HP-480PL

Panel-mount Type pH Meter (Four-Wire Transmission, Pulse Proportional Control)

HP-480PL industrial pH meter is a pH meter with a pulse proportional control function, which can drive a pulse pump directly.
It connects pH sensor and measures pH and temperature in the sample water.

As the HP-480PL has a high injection resolution per pulse, it can be used to control a pulse pump as part of a system for processing involving fine control of pH values, for example controlling the pH values of microscopic or small samples.

Measuring range

pH: 0 - 14
Temperature: 0 - 100 ℃

Division: Process Water
Manufacturing Company: HORIBA Advanced Techno Co., Ltd.

 

  • Pulse proportional control function
    A pulse signal proportional to the set pH value is output.
    This signal can be input directly into a pulse pump, making it possible to construct a simple system with an excellent cost-performance ratio.
  • Maximum pulse output of 360 SPM
    A maximum of 360 pulses per minute can be output.
    It has a high insertion resolution per pulse, allowing for very fine control of pH values.
  • Compatible with five types of temperature compensation element
    Five types of temperature compensation element are supported: 500 Ω, 6.8 kΩ, 1 kΩ, 10 kΩ and 350 Ω.
  • Easy pH correction
    After immersing the pH electrodes in the standard fluid, simply follow the instructions displayed and press the ENT key.
    The automatic correction process is plain and simple.
  • A line-up of lead-free pH electrodes
    Uses lead-free glass. In addition, almost all sections of the pH electrodes, including lead wires and soldered junctions are lead-free.
  • Uses lead-free solder
    To reduce the burden on the environment, lead-free solder has been used to mount the components on the printed circuit board.

 

 

Product namePulse proportional control pH meter for industrial use
ModelHP-480PL
Measuring range0 pH to 14 pH: 0.01 pH resolution.
Temperature 0℃ to 100℃: 1℃ resolution (selectable display).
Transmission
output
4 mA to 20 mA DC: input/output isolated type
Maximum load resistance: 900 Ω
Transmission
output range
Free
Repeatability and
linearity
±0.05 pH, ±0.08 mA (for transmission output range of 0 pH to 14 pH)
Contact outputOutputs: 2 points
Alarm contact output (R1 and R2)
  Contact type: relay contact, SPDT (1c)
  Contact rating: 240 V AC, 0.3 A and 30 V DC, 0.3 A (resistance load)
  Contact function: selectable from upper/lower limit operation (ON/OFF control), alarm, and maintenance.
Control actionsON/OFF control 
  • Upper/lower limit setting range: 0.00 pH to 14.00 pH
  • Control width: 0.00 to 4.00 pH (±0.00 pH to ±2.00 pH)
 
Pulse proportional
control
 
  • Upper/lower limit setting range: 0.00 pH to 14.00 pH
  • Maximum number of pulse output: Freely selectable in the range of
    1 SPM to 360 SPM.
  • Proportional band: 0.01 pH to 4.00 pH
  • Control output shift function: 0% to 50%
 
Calibration functionTwo-point automatic calibration or manual calibration
Two-point automatic calibration: with automatic validation of the electrode characteristics.
  Types of standard solution: pH 2, pH 4, pH 7, pH 9 and pH 10 (JIS)
  Combination of standard solutions: pH 7 and one of the others
  Manual calibration: Freely selectable, but the difference should be over 2 pH.
Temperature calibration (one point).
Transmission
output hold feature
 
  • Previous value hold
  • Optional value hold
  • Continuous
    Selectable from the above (However, only the previous value hold is available in the maintenance mode).
 
Self-diagnosis
function
 
  • Calibration function
    Asymmetry potential error, sensitivity error, response speed error and standard solution error.
  • Electrode self-diagnosis
    Temperature sensor short-circuit and temperature sensor disconnection.
  • Outside of the measuring range.
  • Converter error.
 
Temperature
compensation
element

Selectable from compensation ON (350Ω (25℃), 500Ω (25℃),1 kΩ (0℃)6.8 kΩ (25℃) and 10 kΩ (25℃)) and compensation OFF.

Temperature-
compensated
range
0℃ to 100℃
Ambient
temperature
−5℃ to 45℃
Relative humidity20% to 85% (without dew condensation)
Storage
temperature
−25℃ to 65℃
Power supplyRated voltage 100 V AC to 240 V AC, 50 Hz/60 Hz, 10 VA (max.)
StructureIndoor-use panel installation type
Panel case: ABS, Terminal: PBT
Panel: water proof structure
Protective structurePanel: IP65 (IEC60529, JIS C0920)
Rear case: IP20, Terminal: IP00
Class II device (IEC61010-1)
Pollution level 2 (IEC61010-1)
Conforming
standards
FCC RuleFCC Part15
External
dimensions
48 (W)  × 96 (H)  × 115 (D) mm
Case depth: approx. 105 mm
MassApprox. 400 g

Request for Information

Do you have any questions or requests? Use this form to contact our specialists. * These fields are mandatory.

Related products

More Aqualog - Water Treatment Plant Analyzer

Automated Organic Analysis & Early Warning Sentinel

More Aqualog Datastream

For Instant Water Quality Reports

More CS-600F

Fiber Optic Type Chemical Concentration Monitor

More CS-620F

Optical Fiber Type Hot Phosphoric Acid Concentration Monitor

More CS-900

Non-Contact Chemical Concentration Monitor

More Glass Electrode 1076A-10C

For measurement of low-conductivity water and non-aqueous solvents.

More HC-200F

Field-installation Type Simplified Fluoride Ion Concentration Meter(Four-Wire Transmission)

More HC-200NH

Field-installation Type Ammonia Nitrogen Meter(Four-Wire Transmission)

More HC-300F

Field-installation Type Simplified Fluoride Ion Concentration Meter(Two-Wire Transmission)

More HD-200

Field-installation Type Dissolved Oxygen Meter (Four-Wire Transmission, Membrane Type)

More HD-200FL

Field-installation Type Dissolved Oxygen Meter (Four-Wire Transmission, Optical Type)

More HD-300

Field-installation Type Dissolved Oxygen Meter(Two-Wire Transmission, Membrane Type)

More HD-480

Panel-mount Type Dissolved Oxygen Meter (Four-Wire Transmission, Membrane Type)

More HD-960L

Dissolved Oxygen Monitor in Low Concentration

More HD-960LR

Dissolved oxygen concentration monitor series for semiconductor manufacturing

More HE-200C

Field-installation Type Electric Conductivity Meter (Four-Wire Transmission, For Low-concentration)

More HE-200H

Field-installation Type Electric Conductivity Meter (Four-Wire Transmission, For High-concentration)

More HE-200R

Field-installation Type Electric Resistivity Meter (Four-Wire Transmission)

More HE-300C

Field-installation Type Electric Conductivity Meter (Two-Wire Transmission, For Low-concentration)

More HE-300R

Field-installation Type Electric Resistivity Meter (Two-Wire Transmission)

More HE-480C

Panel-mount Type Conductivity Meter (Four-Wire Transmission, For Low-concentration)

More HE-480C-GC

Carbon Sensor Conductivity Meter (Low concentration type)

More HE-480H

Panel-mount Type Conductivity Meter (Four-Wire Transmission, For Low-concentration)

More HE-480R

Panel-mount Type Resistivity Meter(Four-Wire Transmission)

More HE-480R(W)

Industrial resistivity meter

More HE-960CA

Citric Acid Monitor

More 514-05

0.5% NaCl Standard Solution

More 514-22

1.41 mS/cm Conductivity Standard Solution

More 514-23

12.9 mS/cm Conductivity Standard Solution

More 514-50

5.0% NaCl Standard Solution