PI-200-SP

Single Point Process Raman Analyzer

For industries that demand real-time chemical analysis at a single sampling point, the HORIBA PI-200-SP Single-Point On-line Raman Analyzer delivers efficiency, precision, and innovation. Unlike traditional analyzers that rely on complex sampling systems prone to maintenance issues and delays, the PI-200-SP offers a direct, in-process measurement solution that streamlines your operations and reduces downtime.

Segment: Process And Environmental

Division: Process & Environmental General

Manufacturing Company: HORIBA Instruments Incorporated

Revolutionizing Single-Point Analysis Mindsets

No Sampling System Required: Traditional analyzers often depend on costly and complex sampling systems, which introduce challenges like contamination risks, high maintenance costs, and process delays. The HORIBA PI-200-SP eliminates these concerns, offering direct measurements with more relaxed sampling requirements for smoother, more efficient analysis.

Streamlined Operations: With no need for bulky extraction systems or complicated installations, the PI-200-SP simplifies your process monitoring, helping you reduce costs and focus on operational excellence.

With the PI-200-SP Single-Point Raman Analyzer, you’ll experience a more efficient, reliable, and innovative approach to process monitoring. By eliminating the challenges of traditional sampling systems, the PI-200-SP empowers you to optimize your operations with ease.

Spectrograph

Aperture:	f/2.0
Focal length:	135 mm
Resolution:	~ 4cm^-1@ 785 nm excitation
CCD camera:	1024 x 127 pixels, pixel size 26 µm
Camera cooling:	4-stage TE-cooling <-82°C
CCD chip is deep depleted and back illuminated for higher NIR-quantum efficiency
Ruled Grating with 1200 lines/mm.
Spectral coverage (adjustable):	~250 to 2650 cm^-1 (785 nm excitation)
High performance, anti-reflection, aberration-corrected optics
Spectrograph, temperature controlled (~ 33°C) for added stability
Image curvature at exit plane < 0.5 pixel over full height of CCD array

Multiplexer (optional upgrade)

Channels	9
¾ horse power servo motor using Soloist Motion Controller
Channel number 1 is set aside as a built-in performance monitor to check instrument performance hourly
Design life:	> 20 years

Laser

Power > 450 mW
785 nm standard; other wavelengths available upon request
Laser life expectancy:	> 2-4 years
Optional upgrade:	Redundant backup laser, with automatic switching.

Calibration

Automatic for both x-axis and y-axis

Temperature control for Laser and Spectrograph

Raman Probe

Incorporating 10^-8 Rayleigh filtering
Fiber coupling with slit array:	100 µm x 3.3 mm tall
Fiber optic probe lengths:	Up to 1150 ft (350 m)

Optical Fiber

Dual core, low OH, multimode fibers (200-micron and 400-micron diameters) cable

Cable OD is 9.2 mm, fabricated with tough, LSZH Outer jacket with aramid yarn strength member

Dummy inserts for increased stiffness

Cable can be laid in cable tray or in conduit.

Cable is cut to length, terminated and tested at factory.

I/O Included:	16 Digital Inputs, 8 Digital Outputs, 8 Contact Alarm Relays, Four 4 to 20mA
Power requirements:	On-line 10 Amps
Outputs:	TCP/IP, RS-485, and RS-232
Certifications	Lasers CE, CDRH-certified, and EN60825-1 Analyzer ETL (UL-61010)
Dimensions	32" (81.28 cm W) x 79" (200.66 cm H), 477lbs

Petrochemistry is a process in which basic products are generated using oil and natural gas as raw materials in order to produce base set of chemical compounds (derivatives) for diverse related industries, such as synthetic fibers and synthetic resins. In Japan, naphtha is mainly used as the raw material for this process. In other countries, however, less expensive manufacturing of derivatives such as ethylene manufacturing from non-naphtha materials (e.g., shale gas and coal).