The EMIA-Expert Carbon/Sulfur Analyzer is based on HORIBA’s widely respected expertise in Non-Dispersive Infrared (NDIR) technology.
It offers improved the cleaning efficiency, enhanced user-friendly software, durability, operability and maintenance to ensure efficient measurements and its shortened cycle time accelerates your development and manufacturing speed.
EMIA-Expert has advanced functions to realize high performance analysis in addition to standard functions of EMIA-Pro.
Enables measurement of ultra-low carbon concentration with high accuracy by eliminating hydrocarbon impurities in the carrier gas.
Samples which are moist or that generate water during analysis may cause a small error for the analysis of sulfur. This is due to the evolved water absorbing the SO2 gas. Using the heating filter, the absorption of SO2 by moisture is prevented, and highly accurate sulfur analysis is guaranteed.
The unique newly-developed cleaning mechanism (patent pending) clears the dust in the furnace, allowing the operator to continue to use the EMIA-Expert/Pro without maintenance cleaning for up to 200 measurements*.
* It depends on sample and measurement condition
Before measurement After 200 measurements
EMIA Series can complete one measurement cycle, “measurement-display result-cleaning”, in 70 seconds (i.e. about 50 samples/hour)
With the latest innovations the cleaning time for the EMIA Series instruments is typically half of that of our conventional models. The flat design around the crucible stand and simple design around the furnace also simplify user access for cleaning.
Flat design around the crucible stand
A critical focus was to ensure that the EMIA-Expert/Pro Series was “easy-to-use”. In particular, we focused on the layout, operating menus and functions.
We have included a self-diagnostic monitor checking capability to check the status of the connected device, an alarm function and we have expanded 3 navigators to facilitate daily operation.
This function uses the recommended best measurement flow and operating condition based on our experience.
Automatic diagnosis system and troubleshooting navigator.
Periodic preventive maintenance work navigator by videos and photos.
The customer can extend the system’s functionality at any time, even after installation, depending upon their needs.
* Auto-sampler (20 positions)
* Halogen trap unit
|Required sample amount||1g ± 0.1g|
|Typical Meas. time||70 seconds/cycle|
|Carbon||Meas. Range (m/m)||0.6 ppm - 10.0%|
|Blank accuracy||σn-1≦ 0.3 ppm|
|Sulfur||Meas. Range (m/m)||0.6 ppm - 1.0%|
|Blank accuracy||σn-1 ≦ 0.3 ppm|
|Sample meas. Accuracy||Carbon||σn-1 ≦ 0.3 ppm(less than 20 ppm) |
σn-1 ≦ 1.0 ppm or RSD≦0.5%(more than 20 ppm)
|Sulfur||σn-1 ≦ 0.3 ppm(less than 20 ppm) |
σn-1 ≦ 1.0 ppm or RSD≦0.75%(more than 20 ppm)
(Purity; 99.5%, Pressure; 0.3-0.33 MPa)
(Purity; 99.5%, Pressure; 0.35-0.38 MPa)
|Power||200/220/240V, 50/60Hz, 5kVA|
|Dimensions||Main unit*||500(W) x 725(D) x 710(H) mm|
|Purifier unit||160(W) x 560(D) x 512(H) mm|
|Mass||Main unit||approximately 134 kg|
|Purifier unit||approximately 21 kg|
|Data processing and operation||USB data communication with PC Windows 8.1|
Touch panel or Key board and mouse operation
|Model name||EMIA-20E: Carbon/Sulfur|
Note) "ppm" is equal to mg/kg.
*Except piping parts, projection parts (D:79mm) and flow meter on the back side.
The crucible pre-heating unit; FK-100 with automatic transportation function to heat a ceramic cruible at 1100 degree in 10min. before analysis.
Automation crucible loading and disposing unit. Up to 20 pcs of crucible are available to be set.
Low carbon blank and high dimension tolerance for high precision analysis.
High-purity materials which support stable analysis: Tungsten(W), Tin(Sn), Copper(Cu), Iron(Fe)
Do you have any questions or requests? Use this form to contact our specialists. * These fields are mandatory.