Virtual Information Program

SignatureSPM, the first multimodal characterization system built on an automated Atomic Force Microscope platform and integrating a Raman/Photoluminescence spectrometer, enables true colocalized measurements of physical and chemical properties. Raman spectroscopy, within this colocalized approach, provides essential data about the molecular structures and compositions, including potential contaminants at microscale. Simultaneously, AFM contributes information about the topographical and mechanical properties of the samples, offering detailed data into their surface textures, surface adhesion, roughness, and stiffness at nanoscale.

During this webinar, we will cover the InverTau specifications and features, demonstrate the EzTime Image software platform’s ease-of-use and the FLIMera’s remarkable FLIM-video capabilities for capturing dynamic-FLIM and quickly scanning samples for regions of interest.

In this webinar, we show the relevance of applying spectroscopic tools such Raman, Photoluminescence, Time-Resolved Photoluminescence and Cathodoluminescence in characterizing key wafer performance parameters for wide bandgap materials.

Microplastics are becoming the 21st century environmental scourge. To control it, more and more regulations are being set in all countries worldwide to monitor the amount of microparticles released in the environment. Thus, some techniques have been identified as reference methods: Pyrolysis GC-MS, Infrared microscopy, and Raman microscopy. This last one provides the best combination of information in both morphological and chemical characterization of each particle down to the micron. During this webinar, we will present how Raman microscopy is becoming the best reference method for microplastics characterization.

The webinar will be an overview of the A-TEEM technique and some specific applications for which information is gained relevant to pharmaceutical development and process analysis. Addressing such applications requires a set of tools for A-TEEM spectroscopy to help adopt the technique into labs that require Good Manufacturing Practices (GMP) and are also focused on efficiency and ease-of-use.

Raman spectroscopy is a good technique for chemical and physical characterization of materials, but suffers from a few limitations like a lack of sensitivity, or its micron scale resolution. Since the 1970s, the coupling of the plasmonic effect with Raman is more and more being used to overcome these limits. This phenomena association results in two enhanced Raman spectroscopies called SERS and TERS, respectively associated to Surface and Tip origins. During this webinar, we present how the coupling of plasmonic and Raman effects results to with SERS and TERS and details some applications.

With the global energetic transition and the move from thermic to electric cars, the improvement of battery becomes crucial. With that development, the analytical techniques used must be also adapted and developed to understand the physical and chemical processes occurring at the electrodes and electrolyte levels. Thus, Raman microscopy is an ideal method as it provides physical and chemical properties of materials in a non-invasive approach.

Raman microscopy is the combination of the Raman effect and optical microscopy. A Raman microscope is the association of multiple components where each of them is playing a specific role to achieve highly resolved and sensitive measurements. During this webinar, we present the role of each component of a Raman microscope and detail their characteristics and limits.

More and more, Raman microscopy is being used for a wide variety of applications. As a vibrational spectroscopy, it is mainly compared with Infrared absorption. However, the origins of this Raman effect and the information provided by Raman spectroscopy are different than any other. During this webinar, we will present what the Raman effect is and what kind of information can be obtained based on a Raman spectrum.

The pharmaceutical product development process involves many different steps and needs in molecular characterization. Thus, understanding API crystal forms, controlling API and excipients interactions or process optimization needs techniques that are able to manage different forms of molecules with a minimal sample preparation. As a result, Raman microscopy is so becoming a standard technique in pharmaceutical laboratories.

Centrifugal sedimentation technique are gaining attention as an evaluation tool for materials study field especially nanomaterials. In this talk, we discuss the several case study by centrifugal nanoparticle analyzer Parica CENTRIFUGE covered the application of CMP slurry, battery materials and so on.

This presentation summarizes exciting new results including accurate quantification of phenolic and anthocyanin compounds, tannins, oak and smoke volatiles and glycoconjugates, as well as pH, sulfites and other basic chemistry parameters in a single scan.

In this talk, we discuss the topic of EV isolation with a focus on the most popular method of size exclusion chromatography and the challenges in characterizing their size distribution. Additionally, Ya-Hong Xie from UCLA will share his perspective of how this line of research could lead to deepening our understanding of exosomal biology pertaining to their diagnostic and therapeutic promises.

The A-TEEM Compliance Package is now available from HORIBA and enables A-TEEM to be used in a GMP environment. Discussion points will be around both the pharmaceutical applications of A-TEEM and the details of the compliance package for GMP labs.

In this webinar, we will present the Raman spectra of commonly used metal oxides, NMC and LFP; discuss the effect of the measurement conditions; and explore chemical imaging of the electrodes (active materials, binder, carbon, etc.) You will also discover also how Raman spectroscopy may be applied for quality control (QC) of battery materials processing. We will showcase a complete workflow for analyzing the degree of carbon coating and defects in electrode materials, from sample preparation to Raman acquisition, data analysis to final reporting.

Gain insight into how HORIBA is providing innovative development tools to help accelerate the adoption of hydrogen technologies. These tools allow engineers, researchers, and scientists to address tomorrow’s challenges and to improve performance, quality, and cost. Furthermore, explore HORIBA’s large panel of techniques such as Raman, fluorescence, glow discharge, particle size, ICP, AFM, ellipsometry, C/S and O/N/H analyzers, and impedance spectroscopy.

This webinar will introduce micro X-ray fluorescence (XRF) technique to quantify Pt distribution at the beginning of life and after aging in fuel cell catalyst layer.

To create innovative cosmetic products with proven effects, a sound scientific understanding of the biological matrices (skin, hair, teeth), the development of effective and safe active ingredients, optimised formulations and instrumental performance evaluation are essential. During this webinar, we will demonstrate how HORIBA instruments cover a wide range of cosmetic testing applications.

Raman microscopy is more and more becoming a standard method in many application domains. This transforms Raman microscopy from a high-end technique to one that is widely used. Consequently, it has to come with tips-and-tricks, but also with dedicated tools to support these different applications. These supporting tools can be accessories or software dedicated apps. During this webinar, we detailed the tools and accessories supporting Raman microscopy for specific applications.

In this webinar you will learn about: The Aqualog's A-TEEM technology that combines UV/Vis absorbance with multidimensional fluorescence. The benefits of using A-TEEM as an alternative to HPLC and GC for the analysis of dietary supplements and other natural products.

See examples of macroscopic and microscopic Raman and X-ray fluorescence spectroscopy for various applications in forensic science, including the identification and characterization of pharmaceutical products, paint pigments and gemstones.

Raman microscopy couples both submicron-scale spatial resolution and high spectral resolution. Thus, achieving the best performances is dependent on a good calibration in both spatial and spectral dimensions. During this webinar, we detailed the different calibration routines applied on Raman microscopy to achieve ideal measurements while remaining compliant with regulations. We also explained how these routines work and why they are important to consider.

Are you tired of slow and expensive surface area measurements slowing down your production or research? Join us for a webinar introducing HORIBA's all-new SA-9650 dynamic surface area analyzer. This innovative instrument utilizes flowing gas to dramatically accelerate analysis times, providing you with fast and reliable results.

The simultaneous need to increase performance and reduce cost for today's semiconductor devices means using ever larger wafers, while reducing the size of device structures, thereby increasing their complexity. This combination of requirements means the metrology tools for characterizing such wafers need to evolve to handle such large wafers – up to 300mm in diameter. At the same time, these tools need to increase in sophistication to unravel the complexity in the ever-smaller device structures.

This joint webinar of PureNanoTech and HORIBA, will introduce the latest innovation in nanobubble technology, validated using an improved nanoparticle tracking analysis (NTA) and explore different bubble generation techniques, providing insights into nanobubbles’ fundamental principles and unique characteristics.

Optical microscopy is very common technique for visualization and characterization at the micron scale. Many modalities exist to highlight different features. However, the chemical information is almost always missing. Raman spectroscopy is a complementary technique that can provide chemical information about the sample. During this webinar, we presented how these different microscopy modalities, combined with Raman spectroscopy, make Raman microscopy so powerful.

Do you need help finding the best method to grind or classify your product to the correct particle size and shape? With constantly advancing technology demands, many are looking for answers on how to create unique particles. Let us introduce you to jet milling and air classification as means to manipulate particle size and shape.

Join us and listen to the webinar to understand how the new CN-300 measures your polydisperse particles in a highly concentrated medium with high resolution over a wide measurement range.

This webinar will discuss how to solve or prevent solids flow problems in storage vessels, measure the fundamental flow properties of powders, and design hoppers, bins, and silos for reliable flow or predict solids flow in existing storage vessels.

After more than 10 years, HORIBA has released a new EMGA series of analyzers: The EMGA Pro and EMGA Pro/Expert! In a world where helium consumption is becoming an economical challenge, these new ONH analyzers couples frugality and cost savings, guaranteeing a faster analysis, an easier maintenance and a user-friendly interface.

Benefits of nanotechnology depend on the fact that it is possible to tailor processes for different applications to obtain specific characterizations, such as particle size, and thus achieve desired properties. The industry leading Microfluidizer technology is a versatile technology that can address these challenges from lab to production scale volumes.

Raman microscopy provides both molecular and morphological information of the analyzed sample. However, sometimes it is not enough to fully understand a physical or chemical process. That's why the Raman information has to be coupled with complementary information. During this webinar, we will present the different solutions existing to combine Raman with other microscopy techniques in this aim, like SEM, AFM, or all other microscopy techniques.

EyePASS 3.1 is the latest version of the Eyecon2 image analysis software. It includes several new exciting features for particle size and shape analysis. This webinar will provide an overview of the new features of EyePASS 3.1 and how they can be used to provide more insight into determining particle size and shape.

This webinar will focus specifically on Macro-Raman and the valuable information it can provide, from identification/ differentiation to quantification, to real-time process monitoring.

In this webinar, Dr. Willie Hendrickson will take a closer look into the fundamentals of spray drying, how the industry uses engineering solutions to help with consistency and outline the gaps in our understanding of processing with food-grade and industrial materials.

During this webinar, we will explain impact of processing on Raman spectra and the solutions for Raman image analysis, including multivariate analyzes.

Image analysis is intuitively appealing. It reliably characterizes a large number of particles while offering high-resolution size and shape information from microns to millimeters. This introductory webinar features Dr. Günther Crolly of Fritsch and Dr. Jeff Bodycomb of HORIBA who will cover the basics of the dynamic imaging technique and highlight the features of ANALYSETTE 28.

Switching between microscopes has never been so fast and accurate. Sometimes you would like to access a microscope that is not available in your own lab, don’t you? nanoGPS allows fast relocalisation of points of interest between different microscopes and modalities: Raman, SEM, EDX, EBSD, cathodoluminescence, optical microscope, AFMs and more!

This webinar will take a closer look into the fundamentals of solids processing, how the industry uses engineering solutions to help with consistency and outline the gaps in our understanding of industrial processing. Practical examples featuring blending, size separation, drying and particle formation using polymer, food and ceramic materials will be used to illustrate these challenges.

In this webinar you will learn how the new Circular Economy Action Plan will influence the design of the future packaging and its waste management and you will gain insights how Raman Spectroscopy/Microscopy can be the perfect tool to address these new challenges.

Choosing an appropriate particle measurement approach is often more thought-provoking than it seems. For laser diffraction, there are many dispersion accessories and instrument options. In this webinar, Dr. Jeff Bodycomb will present a range of options that will lead to easy and successful analyses and the considerations behind each choice.

Featuring solutions for fluorescence spectroscopy, particle analysis, atomic force microscopy (AFM), Raman and X-Ray fluorescence and dedicated accessories, HORIBA can help you to characterize your fluorescent bioprobes and fully explore their features.

Dr. Jeff Bodycomb introduces dynamic light scattering (DLS), a fast, repeatable, and accurate size determination for nanoparticles and large molecules. Here Jeff introduces and reviews the technique while also discussing method development, application results, data interpretation, and comparison with other nanoparticle analysis techniques.

Analyzing particles over a size range of 10's of nm to millimeters? Looking for a high throughput particle sizing technique to support development or manufacturing QA? Need a simple method to ensure you can focus on your problem, not the finer points of scattering theory? Laser diffraction has evolved to meet all of these requirements. Join HORIBA session and we will introduce laser diffraction to get you started or as a refresher.

Nanobubbles in water exhibit many appealing characteristics, such as a long residence time of bubbles in water due to their low buoyancy and stability against coalesces, collapse or burst. Long retention times in water potentially enhance chemical reactions and mass transfer in processes such as ozonation or aeration. This presentation will give an overview of the common generation processes of nanobubbles and their respective principles.

As the requirements for analyses evolve, analysts need to run more and more complex samples, such as how to analyze impurities in graphite without any digestion needed for fabrication of rechargeable batteries? This, and other examples of analyses where high resolution is needed, will be discussed during this webinar. See how easily you can manage these complex analyses using our ICP-OES.

Obtaining a very good Raman spectrum or image is not always very easy. Many parameters must be considered to get the ideal result. During this webinar we will describe the impact of each acquisition parameter and demonstrate how they can be easily optimized, especially in LabSpec6. Thus, Raman spectra and Raman maps acquisitions will become a child’s play for you.

In this webinar, explore how Raman microscopy can be used to identify and characterize microplastics and nanoplastic samples through examples such as hand sanitizer. Plus, gain an overview of the latest HORIBA Scientific solution software: Particle Finder™.

Representative application examples of the use of XRF spectroscopy in industry, art, and forensics will also be shown and discussed.

We will present several examples to highlight the capabilities of the fluorescence A-TEEM method, a novel approach which combines UV/Vis with fluorescence EEM spectroscopy. The benefit of this approach is the ability to provide robust and rapid spectroscopic characterization of vaccine components and vaccine formulations, samples that are extremely challenging to traditional spectroscopies, such as Raman and NIR.

Raman microscopy is an increasingly commonly used technique in analytical labs. However, only few manufacturers can provide high quality instruments that make an appropriate balance between flexibility and ease of use. Several key performance characteristics need to be considered when deciding what makes a good Raman microscope. In this webinar we will demonstrate, how the various instrument characteristics impact on what makes a good Raman microscope.

A method for quantitation of fulvic fraction (FF) and sulphonated humic acid (SHA) in commercial humic products using A-TEEM technology combined with PARAFAC, PCA and PLS analyses will be presented.

In this webinar, we will present a better way to determine cannabinoids in hemp and cannabis, using a combination of UV absorbance-transmission and fluorescence excitation emission matrix spectroscopy, called “A-TEEM.”

In this webinar, we show results from a multimodal microspectroscopy system from HORIBA for semiconductor characterization. The so-called SMS system is a modular and flexible system capable of accommodating up to seven different spectroscopies including Raman, Photoluminescence, Time-Resolved Photoluminescence (Lifetime), Reflectance and Transmittance, etc.

This webinar will provide an overview of various agglomeration techniques with a consideration of their advantages and disadvantages. The focus will be on fluid bed agglomeration, but extrusion and high-shear agglomeration examples will also be discussed. In addition, different types of materials and their wetting characteristics in correlation to particle size distribution and flowability will serve as examples.

This presentation will begin with the fundamental building blocks for this technique and illustrate the basics so that scientists and technicians who are new to this method or even those who are well versed can better familiarize themselves with the basics. Then, this presentation will primarily focus upon the calculation of surface area from gas adsorption raw data using the BET (Brunauer, Emmett and Teller) method.

This is the first webinar of our Nanoparticle Tracking Analysis series. Here Dr. Jeff Bodycomb introduces the technique in detail along with recent advances in the field. For perspective, Jeff compares NTA with dynamic light scattering (DLS) with practical examples. Join us for this introduction to a (very) small world.

Join Dr. Willie Hendrickson as he discusses the use of multiple characterization techniques to enhance process understanding. Practical examples will include materials such as ceramics, glasses, polymers, food ingredients, and carbon blacks as they are used in the specialty chemical, food, animal feed, personal care, or automotive industries.

In this webinar, you will hear leading imaging experts, Darren McHugh and Girish Mallya, from Innopharma Technology illustrate what Convolutional Neural Network (CNN) is and how it offers users the ability to create a software model that emulates human vision, thereby offering robust, automated, and accurate particle segmentation. You will gain confidence in the CNN-powered image processing for features such as particle size and shape.

Join Dr. Kevin Dahl of Particlese LLC and Dr. Linda Kidder of HORIBA Scientific provide tips and alternative solutions for better vaccine development and quality. They will discuss the application of multi-laser nanoparticle analysis (NTA) in determining vaccine degradation and total particle count. They will also present a new analytical approach, fluorescence A-TEEM method for rapid screening of similar but different vaccine final formulations.

In this introductory webinar for Partica CENTRIFUGE Centrifugal Nanoparticle Analyzer, Dr. Mike Pohl will discuss the innovations made that allow a long-established sedimentation technique to extend its measurement down to 10 nanometers and up to 40 microns. The talk will dive into practical case studies to demonstrate CENTRIFUGE’s unique ability to deconvolute individual peaks of very close multimodal particle mixtures. Various applications will also be presented. A Q&A session will follow.

The demand of plastic recycling is increasing drastically since few years as only a tiny proportion of them are collected and then recycled. Nowadays, plastics that can be recycled are issued of different polymers type such as PE, PVC, PET, ... During this webinar, HORIBA will introduce some new technologies or solutions that can be considered for polymers applications and how they could contribute in a “greener” environment.

The focus of this presentation will be on jet milling and air classification, starting with a description of the processes. Comparison examples to other grinding processes with different types of materials and their grinding characteristics, as well as examples showing how jet milling and air classification can be optimized for particle size and range, will be featured.

The circular economy of food contact materials requires a thorough review of risk management: construction of an observatory, reference materials, rapid identification and measurements, generalization of migration modeling for unknown substances, evaluation of mixed substances, safe design for recycling, emerging risks due to aging, etc. The presentation provides an update on research priorities.

In this webinar, Drs. Jeff Bodycomb and Sergey Mamedov talk about particle analysis and spectroscopic techniques (Raman and XRF) for evaluating these important components that power 21st century technology. They describe a range of techniques and give examples of their practical application.

Cannabidiol (CBD) is used in a variety of commercial products, from dietary supplements, to food and beverages and cosmetics. Potency, particle size, and stability all play an important role in the quality control, regulation, and efficacy of CBD/Hemp emulsions. In this webinar, we describe current guidance from FDA, and describe novel, cost effective approaches from HORIBA that address several testing needs of emulsions.

This webinar will present the history, structure, and current research program of the International Fine Particle Research Institute (IFPRI). We will also look at the benefits of IFPRI membership including access to over 700 papers and reviews, focused workshops on particle science and technology areas, and a new emphasis on continuing education in particle science and technology.

Analyzing particles over a size range of 10's of nm to millimeters? Looking for a high throughput particle sizing technique to support development or manufacturing QA? Need a simple method to ensure you can focus on your problem, not the finer points of scattering theory? Laser diffraction has evolved to meet all of these requirements. Join Dr. Jeff Bodycomb as he introduces laser diffraction to get you started or as a refresher.

While we all understand that there may be more steps to the successful commercialization of any idea or product, until you actually go to commercialization, the process and the new challenges are potentially confusing. Dr. Willie Hendrickson will share his experience and provide clarity into the mysteries of development (scale-up), commercialization, and the path through the Valley of Death.

Dr. Nicole Comfort of Columbia University discusses the approach her team uses for comparing the efficiency of two previously published CNS-EV isolation methods. The use of blood-isolated CNS-EVs are biomarkers of metal exposure and disease progression in amyotrophic lateral sclerosis (ALS). In this webinar, learn about Dr. Comfort’s exciting research and the important role of nanoparticle tracking analysis (NTA).

This webinar is an introduction to particle size analysis for cosmetics applications. Chris Harrison of H Squared Industries (in partnership with EVIO Labs) includes a brief overview of particle size analysis and its role in product stability, effectiveness, and acceptance. We will discuss the impact of particle size and size distribution on product quality, CBD/non-CBD emulsions, and the role in cosmetics going forward.

While seemingly simple, blending can provide many surprising challenges. Each type of process; including dry blending, powder blending with added liquids, or the blending of micro ingredients, contains unique issues. In this webinar, Dr. Willie Hendrickson of AVEKA, Inc. will include an overview of segregation during blending, types of mixers used, and a number of practical examples of blending issues and challenges.

Sample preparation and instrument setup are crucial parts of obtaining good data. Method development is thinking through and testing sample preparation and instrument setup to ensure optimal results. That is, variations due to sample preparation should be minimized. Questions include: Should the sample be run in suspension or as a dry powder? What salts or surfactants are needed for the suspension? How much energy should be applied and how?

In a recent report McKinsey predicts that increasing and accelerating regulation, and regulatory complexity, is one of the key factors that will shape the packaging industry in the years to come. This presentation will shine a light on the current and upcoming European packaging legislation, the so-called Brussel effect, and the impact these developments will have on the packaging sector.

Professor Dan Lark gives a talk through the WebEVTalk series focusing on their findings in extracellular vesicles (EVs) secretion between skeletal muscle and white adipose tissue. This study uses transgenic fluorescent reporter mice and various analytical techniques including multi-laser Nanoparticle Tracking Analysis to collectively demonstrate improved understanding of EV secretion by different tissues and their biodistribution.

Introduction to Tip-enhanced Raman scattering (TERS) imaging. Application of TERS and TEPL imaging to characterization of defects and heterogeneities in 2D materials. TERS Imaging for nanoscale spectroscopic characterization of lateral and vertical heterostructures of 2D materials.

Understanding and communicating analysis results are a key part of practical particle characterization. There are a number of specialist terms that are used to precisely describe the result, but these terms can confuse the unwary. This webinar reviews communicating size analysis results and what various terms mean about your sample and specifications.

Fabrication of commercial integrated circuits depends critically on the physical and chemical properties of the abrasive slurry particles used to polish silicon wafer surfaces via chemical-mechanical planarization. The particle size distribution of the abrasive particles is a key factor in the CMP process. In this presentation, the use of fluorescence correlation spectroscopy in conjunction with particle tracking using the Viewsizer 3000 is described.

Drs. Katherine Y. Bell, (Director of Water Strategy), and Martha J.M. Wells (Chemical Consultant to Brown and Caldwell) will co-present this webinar. Kati will provide an overview of water treatment at Brown and Caldwell and what services are offered. Martha will provide the fundamentals of the technologies applied and a discussion of our current understanding of organic matter aggregation in water.

Fluid bed drying is a process by which particles are fluidized and dried. For the material to become fluidized, the particulates are placed under conditions that cause it to behave like a fluid. In this webinar, Willie Hendrickson, Founder and CEO of the AVEKA Group and President of IFPRI, will discuss in detail the advantages of fluid bed drying and what instances this technique should be used over other drying processes.

Handling powders and bulk solids is an essential element of many manufacturing processes. During these processes, key considerations are controlling and predicting the particle size and shape data, as collected in situ. In this webinar, Darren McHugh will provide a demonstration of the Eyecon2 real-time imaging particle size analyzer, then review in-depth how the results compare to sieve and other correlation methods.

Dynamic light scattering (DLS) is a common technique to determine size and zeta potential of colloidal particles in a suspension. In this webinar, Prof. Iryna Zenyuk and Prantik Saha will discuss how DLS helps prepare catalyst inks with high electrochemical performance required for optimal design of these systems, and thus, help build a zero-carbon emissions society.

Raman microspectroscopy is an excellent probe of particle composition and particle size. Laser diffraction is a workhorse technique for particle size determination and offers precision and speed. Join Dr. Jeff Bodycomb and Dr. Eunah Lee as they discuss using both of these techniques for analyzing pharmaceutical powders and emulsions and comment on how they fit together.

In this webinar, Dr. Jeff Bodycomb introduces, compares, and contrasts the three main techniques for nanoparticle analysis: Dynamic Light Scattering (DLS), Laser Diffraction, and Nanoparticle Tracking Analysis (NTA), including the latest advances. He includes applications and information to help you think about the best way to get the answers you need.

In this webinar, Dr. Anderson Bonon and Dr. Matthieu Chausseau will use laser diffraction, image analysis, X-ray fluorescence and elemental analysis (C/S, O/N and H) to demonstrate effective control of the raw material as well as recycled powder. Case studies obtained from various powders commonly used in processes will be discussed with a Q&A session to follow.

In this webinar we will demonstrate why Raman microscopy is the technique of the future for your labs.

In this webinar you will receive a full demonstration of the capabilities of the next generation laser diffraction particle size analyzer - the Partica LA-960V2. You will learn to measure ceramic powders, why accuracy is important, and see a hands-on demo direct from the HORIBA Applications Lab.

This presentation will focus on the principles of enhanced darkfield optics and optical hyperspectral imaging. It will also include example applications in areas including nanotoxicology, nanomedicine and SERS related research.

The LA-960V2 laser diffraction particle size analyzer advances scientific knowledge for tomorrow's world through intuitive software, unique accessories, and high performance. The NEW "V2" can easily measure nanoparticles (10 nm) to 5,000 µm in less than 60 seconds with accurate, reproducible results. In addition, by adding the Imaging Unit Accessory, you can see your particles in real time when running the wet system.

Glenn Evers, international titanium dioxide consultant and former DuPont TiO2 research scientist & inventor will reveal pigment properties needed for the most valuable next generation paint. In this webinar, you will learn: basic properties of white TiO2 pigment for paints, particle size properties of resins and pigments to optimize water-based paints, how to achieve a high ROI using a particle size instrument, and why one-coat paints have room for improvement.

Experts in multiparticulate applications from Colorcon and Innopharma Technology will discuss how computational design and PAT can help build more robust formulations, predict multiparticulate performance, and accelerate development by reducing traditional iterative trial and testing practices in development. Discover how the best practices and technology presented here will accelerate formulation development and improve quality outcomes for your multiparticulate formulations.

izabela possui graduação em Engenharia de Alimentos pela Universidade Federal de Viçosa, mestrado e doutorado em Alimentos e Nutrição pela Universidade Estadual de Campinas. Vem desenvolvendo pesquisas em microencapsulação desde 2008, voltadas a aplicação em produtos alimentícios, no Centro de Tecnologia de Cereais e Chocolates, no Instituto de Tecnologia de Alimentos com foco na proteção e liberação controlada de substâncias diversas.

Research on exosomes and other forms of extracellular vesicles (EVs) have rapidly expanded over the last two decades. These lipid-enclosed, nanoscale messengers are released from cells packed with diverse cargo and can travel long distances to modify the function of target cells. Learn more about what exosomes are, how researchers study them, and what challenges remain.

Image analysis can be used for particles with sizes ranging from about a micron to tens of millimeters. Learn about this powerful technology for high resolution particle size and shape measurement. This webinar will cover the basics of the technique and some considerations for obtaining reliable data.

Suspensions are two-phase systems implying that an interface exists between the surface of the material and the liquid in which it is dispersed. The bulk properties of any suspension are dependent upon – and controlled by - two fundamental parameters: the extent of the particle-liquid interface which is characterized by, for example, particle size; and the nature of that interface, characterized by, for example, surface charge.

Surface area is an important physical property that influences the reactivity, dissolution, catalysis, and separation of materials. The surface area often must be carefully engineered and measured to optimize specific functions. In this webinar, our applications lab will help explain BET theory, the theory behind surface area as well as how to ensure good BET measurements.

Multi-laser Nanoparticle Tracking Analysis (NTA) is an advanced patented technology featuring three simultaneously operating lasers with independently adjustable power. In this webinar, Dr. Jeff Bodycomb will offer a broad overview on how multi-laser NTA technique fits into the gene therapy space and where we and our collaborators see the applications going in the near future.

During this webinar we will show how combining Raman and µ-XRF characterization with this co-localization tool generates valuable information for a range of applications.

Dynamic light scattering (DLS) is a fast, accurate, and popular method for analyzing nanoparticles and large molecules such as proteins and polymers. In this webinar Dr. Jeff Bodycomb reviews the technique along with comments on method development, application results, and data interpretation.

The presentation, entitled, “Fast Characterization of nm Thin to Thick Coatings using Pulsed-RF Glow Discharge Optical Emission Spectrometry,” will show this technique’s ability to characterize both conductive and non-conductive layers and coatings from nm to 100+ microns thickness.

An introduction to basic experimental considerations when choosing laser diffraction for particle size analysis. The presentation will explain what makes laser diffraction a “modern technique.” Both wet and dry case studies will be shown along with brief demonstration videos. Learn about method development, choosing an appropriate refractive index, and understanding the analysis results.

(Spanish Webinar) La medición de tamaño de partícula por difracción láser estática debe ser validada, en la industria farmacéutica según ICH Q2(R1), tomada como referencia y armonizada por USP-EP-JP. Esa guía fue reabierta para incluir los conceptos de ciclo de vida y aptitud para propósito. Esta exposición ilustra la aplicación de estos conceptos.

Dr. Willie Hendrickson will explain the development process for particles with specific attributes that can cause problems during production. His talk will focus on alternative processing methods, the importance of understanding the materials being used, and what can happen when you do not understand the functional properties that you are designing for.

This webinar is the beginning of a series reviewing a number of modern measurement techniques. Dr. Michael Pohl, Vice President of HORIBA Scientific, describes some common ideas in particle characterization along with common questions to ask when selecting a technique. Mike will also give a very brief overview of some modern techniques before subsequent webinars go into detail.

Accurate concentration for virus and virus-like particles can be determined by multi-laser nanoparticle tracking analysis due to the fact they are nanoparticles. In this webinar, Dr. Jeff Bodycomb will discuss the use of multi-laser nanoparticle tracking analysis (NTA) to determine the size distribution and concentration of these species, the latter which is correlated to viral infectivity.