Electrical Equipment

We carried out plating thickness and composition analysis on dual-layer NiP/Au plating on Cu contacts on a flexible printed circuit using a HORIBA X-ray analytical microscope. We successfully detected Au of ultra-thin layer without any sample preparation. The thickness results of Au and NiP plating were consistent with the provided values and with good repeatability.

Our XGT-9000SL allows failure analysis at a microscopic level on a large sample, non-destructively, thanks to its large chamber capacity and its microprobes.

μ-XRF is a non-destructive analytical technique which can inspect defects, even non-visible ones, inside a sample because of the high penetration of X-rays. This application note introduces failure analysis to detect ion migration, voids, and foreign matter on electronics using the XGT-9000, with key features of the vertical irradiation of a 10 μm probe and the simultaneous imaging of fluorescent X-rays and transmission X-rays.

The penetrating nature of EDXRF analysis allows multi-layered samples to be characterised with a single measurement. With high spatial resolution even microscopic features such as bonding pads on circuit boards can be interrogated for composition and layer thickness.

Troubleshooting and defect analyses of components embedded within opaque resins are described, on both individual components and complete circuit boards. Quantitative analysis to the ppm level is ideally suited for ensuring compliance to the WEEE/RoHS directives.

The combination of the XGT-5000’s ground breaking spatial resolution and sensitivity means it is the instrument of choice for fast analysis of electronic components, whether for analysis of restricted harmful elements (the WEEE/RoHS ‘lead free’ legislation), trouble shooting, or R&D.

Optical Fiber Manufacturing Process

Internal temperature management for household appliances

Temperature management for air conditioners

Check heating value of electronic devices

Informationsanfrage

Sie haben Fragen oder Wünsche? Nutzen Sie dieses Formular, um mit unseren Spezialisten in Kontakt zu treten.

Vorname

Nachname *

Firma oder Organisation *

Postleitzahl *

Ort

Land *

Bundesland

E-Mail-Adresse *

Telefonnummer

HORIBA Abteilung

Ihre Nachricht *

Ich habe die HORIBA Datenschutzbestimmungen zur Kenntnis genommen.

Related Products

XGT-9000SL

mehr XGT-9000SL

X-ray Analytical Microscope Super Large Chamber Model

XGT-9000

mehr XGT-9000

X-ray Analytical Microscope (Micro-XRF)

IT-545 Series

mehr IT-545 Series

High-Accuracy Infrared Thermometers [Handheld type]

LE Series

mehr LE Series

Large Flow Liquid Source Vaporization Control System

LU-4000 Series

mehr LU-4000 Series

POCl3 Auto Refill System

Smart SE

mehr Smart SE

Powerful and Cost Effective Spectroscopic Ellipsometer

Auto SE

mehr Auto SE

Spectroscopic Ellipsometer for Simple Thin Film Measurement

UVISEL Plus

mehr UVISEL Plus

Spectroscopic Ellipsometer from FUV to NIR: 190 to 2100 nm

UVISEL 2 VUV

mehr UVISEL 2 VUV

A versatile spectroscopic ellipsometer covering a large range from VUV to NIR

MV-2000

mehr MV-2000

Mixed Injection System Liquid Vaporizer

IR-300

mehr IR-300

Vapor Concentration Monitor

SEC-N100 Series

mehr SEC-N100 Series

Digital Mass Flow Controller

SEC-8000 F/D/E Series

mehr SEC-8000 F/D/E Series

High Temperature Digital Mass Flow Controller

Micropole System

mehr Micropole System

Residual Gas Analyzer

LF-F/LV-F Series

mehr LF-F/LV-F Series

Digital Liquid Mass Flow Meters / Controllers

LSC series

mehr LSC series

Compact Baking System

LU Series

mehr LU Series

Liquid Auto Refill System

MI-1000/MV-1000

mehr MI-1000/MV-1000

Mixed Injection System Liquid Vaporizers

VC Series

mehr VC Series

Direct Liquid Injection System

SEC-Z500X Series

mehr SEC-Z500X Series

Multi Range/Multi Gas Digital Mass Flow Controller

XGT-7200

mehr XGT-7200

X-ray Analytical Microscope

MESA-50K

mehr MESA-50K

X-Ray Fluorescence Analyzer

MESA-50

mehr MESA-50

X-Ray Fluorescence Analyzer