EMIA-Step

탄소/황 분석기 (인덕션 퍼니스 타입)

고주파 유도로 타입의 "EMIA-Expert/Pro" 시리즈에 추가로 튜브형 전기 저항 가열로 타입의 "EMIA-Step"이 탄소/유황 분석기가 라인업에 새롭게 추가되었습니다. 고정밀, 고감도 분석이 가능하며, 가열 온도를 가변할 수 있어, 전량 분석은 물론 온도와 조건별로도 분리하여 분석이 가능합니다.

Segment: Scientific

Division: Carbon/Sulfur & Oxygen/Nitrogen/Hydrogen Analyzers

Manufacturing Company: HORIBA, Ltd.

Enables temperature control starting at a low temperature range

EMIA-Step provides good temperature stability from low to high temperatures. This broadens the application range to samples containing substances that are easily decomposed and burned at low temperatures.

<Temperature rise control from 300 °C to 900 °C>
You can easily see the decomposition combustion of organic matter and inorganic matter respectively.
New dust-filter provides easy maintenance capability

EMIA-Step adopted the proven dust-filter mechanism in the high frequency induction heating models. The filter unit collects the dust generated by combustion at high temperature. This prevents the dust from adhering to piping after the combustion furnace, and reduces adsorption of CO2 and SO2 gases by dust. This mechanism makes highly accurate and sensitive analyses possible.

＜Schematic of tubular electric resistance heating furnace＞
User-friendly software navigation functions facilitate the operation

<Analysis Navigation>
Recommends the best measurement flow and analysis conditions based on our experience.

<Troubleshooting Navigation>
Pinpoints the location automatically, and notifies the operator with the recovery procedure when any fault occurs.

<Maintenance Navigation>
Daily maintenance menus are listed and the videos and photos of the maintenance procedures are displayed.

Compliant standards

ASTM	Material to be analyzed	Title	Carbon	Sulfur
E1019	Steel, iron, nickel, cobalt alloys	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques	〇	-
E1587	Nickel	Standard Test Methods for Chemical Analysis of Refined Nickel	〇	〇
E1941	Refractory metals	Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis	〇	-
E1915	Ores and related materials	Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics	〇	-
D1552	Oil and petroleum	Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)	-	〇
D4239	Coal and coke	Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion	-	〇
D5016	Coal and coke combustion residues	Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption	-	〇
D1619	Carbon black	Standard Test Methods for Carbon Black—Sulfur Content	-	〇

ISO	Material to be analyzed	Title	Carbon	Sulfur
TR 15349-1:1998	Unalloyed steel	Determination of low carbon content -- Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation)	〇	-
TR 15349-3:1998	Unalloyed steel	Determination of low carbon content -- Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating)	〇

Detection method		NDIR (Non-Dispersive InfraRed)
Required sample amount		1.00 ± 0.10 g
Minimum reading		0.000001% (m/m) for both Carbon and Sulfur
Carbon	Measurement range	0.0003 〜 6.0% (m/m)
	Accuracy (Repeatability)	σn-1 ≦ 0.00015% (m/m) or RSD ≦ 0.75%
Sulfur	Measurement range	0.0004 〜 1.0%（m/m）
	Accuracy (Repeatability)	σn-1 ≦ 0.00020% (m/m） or RSD ≦ 2.00%
Setting temperature range		0 (room temperature) - 1450℃
Dimensions [ W x D x H ]		Combustion unit: 443 × 725 × 710 mm Measurement unit : 271 × 725 × 710 mm
Mass		Combustion unit: 77 kg, Measurement unit : 53 kg
Power		200/220/240 V, 5 kVA *Excluding peripheral devices
Carrier gas		Oxygen: Purity 99.5%, Pressure: 0.30〜0.33 MPa
Operation gas		Nitrogen: Purity 99.5%, Pressure: 0.35〜0.38 MPa *Dry air excluding moisture and oil content can be used as the operation gas only for the standard model
Data processing and operation		PC with Windows® 10
User interface		Touch panel/Keyboard/Mouse

* Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or
other countries.

Quantitative analysis of carbon contained in bone substitute material

Can we accurately and quickly measure the amount of carbon contained in the material?

Can free carbon in SiC be rapidly and conveniently quantified?

Sulfer is added in the natural rubber to produce plastic materials. However, it is important to measure the sulfer contained in the rubber to define the chemical and mechanical properties of the final product.

This application note describes the method and conditions to use with the EMIA 820V C/S analyzer to measure cement.

Ferrosilicon is added as a deoxidant and as an alloying element to steel, that require a special low carbon content. The Low Carbon in Ferrosilicon decreases the electrical conductivity and magnetostriction of electrical steels.

Copper in reddish metal, it is malleable, ductile and an extremely good conductor of both heat and electricity. Copper metal is widely used for electrical wiring, water piping, and corrosion resistant parts, either pure or in alloy such as brass and bronze. Carbon and Sulfur are considered as impurities, so it is important to measure and check the Copper purity.

Titanium oxide are used primarily in the production of paints and plastics and are also used in paper, priniting inks, cosmetics, textiles and food stuffs.

Carbon Analysis: Organic and Inorganic Carbon in Soils

The aim of this application note is to explain the determination of organic and inorganic carbon in soils and how to prepare samples to eliminate inorganic carbon (carbonates) in these soils.

Size: 2.42 MB

EMIA-STEP catalog