EMIA-Pro

Carbon/Sulfur Analyzer

Standard Model: EMIA-Pro
Enables everyone to become a professional analyst

The EMIA-Pro Carbon/Sulfur Analyzer is based on HORIBA’s widely respected expertise in Non-Dispersive Infrared (NDIR) technology.
It offers improved the cleaning efficiency, enhanced user-friendly software, durability, operability and maintenance to ensure efficient measurements and its shortened cycle time accelerates your development and manufacturing speed.

Segment: Scientific

Division: Carbon/Sulfur & Oxygen/Nitrogen/Hydrogen Analyzers

Fabricant: HORIBA, Ltd.

Long MTBM (Mean Time Between Maintenance)

The unique newly-developed cleaning mechanism (patent pending) clears the dust in the furnace, allowing the operator to continue to use the EMIA-Expert/Pro without maintenance cleaning for up to 200 measurements*.
* It depends on sample and measurement condition

Before measurement After 200 measurements

High Throughput

EMIA Series can complete one measurement cycle, “measurement-display result-cleaning”, in 70 seconds (i.e. about 50 samples/hour)

Fast & Easy Maintenance

With the latest innovations the cleaning time for the EMIA Series instruments is typically half of that of our conventional models. The flat design around the crucible stand and simple design around the furnace also simplify user access for cleaning.

Flat design around the crucible stand

Advanced Operation software

A critical focus was to ensure that the EMIA-Expert/Pro Series was “easy-to-use”. In particular, we focused on the layout, operating menus and functions.
We have included a self-diagnostic monitor checking capability to check the status of the connected device, an alarm function and we have expanded 3 navigators to facilitate daily operation.

* Analysis Navigator　

This function uses the recommended best measurement flow and operating condition based on our experience.

* Troubleshooting Navigator　

Automatic diagnosis system and troubleshooting navigator.

* Maintenance Navigator　

Periodic preventive maintenance work navigator by videos and photos.

Upgradable

The customer can extend the system’s functionality at any time, even after installation, depending upon their needs. Upgrades include:
* Carrier gas purifier for ultra-low concentration carbon measurement
* Auto-sampler (20 positions)
* Halogen trap unit

Contents		EMIA-Pro
Required sample amount		1g ± 0.1g
Typical Meas. time		70 seconds/cycle
Carbon	Meas. Range (m/m)	1.6 ppm - 6.0%
Carbon	Blank accuracy	σ_n-1≦ 0.8 ppm
Sulfur	Meas. Range (m/m)	2.0 ppm - 1.0%
Sulfur	Blank accuracy	σ_n-1≦ 1.0 ppm
Sample meas. Accuracy	Carbon	σ_n-1 ≦ 2.0 ppm or RSD≦1.0%
Sample meas. Accuracy	Sulfur	σ_n-1 ≦ 2.0 ppm or RSD≦1.5%
Utility	Carrier gas	Oxygen (Purity; 99.5%, Pressure; 0.30-0.33MPa)
	Operation gas	Nitrogen (Purity; 99.5%, Pressure; 0.35-0.38MPa)
	Power	200/220/240V, 50/60Hz, 5kVA
Dimensions	Main unit*	500(W) x 725(D) x 710(H) mm
Mass	Main unit	approximately 134 kg
Data processing and operation		USB data communication with PC Windows 8.1 Touch panel or Key board and mouse operation
Model name		EMIA-20P: Carbon/Sulfur EMIA-21P: Carbon EMIA-22P: Sulfur

Note) "ppm" is equal to mg/kg.

*Except piping parts, projection parts (D:79mm) and flow meter on the back side.

Schematics

Accessories

Crucible Pre-heating Unit

The crucible pre-heating unit; FK-100 with automatic transportation function to heat a ceramic cruible at 1100 degree in 10min. before analysis.

Autosampler

Automation crucible loading and disposing unit. Up to 20 pcs of crucible are available to be set.

Consumables

Ceramic crucible

Low carbon blank and high dimension tolerance for high precision analysis.

Accelerators

High-purity materials which support stable analysis: Tungsten(W), Tin(Sn), Copper(Cu), Iron(Fe)

Quantitative analysis of carbon contained in bone substitute material

Can we accurately and quickly measure the amount of carbon contained in the material?

Quantitative analysis of carbon and sulfur in tires

To accurately and quickly measure the amount of carbon and sulfur contained in the material.

This application note describes the method and conditions to use with the EMIA 820V C/S analyzer to measure cement.

Sulfer is added in the natural rubber to produce plastic materials. However, it is important to measure the sulfer contained in the rubber to define the chemical and mechanical properties of the final product.

Ferrosilicon is added as a deoxidant and as an alloying element to steel, that require a special low carbon content. The Low Carbon in Ferrosilicon decreases the electrical conductivity and magnetostriction of electrical steels.

Copper in reddish metal, it is malleable, ductile and an extremely good conductor of both heat and electricity. Copper metal is widely used for electrical wiring, water piping, and corrosion resistant parts, either pure or in alloy such as brass and bronze. Carbon and Sulfur are considered as impurities, so it is important to measure and check the Copper purity.

Titanium oxide are used primarily in the production of paints and plastics and are also used in paper, priniting inks, cosmetics, textiles and food stuffs.

Carbon Analysis: Organic and Inorganic Carbon in Soils

The aim of this application note is to explain the determination of organic and inorganic carbon in soils and how to prepare samples to eliminate inorganic carbon (carbonates) in these soils.

0.61 MB

EMIA Series catalog