SPARC Engine
μ§λ₯ν 컨νΈλ‘€λ¬ νλ«νΌ
SPARCλ μ°¨λ, ν΄μ λ° ν곡 μ°μ£Ό μμ§ ν μ€νΈμ μ μ©λλ μ΅μ²¨λ¨ ν μ€νΈ μ€ν λ 컨νΈλ‘€λ¬μ λλ€. β
βκ³ κΈ νλμ¨μ΄ λ° μννΈμ¨μ΄μ μ§κ΄μ μΈ μλμ μν ν°μΉ κΈ°λ₯μ ν΅ν΄ μ΅κ³ μ μ±λ₯μ μ 곡ν©λλ€. λκΈ°κΈ°(DYNASPM), λΉλκΈ°κΈ°(DYNAS3), μλλ ₯κ³(DT) λ° μλ₯ λλ ₯κ³(WT)κ° μλ ν μ€νΈ μ€ν λμ ν λ€ μ ν리μΌμ΄μ μ μ ν©ν©λλ€.β
βμ μ΄, λͺ¨λν°λ§ λ° λ°μ΄ν° μμ§μ λν λͺ¨λ μ°¨λ ν μ€νΈ μꡬ μ¬νμ μ λ°μ μμ°λ₯΄λ©° ν ν¬, μλ, μ€λ‘ν μμΉ λλ μμ μ ν κ°λ₯ν νλΌλ―Έν° xμ μ μ΄μ μ΅μ νλμ΄ μμ΅λλ€.
Key Features
- Control loop speed up to 10 kHz
- Preconditioning of I/O signals with up to 120 kHz via intelligent I/O card
- 1 kHz Ethernet interface to STARS test stand automation and open interfaces to other automation systems (via Ethernet or CAN bus)
- Open simulation interface for simulation models like MATLAB / Simulink and via IPG CarMaker
- Suitable for steady-state, transient and high dynamic simulations
- Fully integrated into the HORIBA safety concept with the latest generation of safety modules
COMPATIBLE 
The latest SPARC Engine generation builds upon the proven concept of the SPARC digital controller family. Backwards compatibility and a simple one-to-one replacement allow for an easy upgrade of existing engine test stands.
SIMPLE 
The updated operating unit with a large 10.1β touch display allows for an intuitive manual operation of demand values, feedback values, status signals and messages of the test stand.
EXPANDABLE 
The SPARC Engine controller can be fully integrated into all test automation systems due to its flexible and open interfaces. It is also upgradable with further options, including E-Gas Simulation, CAN-Gas via STARS, Road Load Simulation and Open Simulation.
SMART 
Integrated testing features are available for the identification of test stand characteristics and control loop setup parameters. They also enable an automatic engine mapping to achieve highest control response and accuracy.