LEM Series

LEM Series Camera Endpoint Monitor based on Real Time Laser Interferometry
LEM Series Camera Endpoint Monitor based on Real Time Laser Interferometry, side view

Camera Endpoint Monitor based on Real Time Laser Interferometry

Our Real Time Interferometric Process Monitor provides high precision detection of film thickness and trench depth during the etching/deposition process.
Depending on applications, LEM camera includes a 670 or 905 or 980 nm laser and when mounted on any dry etch/deposition process chamber with a direct top view of the wafer this generates a small laser spot on the sample surface.

Interference occurs when monochromatic light hits the sample surface, resulting in different optical path lengths due to film thickness and height variations in the film.
This allows the etch/deposition rate and thus thickness to be monitored in real time, also fringes counting or more complex analysis, providing enhanced process control Endpoint for a wide variety of processes. Additionally interfaces can be detected by their change in reflectivity.

Segment: Semiconductor
Produktionsfirma: HORIBA France SAS

General features

Based on the interferometry technique, LEM camera is ideally suited to etch/deposition rate monitoring, Fringes counting and endpoint detection, providing high precision detection of film thickness and trench depth and also interfaces.
The LEM camera can be mounted on any process chamber with direct top view of the wafer and provides a real-time digital CCD image of the sample surface making spot positioning simple.


Figure 1: Camera image makes spot positioning simple

General features

  • Multi-Configurations to fit your needs
    LEM Camera is available with:
    • 2 configurations :
      • LEM Sensor
        • simple analog output,
        • ideal for OEMs (sensor only)
      • LEM-CT complete instrument
        • includes full computer control (Sigma_P software) powered by an easy to use recipe editor for advanced process monitoring. Ideal for OEMs and process development in industrial R&D environments.
    • 3 types of lasers compatible with a broad range of films including SiN, SiO2, GaAs, InP, AlGaAs, GaN… LEM camera uses visible (670 nm) or NIR laser (905, 980 nm) depending on applications
    • XY manual or motorized stage
    • Perpendicularity Tilt management on the LEM sock (default) or using an easier tilt function (optional)
       
  • Sensor head: Camera with CCD imaging
    A large objective lens to wafer distance attachment range of 200 mm to 800 mm. The use of lasers enables a spot diameter as small as 20 µm to 100 µm. A compact, self-contained amplifier design that allows simple monitoring of 0 V to 10 V outputs with only a camera if connected to devices such as a data logger.
    This system calculates the etching/deposition speed of the monitored area by monitoring the interference intensity based on the cycle, leading to detection of the end-point from the prescribed film thickness and trench depth.
    Based on this theory, this system is extremely stable and can be used with complex multi-layer films.
     
  • Frame grabber
    The frame grabber permits to optimize camera setup position and also to set the spot on the right location for process monitoring.
     
  • Traditional interference wave type
    The horizontal axe represents time. An interference cycle is generated with respect to the etching depth as the etching process progresses. The amount of etching during one cycle is displayed as Thickness/Depth = λ (laser wavelength) / 2n (refractive index of etching film).

     
  • Sigma_P for real-Time Monitoring and Endpoint
    Sigma_P© software allows rapidly configuring recipe and then creating robust endpoint detection:
    • Using Windows 10 based Software platform, intuitive user interaction permits to deal with Laser wavelength along time.
    • A simple Recipe Editor allows the user to build efficient recipes, signal arithmetic and filtering, plus Endpoint condition(s) and decision(s), using a Formula Editor, with help online integrated.
    • Up to 8 curves can be displayed on the same screen to monitor Signal, derivative plus specific Interferometric Method variables & Endpoint at the same time.
       
  • Recipe Management
    Unified concept permits to setup recipes in a fluent and user-friendly Excel-like Recipe Editor.
    With Sigma_P software expansion settings feature, many compatible algorithms for special signal detection and detection of signals with poor S/N ratios are included and can always be expanded.
     
  • SQL Management
    Chamber Database, Tool Databases are embedded close to the sensor and accessible online, by operator, by recipes, by statisticians, by APC servers, by distant process engineer office.
     
  • Reprocessing Manager to playback raw data
    To allow instant replay of mathematical treatment for instrumentation optimization but also scripted automatic reprocessing of multiple data runs for process validation, APC extensions, parametric studies.
    This data can also be sent directly to HORIBA for analysis and optimization.
     
  • Active Recipe Manager
    Extensions allow data exchange Run to Run, Wafer to Wafer, Lot to Lot, Chamber to Chamber for enhanced production control
     
  • Statistical Process Control in situ
    Statistic engine allowing recipes to self-compute production metrics, default values, triggered by direct user but also from host or engineer desk

     
  • Automation Data Link Manager
    Design flexibility to interface chambers, equipment mainframes, fab hosts, fab servers using middlewares: Remote Control (RS 232, TCP/IP, PIO), SECS, HSMS, Fab LAN, Fab e-mailing, and other protocols
     
  • Advanced Algorithm Manager
    Combination of powerful external math tools to the native recipe math formula editor and in situ math calculator
     
  • Kinetic Modeler for Interferometric engineering
    Theoretical Interferometric curve according to piling structure (each layer is characterized by its material, thickness, and Etch/deposition rate) and Wavelength used. It permits to obtain reference curve before real engineering on wafers

     
  • Options
    • XY stage 2 models: Manual or motorized (with Controller and Joystick)
    • Manual Tilt to ease perpendicularity setup (FA labs)
    • PC Controller 2 models: Standard or High Grade
       
  • Attachment conditions
    A measurement view port of ø20 or greater will be required in a vertical direction across the wafer.

 

LEM-CT Applications

Generality

Regarding Interferometry (Laser or Multiwavelength using broad Flash Lamp source), endpoint detection mostly consists in three steps:

  1. selection of the relevant wavelengths that carry the information about the transition (interface detection) or thickness/depth/remaining thickness
  2. a real-time data filtering (in the broad sense) and the construction of an endpoint indicator,
  3. a series of tests to confront the algorithm to the reality of production fluctuations.

To address these new requirements, HORIBA has developed a unique generation of Sensor (Hardware and Software), based on interferometry, for Endpoint, fault detection and Advanced Process Control (APC) adaptable to all etchers, to help engineers and Fab’s to manage actual and future products and technologies.

Interferometry: INT

LEM-CT for Real-Time accurate and reliable Thickness/depth information

Besides plasma, Sample information is also complex. LEM-CT (as EV 2.0 INT),mounted on any process chamber with direct top view of the wafer,allows to obtain local information on optically semi-transparent, multi-layers structure. This allows the etch rate and thus etched thickness to be monitored in real time, providing enhanced process control for a wide variety of processes. Additionally, interfaces can be detected by their change in reflectivity.

Based on the interferometry technique, LEM-CT is ideally suited to etch/deposition rate monitoring and endpoint detection, providing high precision detection of Fringes counting, film thickness, trench depth, interfaces…

  • Interference occurs when monochromatic light hits the sample surface, resulting in different optical path lengths due to film thickness and height variations in the film.
  • HORIBA is providing WIN10 PRO, 64bits PC with HORIBA Software dedicated to interferometric monitoring and endpoint

LEM

System outlineLEM camera consists of a compact interference measurement section that includes the laser source, light receiver, and optical components, as well as the illumination and CCD imaging camera, allowing monitoring of any area of the wafer surface using microscopic images.
Light sourceLaser diode
Light source wavelengths670 nm, 905 nm, 980 nm
Magnification50x (G50) or 120x (G120)
Spot diameter20 μm to 100 μm,
depending on camera to wafer distance
DetectorPin-photo diode
Camera Dimensions65 (W) × 160 (H) × 100 (D) mm
2.6 (W) × 6.3 (H) × 3.9 (D) in
(camera only, excluding stage)
Camera mass1.2 kg, 2.6 lb
RemoteLEM-CT only may be connected to any host through digital Link with RJ 45 connector: TCP/IP.
An optional SEQ70 box contains an interface board to provide galvanic isolation between the host controller hardware of the HOST / Tool from the box main electronics
Label onDescriptionPlug type
RemotePIO, RS, analog 0-5VFemale DB25
This permits to communicate by logic wiring, fast, deterministic with full optocouplers and power spikes isolation, frequently found in industrial fab environment
LEM SIGNAL BOXLEM-CT only is provided with a LEM Signal BOX connected in USB on the PC to collect:
  • Frame grabber
  • LEM signal
CertificationCE


Windows 10 PRO, 64bits PC Controller

DC Power Supply24V
SSD256 Go, 2,5” SATAIII
DesignAluminum Frame, fanless design
Anti-vibration and shock resistant
ConnectionRS-232/422/485
RS-232
USB 3.0 on Standard
2x RJ45 Gb
VGA, HDMI
Standard PC (Default)
CPU64bits, Intel® Pentium® N4200, 2.5 GHz
RAM4Go DDR3
Controller Dimensions197 (W) x 110 (D) x 55 (H) mm
Controller Mass2 kg
High Grade PC (Optional)
CPU64bits, Intel® Core™ i7-7700T 2,9 GHz
RAM8Go DDR4 2133MHz
Controller Dimensions264 (W) x 96.4 (D) x 186.2 (H) mm
Controller Mass4.5 kg


Option

Manual XY stage
Manual XY stage Travel range±8.0mm
Manual XY Stage dimensions120 (W) × 120 (H) × 87 (D) mm
4.7 (W) x 4.7 (H) x 3.4 (D) in
Manual XY Stage Mass1.3 kg, 2.8 lb
Motorized XY stage
Motorized XY stage Travel range±12.5mm
Motorized Stage dimensions167 (W) × 117 (H) × 112 (D) mm
6.6 (W) × 4.6 (H) × 4.4 (D) in
Motorized Stage Mass2.6 kg, 5.6 lb
Software
  • LEM-CT: Sigma_P, Kinetic Modeler for Engineering & Production
  • LEM: Analog sensor, no software
Accessories for SEQ70-PIO box and PC
  • Direct connection on tool 24 VDC
    • <1A, 20W for SEQ70 box
    • <4A, 80W for PC
  • External power supply AC 100-240V->24VDC, 5A
  • HDMI Screen, Mouse, keyboard
Various Configurations
  • EV 2.0 + LEM camera for dual-sensor monitoring on one chamber


Environmental

Operating Temp/humidityTemp:18℃~50℃
Humidity:0~70%RH (No dew condensation)
Transportation Temp/humidityTemp:-20℃~55℃
Humidity:0~70%RH (No dew condensation)
Metal Organic Chemical Vapor Deposition (MOCVD)
Metal Organic Chemical Vapor Deposition (MOCVD)
The MOCVD process is a recognized controllable synthesis method that uses a variety of precursors like Trimethyl Indium (TMI) and Diethyl Zinc (DEZ) that require a robust delivery method to ensure process repeatability and high yield.

Informationsanfrage

Sie haben Fragen oder Wünsche? Nutzen Sie dieses Formular, um mit unseren Spezialisten in Kontakt zu treten.

* Diese Felder sind Pflichtfelder.

Related products

Auto SE
Auto SE

Spectroscopic Ellipsometer for Simple Thin Film Measurement

Auto Soft
Auto Soft

Intuitive Auto-Soft Interface for the Auto SE and Smart SE

DeltaPsi2 Software
DeltaPsi2 Software

A Platform for HORIBA Scientific Ellipsometers

MESA-50
MESA-50

X-Ray Fluorescence Analyzer

MESA-50K
MESA-50K

X-Ray Fluorescence Analyzer

Methods
Methods

Recall settings, and automate processes

Script and ActiveX
Script and ActiveX

Customize with VBS

Smart SE
Smart SE

Powerful and Cost Effective Spectroscopic Ellipsometer

UVISEL Plus
UVISEL Plus

Spectroscopic Ellipsometer from FUV to NIR: 190 to 2100 nm

XGT-9000
XGT-9000

X-ray Analytical Microscope (Micro-XRF)

XGT-9000SL
XGT-9000SL

X-ray Analytical Microscope
with a Super Large Chamber