HE-960CW

Panel-mount Type Conductivity Meter (Four-Wire Transmission, 2-channel)

HE-960CW connects conductivity sensor (ESH /FS Series) and measures conductivity and temperature in the sample water. It is ideal for the conductivity control of the purified water, pasteurized water, and water for injection that are used in the production of pharmaceuticals.
And we have developed a lineup of electric conductivity sensors that can be used in conjunction, from the conventional insertion type to the flow-through type with improved cleaning and sanitary properties.

Product name	Industrial 2-channel conductivity meter
Model	HE-960CW
Measurement method	Electrode type (2-electrode method)
Sensor input	2 channels (for concurrent measurement with sensors isolated each other)
Cell constant	0.01/cm, 0.1/cm, or 1.0/cm
Temperature sensor specifications	Platinum resistance 1000 Ω/0℃
Measuring range	Cell constant (/cm)		0.01 (ESD/ESL/ESH-001)	0.1 (ESD/ESL/ESH/FS-01)	1.0 (ESD/ESL/ESH-1)
	Conductivity range	(μS/cm)	2.000/20.00	2.000/20.00/200.0/2000*	200.0/2000
	Conductivity range	(mS/m)	0.2000/2.000	0.2000/2.000/20.00/200.0*	20.00/200.0
	TDS conversion	(mg/L)	2.000/20.00	2.000/20.00/200.0/2000*	200.0/2000
	*: Applicable for only sanitary sensor (FS-01 series)
	Temperature		0℃ to 100℃
	Desalination rate		0.0% to 100.0%
	Conductivity difference		Depends on measurement range of sensor 2 (CH2).
Repeatability	Conductivity display		Within ±0.5% of the full scale (in equivalent input) 2000 μS/cm and 200.0 mS/m ranges of FS-01: Within ±2% of the full scale
Repeatability	TDS conversion display		Within ±1.5% of the full scale (in equivalent input)
Linearity	Conductivity display		Within ±0.5% of the full scale (in equivalent input) 2000 μS/cm and 200.0 mS/m ranges of FS-01: Within ±2% of the full scale
Linearity	TDS conversion display		Within ±1.5% of the full scale (in equivalent input)
Display/output range	Conductivity		Measurement range
	Temperature		−30℃ to 160℃
	Desalination rate		0% to 100%
	Conductivity difference		Measurement range of sensor 2 (CH2)
Transmission output	Number of outputs: 4 4 mA to 20 mA DC/0 mA to 20 mA DC, input/output isolated type Maximum load resistance: 900 Ω Transmission output range: Freely selectable within the measurement range(Negative terminals of each transmission output channel are connected inside and thus have the same electric potential.)
Contact output	Number of outputs: 4 Alarm contact outputs (R1, R2, and R3) Contact type: relay contact, SPST (1a) Contact rating: 240 V AC, 3 A and 30 V DC, 3 A (resistance load) Contact function: selectable from the upper/lower limit action (ON/OFF control), delay, and hysteresis. Output contents: selectable from the selected measurement, USP assessment,anomaly alarm and maintenance. Alarm contact output (R4) Contact type: relay contact, SPDT (1c) Contact rating: 240 V AC, 3 A and 30 V DC, 3 A (resistance load) Contact function: selectable from the upper/lower limit action (ON/OFF control), delay, and hysteresis. Output contents: selectable from the selected measurement, USP assessment,anomaly alarm and maintenance. (However, R1 and R2, and R3 and R4 share the common contacts respectively.) Contact operation (operation between C and NO for R1 to R4) When selected measurement, USP assessment, or maintenance is selected in output contents: Contact point becomes “CLOSE” at control operation and “OPEN” at normal state (including power shutdown). When anomaly alarm is selected in output contents: Contact point becomes “CLOSE” at normal state and “OPEN” at anomaly state (including power shutdown). (When between C and NC is used with R4, contact point becomes reverses state with that of between C and NO.)
Communication output	RS-485 input/output
Calibration function	Conductivity: Based on the specified compensation coefficient for cell constant (parameter input). Temperature: Calibrated by comparing with the reference thermometer. TDS: Conversion using a user-defined coefficient value (0.30 to 1.00).
Transmission output hold feature	Previous value hold Optional value hold Selectable from the above (However, only the previous value hold is available in the maintenance mode.)
Self-diagnosis function	Sensor diagnosis Short-circuit and disconnection of the temperature sensor Out of the measurement range Converter error
Temperature compensation	Temperature characteristic of NaCl (reference temperature: 5℃ to 95℃) Arbitrary temperature coefficient entry. (reference temperature: 5℃ to 95℃: temperature coefficient: ±5%/℃) (In the deionized water area, however, the temperature compensation for deionized water is automatically performed in both NaCl and arbitrary temperature coefficient compensation settings.) No temperature compensation
Temperaturecompensated range	0℃ to 100℃
Ambient temperature	−5℃ to 55℃
Relative humidity	20% to 85% (without dew condensation)
Storage temperature	−25℃ to 65℃
Power supply	Rated voltage 100 V to 240 V AC, 50 Hz/60 Hz, 25 VA (maximum)
Structure	Indoor-use panel installation type Panel case: ABS, Terminal: PBT Panel: IP65 dust and water proof structure
Protective structure	Panel: IP65 (IEC60529, JIS C0920) Rear case: IP20, Terminal:IP00 Class II device (IEC61010-1) Pollution level 2 (IEC61010-1)
Conforming standards	CE Marking		EMC Directive: EN61326-1 Low Voltage Directive: EN61010-1 RoHS Directive: EN50581
Conforming standards	FCC Rule		FCC Part15
External dimensions	96 (W) mm × 96 (H) mm × 115 (D) mm Case depth: approx. 105 mm (when panel-mounted)
Mass	Approx. 550 g
Compatible sensors	Sensor type		Model	Cell constant (/cm)	Temperature coefficient of temperature sensor (ppm/℃)
	Insert type		ESD/ESL series	0.01, 0.1, 1.0	3750
	Insert type		ESH series	0.01, 0.1, 1.0	3850
	Sanitary insert type		ESD-01C-SN1.5	0.1	3750
	Sanitary insert type		ESH-01C-SN1.5	0.1	3850
	Sanitary flow-through type		FS-01C-SL series	0.1	3750
	Sanitary flow-through type		FS-01FC-SL series	0.1	3850

HE-960CW

Panel-mount Type Conductivity Meter (Four-Wire Transmission, 2-channel)

Measuring range

Request for Information

Voltammetry

Related products