a blister pack, from mapping of the full pack to particle size measurements of the capsule content.
Characterization of Pyrite Inclusions in Lapis Lazuli Using X-ray Fluorescence Micro-imaging
Characterization of Pyrite Inclusions in Lapis Lazuli Using X-ray Fluorescence Micro-imaging
Lapis lazuli is a deep-blue metamorphic rock used as a semiprecious stone which contains inclusions that can impact its value. Pyrite impurities and major elements distribution are studied with the XGT-9000, HORIBA’s new X-ray microscope.
Elemental Distribution Imaging on Edible Insects Using Micro-XRF
Elemental Distribution Imaging on Edible Insects Using Micro-XRF
Edible insects have received attention as a possible solution as a supplemental source to reduce food insecurity because of their nutritional benefits such as protein, fat, and minerals. Micro-XRF can be used to understand the elemental distributions in insects non-destructively. In this application note, we carried out elemental map imaging on edible crickets using a HORIBA XGT-9000 X-ray analytical microscope and revealed the rich source of zinc in their jaws.
Foreign Matter Analysis in Food using the XGT 9000
Foreign Matter Analysis in Food using the XGT 9000
This application note introduces foreign matter analysis in food products using the XGT 9000. There are three analyses as follows: Foreign particles on an oily salami, foreign matter inside a laminated ham and sausage, and a fly found in a drink product.
The non-destructive identification of black ink in a tempered document using XGT-9000
The non-destructive identification of black ink in a tempered document using XGT-9000
μ-XRF is one of the powerful non-destructive analytical technique in forensic science application. Thanks to the elemental mapping and the spectrum search function, XGT-9000 enables to reveal intentional alternation and identify the ink used on a document.
QC of Semiconductors which Feature Thin and Narrow Patterns
QC of Semiconductors which Feature Thin and Narrow Patterns
The combination of microbeam and thickness measurement capability makes the XGT-9000 a useful tool for the QC of semiconductors, which feature thin and narrow patterns. Thickness sensitivity depends on elements traced, but can be at the Angstrom level.
QC, Counterfeit Products, Presence of Foreign Materials
QC, Counterfeit Products, Presence of Foreign Materials
X-ray Fluorescence photons can be partially absorbed by the encapsulated material and will not show in the spectrum. The X-ray transmission image provides a complete picture.
Foreign Particle Analysis on a Separator Film of Lithium-ion Battery
Foreign Particle Analysis on a Separator Film of Lithium-ion Battery
The XGT-9000 can detect and determine the composition of foreign particles, and therefore track the source of contamination.
Failure analysis, RoHS testing of Electronics
Failure analysis, RoHS testing of Electronics
Simultaneous imaging of transmission X-rays and fluorescent X-rays is effective to find defects inside electronic components.
Surface Analysis of Corrosion/Contamination for Material Science
Surface Analysis of Corrosion/Contamination for Material Science
Elemental distribution is crucial for material science. The XGT-9000 Series provides this information non-destructively.
Elemental Composition Identification of Geoscience/Mineralogical Samples
Elemental Composition Identification of Geoscience/Mineralogical Samples
The XGT-9000 Series can be equipped with various probes and spot sizes providing comprehensive and detailed understanding of geological and mineral samples.
Trace Evidence Identification, Fake Product Identification of Forensic Samples
Trace Evidence Identification, Fake Product Identification of Forensic Samples
The XGT-9000 Series can be used for identification of trace evidences such as collected gunshot residues, glass fragments, and fibers with sizes even down to tens of micron.
Metabolism Investigation of Biological Samples
Metabolism Investigation of Biological Samples
The XGT-9000 Series can be used for identification of trace evidences such as collected gunshot residues, glass fragments, and fibers with sizes even down to tens of micron.
Gun Shot Residue analysis using X-ray fluorescence micro-analysis
Micro-XRF analysis of gun shot residues allows individual microscopic particles to be characterized for elemental composition. In addition, automated element imaging provides high spatial resolution element distribution maps, allowing particle shapes and sizes to be accurately analyzed.
X-ray micro-analysis for pearl characterisation in forensic science
X-ray micro-analysis for pearl characterisation in forensic science
Simultaneous XRF and transmission x-ray imaging provides valuable insight into the composition and structure of pearls. Such information is vital for customs officials, who can quickly determine whether pearls are natural, cultured or imitation.
Fingerprint imaging with micro-XRF
Fingerprint imaging with micro-XRF
High spatial resolution elemental mapping experiments are demonstrated to provide a useful method of fingerprint analysis in situations where traditional methods struggle. Fingerprints on glossy paper and finely woven fabrics have been chemically treated, and subsequently imaged.
Micro-XRF analysis for lead contamination in toys
Micro-XRF analysis for lead contamination in toys
A plastic toy is analysed for the presence of lead within its many components. Spot analysis shows concentrations of this harmful element can reach as high as 0.3%. XRF imaging allows its distribution across the toy to be quickly characterised.
Fast thickness measurement of thin metal coatings by Micro-XRF
Fast thickness measurement of thin metal coatings by Micro-XRF
The penetrating nature of EDXRF analysis allows multi-layered samples to be characterised with a single measurement. With high spatial resolution even microscopic features such as bonding pads on circuit boards can be interrogated for composition and layer thickness.
Quality control and defect analysis in the electronics industry using micro-XRF
Quality control and defect analysis in the electronics industry using micro-XRF
Troubleshooting and defect analyses of components embedded within opaque resins are described, on both individual components and complete circuit boards. Quantitative analysis to the ppm level is ideally suited for ensuring compliance to the WEEE/RoHS directives.
Micro-XRF analysis for the Electronics Industry
Micro-XRF analysis for the Electronics Industry
The combination of the XGT-5000’s ground breaking spatial resolution and sensitivity means it is the instrument of choice for fast analysis of electronic components, whether for analysis of restricted harmful elements (the WEEE/RoHS ‘lead free’ legislation), trouble shooting, or R&D.
Elemental analysis of single rice grains using XRF micro-analysis
Elemental analysis of single rice grains using XRF micro-analysis
Individual rice grains are analyzed by micro-XRF to examine the effect of grain polishing. The concentration of mineral elemnts found on a grain can be related to the degree of polish.
Elemental micro-analysis of leaves using EDXRF
Elemental micro-analysis of leaves using EDXRF
Calcium micro-nodules are identified within mulberry leaves, and XRF mapped imaging provides a correlation between nodule concentration and leaf age. In a seperate study, the uptake of heavy element pollutants by plants is investigated, with high resolution images quickly acquired to show the distribution of lead through the leaf.
Biological applications of XRF microscopy
Biological applications of XRF microscopy
The effect of zinc on gastric ulcer healing has been investigated - mapped imaging of tissue samples shows evidence of zinc accumulation within the ulcerated tissue. In a separate study a fish otolith ('ear bone') has been analysed to reveal its heterogeneous elemental composition and physical structure.
Micro-XRF for non destructive analysis of museum and archaeological objects
Micro-XRF for non destructive analysis of museum and archaeological objects
Pigments used in an ancient Nepalese manuscript have been analysed and assigned and an ancient glass burial ornament has been probed to identify the specific colouring additives used.

Požadavek na informaci

Máte nějaké dotazy nebo požadavky? Pomocí tohoto formuláře kontaktujte naše specialisty.

* Tato pole jsou povinná.

Příslušenství výrobku

XD-100
XD-100

Particle Disperser

Related products

GD-Profiler 2™
GD-Profiler 2™

Pulsed-RF Glow Discharge Optical Emission Spectrometer

LabRAM Odyssey
LabRAM Odyssey

Confocal Raman & High-Resolution Spectrometer

LabRAM Soleil
LabRAM Soleil

Raman Spectroscope - Automated Imaging Microscope

MESA-50
MESA-50

X-Ray Fluorescence Analyzer

MESA-50K
MESA-50K

X-Ray Fluorescence Analyzer

XGT-9000SL
XGT-9000SL

X-ray Analytical Microscope
with a Super Large Chamber

XploRA™ PLUS
XploRA™ PLUS

MicroRaman Spectrometer - Confocal Raman Microscope

AP-370 Series
AP-370 Series

Air Pollution Monitor

APDA-372
APDA-372

Ambient Dust Monitor

AQMS
AQMS

Ambient Air Quality Monitoring System

Auto SE
Auto SE

Spectroscopic Ellipsometer for Simple Thin Film Measurement

Auto SE Accessories
Auto SE Accessories

Customize your instrument

Auto Soft
Auto Soft

Intuitive Auto-Soft Interface for the Auto SE and Smart SE

DataOverlay
DataOverlay

Hybrid Chemical and Video Image Display

DeltaPsi2 Software
DeltaPsi2 Software

A Platform for HORIBA Scientific Ellipsometers

GD-Profiler 2™
GD-Profiler 2™

Pulsed-RF Glow Discharge Optical Emission Spectrometer

GDOES Accessories
GDOES Accessories

Accessories for samples with various shapes, sizes and properties

GDOES Software
GDOES Software

Quantum and Image

H-1 Series
H-1 Series

Field-installation type water quality measuring instruments

ICP Neo
ICP Neo

ICP Software

ICP-OES
ICP-OES

Complete your ICP-OES Spectrometer for your specific needs

Image Enhancement
Image Enhancement

Emphasize Raman and Optical Images

LabRAM Odyssey Nano
LabRAM Odyssey Nano

AFM-Raman for physical and chemical imaging

LabRAM Soleil
LabRAM Soleil

Raman Spectroscope - Automated Imaging Microscope

LabRAM Soleil Nano
LabRAM Soleil Nano

Real-time and Direct Correlative Nanoscopy

LabSpec 6: Validated performance
LabSpec 6: Validated performance

LabSpec 6 is a validated software

LEM Series
LEM Series

Camera Endpoint Monitor based on Real Time Laser Interferometry

MESA-50
MESA-50

X-Ray Fluorescence Analyzer

MESA-50K
MESA-50K

X-Ray Fluorescence Analyzer

Methods
Methods

Recall settings, and automate processes

MEXA-2000SPCS series
MEXA-2000SPCS series

Solid Particle Counting System

Multivariate Analysis
Multivariate Analysis

Data analysis for complex data sets

OBS-ONE PM unit
OBS-ONE PM unit

On-board Emissions Measurement System

OneClick
OneClick

Fast and easy Raman acquisition

OpenPleX
OpenPleX

Manual label-free molecular interaction analysis machine Flexible Research Platform

Script and ActiveX
Script and ActiveX

Customize with VBS

Smart SE
Smart SE

Powerful and Cost Effective Spectroscopic Ellipsometer

TFH-01/47
TFH-01/47

PTFE Filter/TFH membrane

Ultima Expert
Ultima Expert

High resolution, high sensitivity and high stability ICP-OES

Ultima Expert LT
Ultima Expert LT

Affordable high performance ICP-OES

User Accounts
User Accounts

Password protected user access control

UVISEL Plus
UVISEL Plus

Spectroscopic Ellipsometer from FUV to NIR: 190 to 2100 nm

XGT-9000SL
XGT-9000SL

X-ray Analytical Microscope
with a Super Large Chamber

XploRA Nano
XploRA Nano

AFM-Raman for Physical and Chemical imaging

XploRA™ PLUS
XploRA™ PLUS

MicroRaman Spectrometer - Confocal Raman Microscope

MESA-50
MESA-50

X-Ray Fluorescence Analyzer

MESA-50K
MESA-50K

X-Ray Fluorescence Analyzer

MESA-7220V2
MESA-7220V2

X-ray Fluorescence Sulfur/Chlorine-in-oil Analyzer

SLFA-20
SLFA-20

X-ray Fluorescence Sulfur-in-Oil Analyzer

SLFA-2100/2800
SLFA-2100/2800

X-ray Fluorescence Sulfur-in-Oil Analyzers

SLFA-60
SLFA-60

X-ray Fluorescence Sulfur-in-Oil Analyzer

SLFA-6000
SLFA-6000

X-ray Fluorescence Sulfur-in-Oil Analyzer

X-5000*
X-5000*

Energy Dispersive X-ray Fluorescence Analyzer

XGT-9000SL
XGT-9000SL

X-ray Analytical Microscope
with a Super Large Chamber

Corporate