Oil Content Analyzer
OCMA-500 to measure concentration of oil contained in drainage and environmental water.
After injecting the water sample and solvent, all you have to do is press the start button,and the system will automatically conduct the monitoring operation from oil extraction to sample measurement and draining. With no more troublesome operations like opening/closing the drainage valve, monitoring is speeded up.In addition, the color graphic LCD and the backlit extraction tank have improved operability.
How to measure:
Backlit extraction tank
The extraction tank is equipped with LEDs. Illuminating the tank makes it easy to check the phase separation between sample and solvent and set the extraction time.
Before extraction After extraction
*The color depends on the sample.
The OCMA-500 cuts solvent consumption by 20% compared with our previous products, reducing environmental impact. It also reduces the running cost.
Measurement can be switched automatically or manually.
Stirring, measurement and draining are automatically conducted after injection of the sample.
You can conduct measurement operation at any timing while checking the extraction state.
■Example of manual mode
Fully used in Various Applications
For monitoring final discharge water
Ballast water, Bilge
For monitorng discharge from ships
Vehicle mentenance site and gas station
For monitoring water quality in sorrounding areas
Water quality survay based on environmental standard.
|Product name||Oil content analyzer|
|Measurement method||Solvent extraction - non-dispersive infrared absorption analysis method|
|Measured objects||Substances extracted from sample water into solvent and having infrared absorption near a wavelength from 3.4 μm to 3.5 μm|
|Measurement range||0 mg/L to 200 mg/L|
|Resolution||For mg/L 0 to 99.9: 0.1, 100 to 200: 1|
For mg/g, mg/kg, mg/PC 0 to 9.99: 0.1, 10.0 to 99.9: 0.1, 100 to 200: 1
|Repeatability||0 mg/L to 9.9 mg/L: ±0.3 mg/L.|
10.0 mg/L to 99.9 mg/L: ±2.1 mg/L.
100 mg/L to 200 mg/L: ±5 mg/L. * For standard liquids
|Display method||3.5 inches, 320×240 dots, Backlight Color graphic LCD|
|Calibration method||Zero, span calibration|
|Amount of test sample required||Sample water : Solvent = 2:1|
|Amount of extraction solvent required||8 mL|
|Extraction method||Built-in extractor|
|Ambient operating temperature||0°C to 40°C (no condensation)|
|Power supply||AC 100 V to 240 V ±10%, 50/60 Hz|
|Power consumption||AC 100 V: Approx. 60 VA, AC 240 V: Approx. 90 VA|
|External dimensions||342 (H) × 200 (W) × 313 (D) mm|
|Mass||Approx. 7 kg|
|External output||Output to a USB memory stick|
Do you have any questions or requests? Use this form to contact our specialists. * These fields are mandatory.