Hydrogen Production

For gasification and reforming processes of hydrogen raw materials, HORIBA globally offers gas measurement for process monitoring to measure hydrogen purity and impurities, engineering for plant integration, and analytical technologies for catalyst materials used in hydrogen separation, recovery, and purification processes.

In addition to water electrolysis, there are several other ways to "produce" hydrogen:
1) Steam reforming: fossil fuels such as oil and gas are reacted with water vapor at high temperatures to produce hydrogen-containing gas;
2) By-product hydrogen: produced as a byproduct of coke production at steel mills by steaming coal, or from caustic soda; and
3) Biomass hydrogen: produced by gasifying and reforming biomass, which are organic resources derived from plants and animals, etc.

 

Table of Contents

Challenges in Hydrogen Production

In order to produce higher purity hydrogen in larger quantities and at lower cost, there is a constant need to evolve the production process technology and improve the adsorption and regeneration performance of the recovery agent by monitoring the entire production process and analyzing the catalysts and materials used in the process.

Among the hydrogen production technologies, steam reforming is widely used as the cheapest and most efficient way to produce large amounts of hydrogen. However, it is also called "gray hydrogen" because it emits CO2, and it is essential to reduce the ratio of this gray hydrogen in order to achieve carbon neutrality.

In any of these issues, the key words for the use of resources are "high efficiency" and "low emission". We provide high-precision measurement solutions based on gas monitoring in manufacturing processes.

Our Unique Measurement & Analysis Technology

Monitoring the concentration of impurity gases in high-purity hydrogen
Monitoring the Concentration of Impurity Gases in High-Purity Hydrogen

Hydrogen production in various industries involves a gas separation, recovery, and purification process to remove impurity gases (CO, CO2, CH4, SO2), and then refining and producing hydrogen to a level consistent with each application.

To confirm that the impurity gas has reached this level of hydrogen, trace gases in the hydrogen are measured and monitored in real time.

Monitoring degradation of PSA packing material (adsorbent)  Process monitoring of PSA and other processes during hydrogen purification
Monitoring Degradation of PSA Packing Material (Adsorbent)

Among the hydrogen produced, the demand for hydrogen for fuel cell applications is particularly on the rise. Among other things, hydrogen for Fuel Cell Electric Vehicle (FCEV)s is required by ISO to be 99.97% or higher, and each impurity concentration standard is set. In order to ensure this purity, it is necessary to increase the hydrogen purity using the Pressure Swing Adsorption (PSA) method.

We provide a solution by measuring the concentration of impurities in hydrogen that contributes to monitoring the deterioration of adsorbents and other materials used in PSA.

Trace Gas Monitor GA-370

Monitoring of Sulfur Dioxide Gas in the Desulfurization Process

In the production of hydrogen from fossil fuels, it is necessary to desulfurize sulfur dioxide (SO2) sufficiently before entering the separation, recovery, and refining processes in order to reduce equipment failure and performance degradation and to ensure stable production.
Whether or not the gas has been desulfurized reliably can be confirmed by measuring and monitoring the gas.

Multi-Component Gas Analyzer VA-5000

Stack Gas Analysis System ENDA-5000 series

Monitoring Hydrogen Gas Concentration in By-Product Gas

The hydrogen gas concentration is measured and monitored to ensure efficient operation of the hydrogen in the large amount of byproduct gas generated in steel mills and other facilities.

Explosion-proof Gas Analyzer 51 series


Related Information on Hydrogen Energy

Request for Information

Do you have any questions or requests? Use this form to contact our specialists.