Steady State and Lifetime Nanotechnology EEM Spectrofluorometer
The Nanolog® series of spectrofluorometers are specifically designed for research in nanotechnology and the frontiers of nanomaterials. A complete spectrum can be scanned as fast as a few milliseconds, and a full excitation emission matrix scan can be taken in just seconds.
Based on the world-wide proven technology of the Fluorolog®, the Nanolog detects fluorescence in the near-IR from 800 to 1700 nm (optional multi-channel detection to 2 µm, single-channel detection to 3 µm), with visible and UV options possible. With the Nanolog comes specially designed software called Nanosizer, ideal for classifying SWNTs, Quantum Dots and performing energy transfer calculations. Saving custom experimental routines and instrument layouts has never been easier.
Nanosizer® - for Single‐Walled Carbon Nanotube Excitation‐Emission Map Simulation and Analysis
Nanosizer® in Origin® Pro 8 simplifies the process for simulation and analysis for single‐walled carbon nanotube excitation‐emission map simulation and analysis. Nanosizer is used with our Nanolog spectrofluorometers, which are specifically designed for research in nanotechnology and nanomaterials. Nanosizer comes with our patented double-convolution-integral algorithm specially designed for determining chirality and diameter of single-walled carbon nanotubes.
Nanosizer® lets you simulate excitation-emission maps of SWNT near-IR fluorescence to compare to your actual data. Using built-in or custom libraries, Nanosizer® rapidly assigns specific peaks to particular SWNT (n,m) structures, and even generates helical maps. Nanosizer® also greatly simplifies FRET studies of SWNT bundles, length-distribution analyses, and nanotube purification analyses. Nanosizer®even offers a platform suitable to support future ISO and ASTM standards for identification and purification of semiconducting SWNTs.
Perfect for FRET in SWNT Bundles, Length Distribution Analysis, and Purification applications
All-reflective optics Nanolog fluorescence spectrometer for perfect focus at all wavelengths from the UV to NIR
Note: The Sensitivity Specification listed below is the same with either the 450 W xenon or the 75 W xenon due to the enhanced collection efficiency of the PowerArc!
monochromator configuration (the 360 mm focal length double monochromator is recommended for the highest stray-light rejection and sensitivity).
Note:Specifications hereare basedon 180mm monochromator withstandard 1200grooves/mm gratingblazed at 330nm. Othergratings areavailable.
Resolution: 0.2 nm
0–1300 nm mechanical range; throughput based on grating’s blaze
Set automatically (0–30 nm single-grating, 0–15 nm double-grating)
All reflective optics sample compartment with single cuvette sample compartment tray for quick replacement with variety of optional sample hold- ers. Reference photodiode for excitation correction from 240–1000 nm. Optional front-face detection for highly turbid samples in solution. Optional T-Format detection to allow optional second emission-detection channel.
Emission Imaging Spectrograph
iHR320, for multi-channel acquisition, with triple-grating turret. Can be configured with one or two exit ports each for multi-channel or single channel detectors. Equipped with 150 grooves/mm grating for multi-channel detection of entire emission spectra with a single acquisition.
0–1500 nm mechanical range (using a 1200 grooves/mm grating and single channel detector)
Choice of up to two of the following:
Optional T-Side Emission Monochromator for Single Channel Detectors
Specifications are the same as excitation monochromator above1
Single Channel Detectors
Windows™-based FluorEssence™ software supplies all scanning, time-based, and accessory data acquisition plus complete control of all hardware, plus Nanosizer™ for fitting of single-walled carbon nanotube spectra to known library to determine chiralities and diameters.
Water Raman Signal-to-Noise Ratio of 15,000:1 (FSD method), 350 nm excitation, 5 nm bandpass, 1 second integration, no filters or averaging, with R928P photomultiplier tube.
The Nanolog 3-22-iHR, pictured here, is configured with a double-grating excitation and emission monochromator, plus an imaging spectrograph for a second emission channel.
Schematic shows a highly versatile Nanolog equipped with a 450 watt xenon lamp housing, double excitation monochromator for ultimate stray light rejection, T-Format sample compartment with multichannel iHR320 imaging spectrograph equipped with a Symphony NIR InGaAs array detector and a T-Side double emission monochromator with a PMT detector for ultimate sensitivity and stray light rejection.
Sie haben Fragen oder Wünsche? Nutzen Sie dieses Formular, um mit unseren Spezialisten in Kontakt zu treten. * Diese Felder sind Pflichtfelder.