FACT 220

FACT 220 product picture
FACT 220 product picture
FACT 220 product picture
FACT 220 product picture

Test Unit for Fuel Measurement Systems

FACT 220 is a testing device for automatic verification of the calibration of the sensors installed in the FQ fuel flow measurement systems. The measuring unit of FACT 220 consists of a density and fuel flow sensor that allows to check the entire measuring range. The volumetric flow rate is set by a remote controlled valve and can be set automatically with predefined points for a fast verification and high precise quality of the measurement result. The FACT 220 is operated via a control panel; hereby you can start the validation procedure and status as well as statistical values can be traced with.   

There are two possibilities to connect the FACT 220, to the inlet circuit of the FQ fuel flow measurement system or like a specimen in the outlet circuit. The flow deviations between FQ system and reference will be valuated with a status message. At the end of the testing procedure a test report will be created. An additional tank is filled with preservative for post-treatment after measurement. The unit will be connected over Ethernet-Interface with the fuel flow meter for data transfer and remote control of all functions like manual and automatic testing and purging. The system is designed for commercially available fuels, Ethanol up to 100%, Kerosine and Biodiesel.

 

 

Segment: Automotive Test Systems
Division: Mechatronics
Base product
  • High exactness of the measurement in the whole measurement range 0.2…220l/h 
  • User-friendly handling through Touch-Panel; test results are displayed 
  • Quick check of individual measurement points through manual test mode
  • Summation counter for fuel flow volume and hours of operating service
  • Different connection possibilities for checking of the whole system or flow sensor by itself 
  • Test report with statistical values
  • Online evaluation of actual measurement uncertainty through continuous calculation of statistic values (moving average, standard deviation)
  • Predefined measurement values for different sensors

 

 

Measurement range volume flow 0.2...220 l/h
Measurement range density 0.5...2g/cm³
Fuel Pressure of system 2...2.5 bar
Supply voltage 230 V
Power frequency50/60 Hz
Nominal current 2 A
Size675mmx1120mmx540mm

 

REQUEST FOR INFORMATION

Do you have any questions or requests? Use this form to contact our specialists.