The following specifications are for the standard Fluorolog-QM-75-22 system.
Options and upgrades may be available upon request.
|Signal-to-Noise Ratio||(>35,000:1 FSD)|
|Data Acquisition Rate||1,000,000 points/sec. to 1 point/1000 sec.|
|Inputs||4 photon counting (TTL); 4 analog (+/- 10 volts); 1 analog reference channel|
(+/- 10 volts); 2 TTL
|Outputs||2 analog (+/- 10 volts); 2 TTL|
|Emission Range with|
|185 nm to 900 nm (optional to 5,500 nm)|
|Light Source||High efficiency “ECO” friendly continuous 75 W Xenon arc lamp|
(Optional 450 W Xenon)
|Excitation and Emission|
|700 mm, triple grating, coma-aberration corrected, asymmetrical, excitation or emission|
optimized, Czerny-Turner design with computer controlled slits at entrance, intermediate
plane and exit.
|Slits||Computer controlled, continuously adjustable|
|Excitation Grating||1200 line/mm 300 nm blaze, (Up to two optional gratings can be ordered)|
|Emission Grating||1200 line/mm 400 nm blaze, (Up to two optional gratings can be ordered)|
|Wavelength Accuracy||+/- 0.3 nm|
|Minimum Step Size||0.01 nm (grating dependent)|
|Standard Detection||Multimode, -20 degrees Celsius cooled, 1600 Volt PMT housing;|
Multimode: Photon Counting, 3 analog (fast, medium, slow response),
direct and Single-Shot Transient Digitizer (SSTD) mode,
and Time-Correlated Single Photon Counting (TCSPC), R928P PMT standard (other PMT's available)
|R928P PMT Dark Count:||10 counts per second or less|
|R928P PMT Maximum|
Linear Count Rate:
|10,000,000 counts per second|
|System Control||Computer interface with FelixFL spectroscopy software|
|Lifetime Range||5 ps to seconds with appropriate time-resolved accessories|
HORIBA Scientific has a policy of continuous product development, and reserves the right to amend part numbers,
descriptions and specifications without prior notice.