OBS-ONE PM unit

OBS-ONE PM On-board Emissions Measurement System product picture

On-board Emissions Measurement System

On-board PM measurement for real-world results

OBS-ONE PM unit is the industry-leading on-board Particulate Matter (PM) measurement system. It collects PM on a filter paper, using a partial flow gravimetric sampling method, while simultaneously measuring real-time PM. A key feature of this design is the use of a venturi flow meter which enables reliable proportional sampling and accurate exhaust gas flow measurement under transient flow conditions. Combine the GAS unit and PM unit to perform certification tests on heavy duty and non-road vehicles.

Segment: Automotive Test Systems
Division: Emission Measurement Systems
Base product
Manufacturing Company: HORIBA, Ltd.

OBS-ONE PM USA flag EPA CFR part 1065 Compliance

For Certification

  • US EPA CFR part 1065 subpart J
  • Simplify data collection and post-processing regulation requirements by using this measurement method

For R&D

  • Easily compare in-lab test results with real-road test results
  • Support R&D by simulating real-world driving events in the test cell with the Test Automation System STARS

 

◎ The world’s smallest PM measurement system in its class*

     *As of July 2015. Based on our company's research.

  • Easily mounted on any vehicle (modular and front access design)
  • One-touch fitting for module and cable connections

 

◎ The reliable test method for high speed flow rate control

  • PM transient measurement by proportional sampling

 

◎ User-friendly design mounts easily on any vehicle
   (modular and front-access design)

  • One-touch fitting for module and cable connections
  • Cartridge filters are easily changed 

Integrated Operation Software

OBS-ONE and other HORIBA ONE series measurement devices employ a common interface with future expandability. Control and management of each emission measurement device can be integrated into a single controller, as well as provide notifications of system health.

Measuring PrinciplesBatch sampling: Filter gravimetric method
Real-time PM measurement : Diffusion charging method
Measuring Ranges (Real-time PM sensor)0 to 2500 mm/cm3 (Concentration after dilution)
Dilution MethodPartial flow dilution method (Proportional sampling mode/Fixed dilution ratio mode)
Signal for Gas SamplingExhaust gas flow rate: Isolated analog signal (0-10 V)
Flow Rate of Diluted Gas10 to 15 L/min (Under the conditions of 20 deg.C and 101.3 kPa)
Filter HolderDiameter 47 mm, Effective diameter 26.2 mm (Without backup filter)
Particle Pre-classifier (Cyclone)99% penetration of particle size of less than 1 μm
50% cut off point: particle size between 2.5 and 10 μm
Power RequirementsDC 24 V
Power ConsumptionMax. 0.6 kVA
Dimensions350(W) x 470(D) x 460(H) mm (Excluding controller and protruding objects)
MassApprox. 45 kg (Excluding controller)
Operating ConditionsTemperature: 0 to 40 deg.C (During operation)
Relative humidity: less than 80%  Altitude: 0 to 2000 m above sea level

System Configuration

Combination of PM measurement unit and GAS measurement unit

RDE Test with Portable Emission Measurement System (PEMS)
RDE Test with Portable Emission Measurement System (PEMS)
In 2016 the European Commission´s (EC) Member States agreed on new procedures and requirements for light-duty vehicle type approval certification introducing Portable Emission Measurement System (PEMS) for vehicle testing on the road.
RDE tests on the chassis dynamometer
RDE tests on the chassis dynamometer
Real driving emissions with RDE CoDriver
Real driving emissions with RDE CoDriver
Real Driving Emission (RDE) tests confirm the results produced during an emissions test on a chassis dynamometer to ensure that vehicles meet the set limits in the real world.
OBS-ONE PM Brochure English
CategoryDocuments
Size 0.4 MB
FiletypePDF

REQUEST FOR INFORMATION

Do you have any questions or requests? Use this form to contact our specialists.

Related products

CVS-ONE
MoreCVS-ONE
Constant Volume Sampler
FTX-ONE
MoreFTX-ONE
FTIR Exhaust Gas Analyzer
MDLT-ONE
MoreMDLT-ONE
Micro Dilution Tunnel
MEDAS
MoreMEDAS
Multi-Function Efficient Dynamic Altitude Simulator
MEDAS Humidity Module
MoreMEDAS Humidity Module
Altitude Simulator
MEDAS Temperature Module
MoreMEDAS Temperature Module
Altitude Simulation
MEXA-2000SPCS series
MoreMEXA-2000SPCS series
Solid Particle Counting System
MEXA-ONE
MoreMEXA-ONE
Motor Exhaust Gas Analyzer
MEXA-ONE-QL-NX
MoreMEXA-ONE-QL-NX
Laser Spectroscopic Motor Exhaust Gas Analyzer
OBS-ONE GS Unit
MoreOBS-ONE GS Unit
On-board Emissions Measurement System
OBS-ONE PN Unit
MoreOBS-ONE PN Unit
On-board Emissions Measurement System
RDE CoDriver
MoreRDE CoDriver
Mobile app for RDE testing
VULCAN
MoreVULCAN
Chassis Dynamometer
VULCAN Evo
MoreVULCAN Evo
Chassis Dynamometer
AP-370 series
MoreAP-370 series
Air Pollution Monitor
APDA-371
MoreAPDA-371
Ambient Dust Monitor
APDA-372
MoreAPDA-372
Ambient Dust Monitor
AQMS
MoreAQMS
Air Quality Monitoring System
HU-200SS
MoreHU-200SS
Industrial MLSS meter (Four-Wire Analyzer)
MESA-50
MoreMESA-50
X-Ray Fluorescence Analyzer
MESA-50K
MoreMESA-50K
X-Ray Fluorescence Analyzer
MEXA-2000SPCS series
MoreMEXA-2000SPCS series
Solid Particle Counting System
PX-375
MorePX-375
Continuous Particulate Monitor with X-ray Fluorescence
TFH-01/47
MoreTFH-01/47
PTFE Filter/TFH membrane
XGT-7200
MoreXGT-7200
X-ray Analytical Microscope
XGT-9000
MoreXGT-9000
X-ray Analytical Microscope